Why doesn't Shanghai allow the Wuling Mini to be licensed?

1 Answers
Jodi
07/29/25 3:35pm
Shanghai has temporarily suspended issuing green license plates for the Wuling Hongguang Mini because this new energy vehicle has a relatively low price and small size, which do not meet the standards for green license plates. Here is more information about the Wuling Hongguang Mini: 1. Configuration: The Wuling Hongguang Mini's electric motor has a maximum power of 20 kW and a maximum torque of 85 Nm. The vehicle uses lithium-ion batteries throughout its lineup, which are stronger and have higher energy density. The front suspension uses MacPherson independent suspension, while the rear suspension uses a multi-link non-independent suspension. 2. Dimensions: The Wuling Hongguang Mini has a wheelbase of 1940 mm, with a length, width, and height of 2917 mm, 1493 mm, and 1621 mm, respectively. It is a 3-door, 4-seater car with a curb weight of around 700 kg.
Was this review help?
8
1
Share
More Forum Discussions

Does the highway toll-free period refer to the time of entering or exiting the highway?

During holidays, the highway toll-free period is calculated based on the time of exiting the highway. Below are the relevant details about holiday highway toll exemptions: 1. Vehicle eligibility for toll-free passage: The toll exemption applies only to passenger vehicles with 7 seats or fewer (including 7 seats), as well as motorcycles permitted to operate on highways. 2. Criteria: If you enter the highway during the toll-free period but exit outside of it, you will not qualify for toll-free passage. Conversely, if you enter outside the toll-free period but exit during it, you will still be eligible for toll-free passage.
15
5
Share

What is the fuel tank capacity of the 2011 Buick Excelle in liters?

The 2011 Buick Excelle with a 1.6L engine has a fuel tank capacity of 60 liters. This data is official, and owners of the 2011 Buick Excelle 1.6L can also check this information on the vehicle's configuration sheet. The 2011 Buick Excelle 1.6L uses 92-octane gasoline, with an NEDC combined fuel consumption of 8L/100km. A full tank can travel approximately 750 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount may exceed the marked capacity. Other factors that affect fuel consumption include: Vehicle weight: There is a direct correlation between vehicle weight and fuel consumption. A 10% reduction in weight can lead to a corresponding reduction in fuel consumption. Vehicle aerodynamics: A lower drag coefficient results in lower fuel consumption, while a higher drag coefficient increases fuel consumption. Tire pressure: Low tire pressure increases friction and adhesion, leading to higher fuel consumption. Driving habits: Aggressive acceleration and frequent braking can significantly increase fuel consumption. Wind direction: Driving with a tailwind reduces fuel consumption, while driving against a headwind increases engine workload and fuel consumption. Road conditions: Fuel consumption is lower on flat roads and higher on rough or steep roads. Additional electronic devices: Using extra equipment like air conditioning during driving increases fuel consumption.
14
4
Share

What Causes High Instantaneous Fuel Consumption?

When starting the car, the accelerator is often pressed deeply to accelerate, which results in a large throttle opening, increased engine air intake, and consequently more fuel injection. The computer calculates instantaneous fuel consumption based on high fuel volume and low vehicle speed, leading to high readings. High instantaneous fuel consumption does not necessarily indicate high average fuel consumption. Below is relevant information about instantaneous fuel consumption: 1. Introduction to Instantaneous Fuel Consumption: Instantaneous fuel consumption refers to the fuel consumption value of a car at a specific moment. The value of instantaneous fuel consumption at a single point is not very meaningful, as it constantly changes under different vehicle states and driver operations. However, connecting the instantaneous fuel consumption values under various states into a curve can provide significant reference value. 2. Significance of Observing Instantaneous Fuel Consumption: (1) By observing instantaneous fuel consumption, you can understand the fuel consumption when the vehicle is stationary and the engine is idling; (2) Through instantaneous fuel consumption, you can learn the fuel consumption per 100 kilometers at different speeds (the drag coefficient, which significantly impacts fuel consumption, is proportional to the square of the speed), thereby identifying the vehicle's most economical speed; (3) For vehicles with computer-controlled fuel injection, instantaneous fuel consumption can show that fuel consumption is "0" during gear coasting (the fuel injector stops injecting fuel).
7
5
Share

What documents are needed to ride a motorcycle sports car?

Riding a motorcycle sports car requires a driver's license, vehicle registration, and the motorcycle must display a motor vehicle license plate to be road legal. Below is relevant information about motorcycle sports cars: 1. Classification: There are two types of motorcycle sports cars, one is the NK street sports bike, and the other is the more streamlined sports bike. The street sports bike has a very stylish appearance, lacks a front fairing, and has a seat that differs from the streamlined sports bike. The streamlined sports bike is suitable for track racing and high-speed riding. 2. Anti-lock Braking System (ABS): The anti-lock braking system is a crucial safety feature configuration for motorcycles.
9
3
Share

How to Distinguish Between Three-Cylinder and Four-Cylinder Engines?

A three-cylinder engine has three exhaust manifolds and intake manifolds, while a four-cylinder engine has four exhaust manifolds and intake manifolds. Below is a relevant introduction to the differences between three-cylinder and four-cylinder cars: 1. Mechanical Structure: At the mechanical structure level, the main difference between three-cylinder and four-cylinder cars lies in the number of cylinders. Since a three-cylinder engine has one fewer cylinder than a four-cylinder engine, its size is smaller. Many consumers might think that having one fewer cylinder would result in significantly less power, but this is not the case. This is because four-cylinder engines are mostly naturally aspirated, while three-cylinder engines are turbocharged, and some three-cylinder engines have parameters that are not much different from four-cylinder engines. 2. Advantages of Three-Cylinder Engines: Three-cylinder engines are undoubtedly more fuel-efficient than four-cylinder engines. For engines of the same displacement, fewer cylinders mean less power output. At the same RPM, the volume of air drawn in per unit time is less, the fuel injection amount is also reduced, and the fuel consumption naturally decreases. Three-cylinder engines of the same displacement are lighter and more compact than four-cylinder engines. The lightweight and compact design of three-cylinder engines aligns with the trend of vehicle lightweighting and also provides better weight distribution for front-engine small cars, resulting in better handling.
17
3
Share

What is the fuel consumption of the Volkswagen Tharu 2.0t?

Volkswagen Tharu 2.0t has a comprehensive fuel consumption of approximately 8.6 liters per 100 kilometers. Below is the relevant introduction of the Volkswagen Tharu: 1. Power: The Tharu is equipped with 1.4T and 2.0T turbocharged engines, with maximum power outputs of 110kW and 137kW respectively, and peak torques of 175Nm, 250Nm, and 320Nm. 2. Interior: The interior features a horizontal design, using IMD material panels to enhance the premium feel. Large panels integrate the instrument cluster, display screen, and air vents into a unified design. 3. Exterior: The exterior adopts the Rock-Cutting design concept, with raised lines on the ridge-style hood to emphasize strength. The wide-body dual U-shaped full LED headlights are angled upwards, and the grille bars extend to the headlights.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.