Why doesn't an automatic transmission car move when releasing the brake in reverse?

What to Do When Tire Pressure Is Low?

Methods to handle low tire pressure: 1. Visually inspect whether the tire can still continue to drive. If possible, drive to the nearest tire repair shop for handling; 2. If the tire pressure is too low to drive, use a car inflator pump to inflate it if available, then go to the nearest repair shop for inspection; 3. Replace the spare tire and then go for repairs; 4. Low temperature causing low tire pressure is a normal phenomenon, and it will return to normal once the car starts running; 5. Reinstall the tire edge with the wheel hub. Tire pressure refers to the air pressure inside the tire, which is the blood pressure of the car. The level of tire pressure plays a crucial role in the performance and power of the car.

10

2

Share

What Does Cylinder Stroke Refer To?

Cylinder stroke refers to the reciprocating travel distance of the piston within the cylinder. It is the distance from the top dead center (TDC) to the bottom dead center (BDC) of the piston movement, which is one of the factors determining an engine's performance. Below is an introduction to automotive cylinders: Introduction to Cylinders: A cylinder is a cylindrical metal component that guides the piston in linear reciprocating motion inside the cylinder. In an engine, air expands within the cylinder to convert thermal energy into mechanical energy. In a compressor, gas is compressed by the piston to increase pressure. The cylinder in an internal combustion engine is the cavity where the piston moves, serving as the piston's track. Combustion and expansion of fuel occur here, and the cylinder walls help dissipate some of the residual heat from combustion, maintaining the engine's normal operating temperature. Cylinders come in two main types: integral and single-cast. Single-cast cylinders are further divided into dry and wet types. When the cylinder and engine block are cast as one unit, it is called an integral cylinder. When cast separately, the single-cast cylinder is referred to as a cylinder liner. A cylinder liner that directly contacts the cooling water is called a wet liner, while one that does not is called a dry liner. Cylinder Structure: A cylinder consists of a cylinder barrel, end covers, piston, piston rod, and seals. Types of Cylinders: In pneumatic transmission, cylinders are actuators that convert the pressure energy of compressed gas into mechanical energy. Cylinders performing linear reciprocating motion can be further categorized into single-acting cylinders, double-acting cylinders, diaphragm cylinders, and impact cylinders.

19

3

Share

Which License Class is Required for Automatic Transmission Vehicles?

Automatic transmission vehicles require a Class C2 driver's license. A Class C2 license permits the operation of small automatic transmission vehicles, which include small and micro automatic passenger cars, as well as light and micro automatic freight vehicles. This category covers small buses with fewer than 9 seats, featuring a maximum design total mass not exceeding 4,500 kilograms, length ≤600 mm, width ≤200 mm, and height ≤250 mm. Classification of Class C Driver's Licenses: Class C licenses are categorized into C1, C2, C3, C4, and C5. In addition to C1-class vehicles, a C1 license holder may also operate vehicle types permitted under C2, C3, and C4 licenses. A C2 license authorizes driving small automatic transmission vehicles. C3 license holders can operate low-speed freight vehicles and C4-class vehicles, while a C4 license is for three-wheeled motor vehicles. The C5 license is designated for disabled individuals (specifically those with right lower limb disabilities, bilateral lower limb disabilities, hearing impairments, absence of the right thumb, or end-joint finger defects) to operate special small automatic transmission passenger vehicles.

13

3

Share

How to Close Car Windows After the Engine is Turned Off?

Methods to close car windows after the engine is turned off: If the car does not have an automatic window lift function, you can only restart the ignition to close the windows. For cars with an automatic window lift function, the windows will automatically close about 5 seconds after the engine is turned off, though this may vary depending on the brand and model. For example, models like the Golf or Mercedes-Benz B-Class allow the use of the remote key to close the windows. By pressing and holding the lock button on the remote for about 5 seconds, all windows will automatically close. The design, structure, and quality of car windows significantly impact the driver's visibility, passenger comfort, aesthetic appearance, and aerodynamic characteristics. Typically, car windows are designed as curved, sealed structures. Rubber sealing strips are used between the window frame and the glass to connect them, providing both sealing and cushioning effects. This prevents damage to the windshield in case of deformation due to stress on the car body.

16

2

Share

How to One-Touch Window Roll-Up in BMW 5 Series?

BMW 5 Series one-touch window control method: You can operate the one-touch window function using the lock and unlock buttons on the key fob. Hold the lock button for more than 3 seconds to roll up and close all windows simultaneously; similarly, hold the unlock button for about 3 seconds to synchronously lower all four windows. The BMW 5 Series is a premium sedan featuring a front double-wishbone independent suspension and rear multi-link independent suspension across all models. Powering the 5 Series is a newly developed six-cylinder engine paired with an 8-speed automatic transmission. In terms of dimensions, the BMW 5 Series measures 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3150mm.

8

4

Share

What does MG Trophy mean?

MG Trophy is an engine technology under the MG brand. Trophy refers to MG's Blue Core engine technology, which is used in the MG6 model. The MG6 is a compact sedan under the MG brand, with dimensions of 4704mm in length, 1848mm in width, and 1466mm in height, and a wheelbase of 2715mm. The MG6 is equipped with two types of engines: a low-power version 1.5-liter turbocharged engine and a high-power version 1.5-liter turbocharged engine. The high-power version 1.5-liter turbocharged engine delivers 181 horsepower and a maximum torque of 285 Nm, while the low-power version 1.5-liter turbocharged engine produces 169 horsepower and a maximum torque of 250 Nm.

13

1

Share

Why doesn't an automatic transmission car move when releasing the brake in reverse?

What to Do When Tire Pressure Is Low?

What Does Cylinder Stroke Refer To?

Which License Class is Required for Automatic Transmission Vehicles?

How to Close Car Windows After the Engine is Turned Off?

How to One-Touch Window Roll-Up in BMW 5 Series?

What does MG Trophy mean?

What is the trunk size of the Lavida?

How to reset the tire pressure on a Great Wall H6?

How to Use Cruise Control on Camry?

How Long Does Coolant Last Under Normal Consumption?