Why Doesn't Mercedes CarPlay Pop Up Automatically?

1 Answers
VonDawson
07/29/25 10:38pm
There are several reasons why Mercedes CarPlay does not pop up automatically: Non-original data cable: If you are not using an original data cable, try replacing it with the original one, then click the CarPlay button on the navigation screen. Check if the phone data cable is damaged or broken, and whether there is any foreign matter attached to the metal contacts on the USB plug or phone plug or if the surface is oxidized. The car has not activated the feature: If Mercedes CarPlay does not pop up automatically, it may be because the CarPlay feature is not activated. You can activate it yourself and then check again. Once CarPlay is successfully enabled, you can lock the phone screen and use the car's knob or Siri to control CarPlay functions such as navigation, phone calls, and music playback.
Was this review help?
14
3
Share
More Forum Discussions

How long does it take to pick up the BYD Song Plus DM-i?

It takes about three months to pick up the BYD Song PLUS DM-i. Below is an introduction to the BYD Song PLUS-DM-i: 1. Configuration: According to official data, this version has a combined power output of 173kW and is equipped with three core technologies: the Xiaoyun-PHEV dedicated 1.5L high-efficiency engine, the EHS hybrid system, and the DM-i Super Hybrid dedicated power-type Blade Battery. 2. Interior: The Song PLUS-DM-i features an exclusive "Solar Eclipse Blue + Sky Gray" color scheme, and its multi-layer floating design gives the cabin a sense of depth. 3. Driver assistance features: BYD has set a "high-standard entry-level" benchmark for this model. Official data shows that the Song PLUS-DM-i comes standard with a 12.8-inch 8 adaptive rotating floating Pad, an NFC car key, a Dirac 9-speaker intelligent music cockpit, OTA remote upgrades, a million-pixel 360° panoramic camera, front and rear six airbags, and VTOL 220V power output, among other features.
17
1
Share

Can You Drive When Water Submerges the Exhaust Pipe?

You can still drive when the car's exhaust pipe is submerged in water, but you should drive at a low gear and maintain a steady speed. Below are some relevant tips for driving in rainy weather: Precautions for driving in the rain: 1. Check the windshield wipers: Especially important for nighttime driving during heavy rain. 2. Maintain a safe distance and control your speed: Roads become slippery when wet, reducing tire traction. If you drive too fast, the increased inertia means that in an emergency, the braking distance is 20%–40% longer than in good weather, significantly reducing braking effectiveness and increasing the risk of accidents. 3. Do not rush to avoid puddles: If you swerve or immediately brake to slow down upon seeing standing water, the vehicles behind you may not react in time, leading to potential accidents. Estimate the water depth visually—normally, if the water is no deeper than 15 cm, you can drive at a normal speed. When driving through water, control the throttle and avoid pressing it too hard, which could cause the engine load to spike suddenly, potentially stalling the engine or causing the tires to lose traction.
16
5
Share

What brand is the audio system in the Audi A4?

Audi A4's audio system is from the Bang & Olufsen car audio system. Since its establishment in 1925 in Struer, Denmark, Bang & Olufsen, a world-leading audio-visual brand, has been globally renowned for its continuous creation of audio and video products that perfectly combine cutting-edge technology with emotional appeal, fully embodying Bang & Olufsen's spirit of challenging conventions. The technical specifications of car audio systems include: 1. Output power: Currently, most head units indicate music power, ranging between 40W and 60W, and the power should not be too large. 2. Frequency response: The frequency range that the human ear can hear is between 20Hz and 20KHz, so this specification should at least cover this range, and the wider, the better. 3. Signal-to-noise ratio: This refers to the ratio of music signal to noise. Generally, high-end car audio systems have a ratio above 90DB, and the higher this value, the better. 4. Harmonic distortion: This specification reflects the fidelity of sound reproduction. The smaller the value, the higher the fidelity, and the better the audio effect.
14
5
Share

What are the reasons for hearing a clicking sound when starting the car but failing to ignite?

If your car makes a clicking sound when starting but fails to ignite, it could be due to issues with the starter motor, insufficient battery power, low voltage, or the gear not being in the P position during startup. Here are the specific reasons: 1. Starter motor problem: When you turn the key and hear a clicking sound but the car doesn't start, the clicking noise is either the relay or the starter motor working, indicating that the starter motor has responded but lacks the power to turn the flywheel, resulting in the failure to start. 2. Insufficient battery power: The clicking sound during a failed ignition could be due to low battery power, which may result from leaving the headlights on when parked or using too many external electrical devices. 3. Low voltage: Low voltage can be caused by an old battery that has been used for too long, leading to reduced storage capacity, or by listening to music or running the air conditioning while the engine is off. 4. Gear not in P position during startup: The P gear is the parking gear, used when the car needs to be parked for an extended period.
4
2
Share

How to Set Up Automatic Sensing for the Mercedes-Benz E300 Wipers?

Mercedes-Benz vehicles are equipped with automatic wipers, and the switch for the automatic wipers is located on the stalk below the steering wheel, marked clearly. More relevant information is as follows: 1. Wiper Stalk: First, it's important to note that because Mercedes-Benz vehicles use a gearshift design, the traditional wiper stalk has been replaced by the gearshift lever. Therefore, the wiper stalk is now positioned on the turn signal stalk. The outermost part of the turn signal stalk has a button, which is the function for spraying windshield washer fluid. Pressing it will activate the spray. 2. The Rotary Switch Has Five Positions: These are wiper off, slow automatic sensing, fast automatic sensing, manual slow wiping, and manual fast wiping. While driving, rotate the switch to the automatic sensing position, and the vehicle's sensors will automatically activate the wipers based on the external rainfall. 3. Automatic Wiper System: This is an automated vehicle feature. When it rains, raindrops fall on the windshield, and the vehicle's sensors detect the presence of water on the glass. Based on the sensed data, the system automatically adjusts the wipers to clean the windshield. It can also adjust the wiper speed according to the amount of rain and will automatically stop when there is no rain. During car washing, it's also important to clean the wipers, especially any residual sand particles. If not cleaned regularly, this can cause accelerated wear on the wipers.
5
5
Share

What is the installation direction of the hydraulic cylinder seal ring?

Hydraulic cylinder seal rings are installed in a counterclockwise direction. Below are relevant extended details: 1. During installation, both seals should face inward. Their function is to block the oil. The hydraulic cylinder piston typically has two oil seals installed back-to-back. When port A receives oil, the pressure oil enters the lip of the seal—the greater the pressure, the tighter the lip presses against the cylinder wall. The same applies to port B. The piston rod seal has two lips: the smaller lip faces the direction of the piston rod threads. The smaller lip serves two purposes: dust prevention and wiping off dust or debris from the piston rod. 2. Piston-type hydraulic cylinders can be divided into single-rod and double-rod structures, with fixing methods including cylinder body fixing and piston rod fixing. They can also be categorized as single-acting or double-acting based on hydraulic pressure application. 3. In single-acting hydraulic cylinders, pressure oil is supplied to only one chamber, enabling unidirectional movement via hydraulic pressure, while reverse movement relies on external forces (such as spring force, gravity, or external loads). In contrast, double-acting hydraulic cylinders achieve bidirectional piston movement by alternately supplying oil to both chambers via hydraulic pressure. 4. Only one side of the piston has a piston rod, resulting in different effective working areas in the two chambers. With the same oil supply volume, piston speed varies depending on which chamber receives oil. When overcoming the same load force, different oil supply pressures are required depending on the chamber receiving oil. Alternatively, after system pressure is set, the load forces that the hydraulic cylinder can overcome in both directions differ.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.