Why Does the XRv Tire Pressure Yellow Light Come On for No Reason?

1 Answers
Robles
07/29/25 7:26pm
The reason why the XRv tire pressure yellow light comes on for no reason is that the tire pressure of the four tires is not within the normal range. Generally, this is caused by slow air leakage leading to insufficient tire pressure or excessive tire pressure, which triggers the tire pressure warning. There are usually three main reasons for abnormal tire pressure: Abnormal Tire Pressure: The warning light typically activates when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire Pressure Monitoring Not Reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previously recorded data, causing the tire pressure warning light to illuminate. Simply resetting the tire pressure monitoring system will resolve this issue. Damaged Tire Pressure Sensor: The tire pressure sensor, which is installed inside the tire and connected to the tire inflation valve, monitors the tire pressure. If the sensor is damaged due to impact while driving, it can also cause the tire pressure warning light to come on. In such cases, the only solution is to replace the sensor with a new one.
Was this review help?
19
5
Share
More Forum Discussions

Does low tire pressure mean there is no air?

Low tire pressure in a car means that the air pressure inside the tire is insufficient, resulting in underinflated tires. In this case, tire inspection and pressure adjustment are necessary. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and easy deviation, which are factors detrimental to driving safety; Increases the movement of various parts of the tire, causing abnormal heating due to excessive rolling; Reduces the functionality of the cords and rubber, leading to delamination or cord breakage, excessive friction with the rim, resulting in damage to the tire bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts; Increases tire body deformation, making the tire side prone to cracks, and generates flexing motion, leading to excessive heat, rubber aging, fatigue of the cord layer, and cord breakage. It also increases the tire's contact area with the ground, accelerating shoulder wear.
10
2
Share

What Should Car Owners Pay Attention to in Vehicle Damage Assessment?

Here are the key points to note for vehicle damage assessment: 1. Note 1: Determine the repair method for the damaged parts before vehicle maintenance. 2. Note 2: Confirm the total cost of vehicle repairs. 3. Note 3: Try to conduct the damage assessment and repairs at the same location. 4. Note 4: Complete the damage assessment in one go as much as possible to avoid a secondary assessment. Relevant information about vehicle damage assessment is as follows: 1. Introduction 1: Vehicle damage assessment involves a comprehensive analysis of car collisions and accident scenes based on automotive construction principles, using scientific, systematic, and professional inspection, testing, and surveying methods. It applies vehicle damage assessment data and repair records to scientifically and systematically estimate the cost of collision repairs. 2. Introduction 2: The damage assessment price provided by the insurance company reflects the overall loss of the vehicle. However, the final compensation depends on the driver's liability in the accident and the types of insurance coverage the vehicle has. If a separate damage assessment company is hired for reassessment, additional costs will be incurred. 3. Introduction 3: Generally, insurance companies require damage assessments to be completed at designated repair shops, but the final decision on which repair shop to use lies with the car owner.
17
4
Share

How long does 92 gasoline take to deteriorate in a car?

92 gasoline will deteriorate if stored in a car for more than three months. It is recommended to store gasoline in a sealed container to prevent deterioration and evaporation. Gasoline indicators: There are two key indicators for gasoline quality: actual gum and induction period, which reflect gasoline's stability. If gasoline is stored for too long, it will oxidize severely and form gum. Gum can cause valves to stick and fail to close properly. At high temperatures, it decomposes into carbon deposits that accumulate on cylinder walls, piston tops, and cylinder heads, leading to poor engine performance, knocking, and increased wear. Composition of gasoline: Gasoline appears as a transparent liquid, primarily composed of C4~C10 hydrocarbons. It is classified into three grades based on research octane number: 90, 93, and 95. With high octane ratings and excellent anti-knock properties, it is used in high-compression-ratio carburetor gasoline engines to enhance engine power and reduce fuel consumption. It also features good volatility and combustibility, ensuring smooth engine operation, complete combustion, and minimal carbon deposits.
4
2
Share

How Does a Parking Sensor Work?

The working principle of a parking sensor involves the use of ultrasonic signals. Controlled by the microcomputer inside the parking sensor host, the signals are transmitted and received by the probes. By comparing the time it takes for the signals to return, the distance to an obstacle is calculated, and then the alarm emits different warning sounds accordingly. A parking sensor consists of components such as ultrasonic sensors, a controller, and a display. It informs the driver about surrounding obstacles through sounds or more intuitive visual displays, alleviating the difficulties caused by the driver having to look around while parking, reversing, or starting the vehicle. It also helps eliminate blind spots and unclear vision, thereby enhancing driving safety. Precautions for using parking sensors: The display of the parking sensor is mounted on the rearview mirror, continuously reminding the driver of the distance to objects behind the vehicle. When reaching a dangerous distance, the buzzer starts beeping, with the frequency and urgency of the beeps indicating the proximity of the obstacle, prompting the driver to stop in time. When the gear lever is shifted into reverse, the parking sensor automatically activates, with a detection range of approximately 0.2 to 1.8 meters, making it highly practical for drivers during parking.
1
3
Share

Does Removing the Center Console Affect the Car?

Removing and reinstalling the car's center console generally has little to no impact on the vehicle's handling and overall performance. However, vehicles that have undergone center console removal and reinstallation are prone to issues such as abnormal noises, poor sealing, and increased noise due to improper assembly. Functions of the car's center console: Primarily, it serves to securely mount electrical instruments, protect the safety of occupants, and provide sound insulation and noise reduction inside the vehicle. Under normal circumstances, it is advisable to avoid removing or reinstalling the center console. The car's center console is the area that controls comfort and entertainment devices such as the air conditioning and audio system. It includes the central control door lock system, allowing the driver to control the opening and closing of all doors and the window lift system. Functions of the central control door lock system: Mainly includes central control, speed control, and individual control. The driver can control the locking and unlocking of all doors. Additionally, when the vehicle reaches a certain speed, the doors automatically lock. Each door also has an independent switch, allowing individual control. The car's center console also includes the central control panel, which houses various vehicle controllers such as the audio control panel.
19
5
Share

Can Converting Rear Drum Brakes to Disc Brakes Pass Annual Inspection?

Converting the rear drum brakes of a car to disc brakes can pass the annual inspection as long as it is registered with the vehicle management office and does not affect the braking performance. Generally, as long as the braking system functions properly during the inspection, the vehicle will pass. Annual inspections typically do not pose issues unless modifications involve changing the car's paint color, applying full-body decals, altering the body structure, or damaging the license plate. Definition of Front Disc and Rear Drum Brakes: Disc brakes, also known as hydraulic brakes or oil brakes, are a modern braking system. Drum brakes, on the other hand, are a traditional braking method where brake pads create friction against the drum to slow down the vehicle. Most vehicles on the market use disc brakes for the front wheels and drum brakes for the rear wheels, commonly referred to as the front disc and rear drum configuration. Differences Between Drum Brakes and Disc Brakes: The primary difference between drum brakes and disc brakes (also known as rotor brakes) lies in heat dissipation. During high-speed driving, drum brakes struggle with heat dissipation, leading to heat accumulation and potential thermal fade, which reduces braking efficiency. In contrast, disc brakes offer better ventilation and faster heat dissipation, making them less prone to thermal fade.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.