···
Log in / Register

Why does the Wuling Hongguang suddenly have high water temperature?

4 Answers
MacKingston
08/31/25 5:57am
Wuling Hongguang's high water temperature is due to the engine's cooling heat not being dissipated in time. More reasons for Wuling Hongguang's high water temperature are as follows: 1. Thermostat failure. 2. Water pump failure. 3. Radiator blockage. 4. High engine idle speed. 5. Slow or faulty cooling fan speed. More information about Wuling Hongguang is as follows: 1. Wuling Hongguang is the first self-developed crossover product between commercial vehicles and passenger vehicles launched by SAIC-GM-Wuling. This product features a smooth exterior design, diversified and practical spacious driving space. 2. Wuling Hongguang's perfect balance between power and economy, as well as its performance in handling and safety, has subverted people's traditional impression of commercial vehicles.
Was this review help?
5
0
Share
Gonçalves
09/13/25 2:24am
Last time I was driving my Wuling Hongguang, the temperature gauge suddenly shot up to red, which scared me into pulling over immediately. There are quite a few common reasons for such overheating issues: the coolant might be insufficient, possibly due to leaks in the radiator or hoses; or the fan might not be working—if the fan fails, it can get stuck, leading to poor heat dissipation, especially in hot weather. Another possibility is a faulty thermostat stuck in the closed position, preventing coolant circulation. Driving a Wuling minivan often involves heavy loads, which puts extra strain on the engine and makes it prone to overheating, so regular checks are essential. I once encountered this on the highway—I immediately stopped and turned off the engine, waiting for the cooling system to cool down. Never push through, or you risk severe engine damage from overheating. Later, at the repair shop, it turned out to be a clogged radiator, which was cleaned up at a low cost. Remember, safety comes first—if the temperature rises, stop and consult a professional.
Was this review help?
10
4
Share
Expand All
LucilleDella
10/27/25 3:12am
Overheating is a constant worry for Wuling Hongguang owners, and my old Hongguang had similar issues before. Common causes include insufficient coolant, with leaks often occurring at hose or radiator connections; a malfunctioning fan system, where a faulty motor or sensor prevents proper cooling; or a thermostat issue that can cause sudden temperature spikes. For a quick DIY check: pop the hood after parking and check the coolant level—top it up with water in an emergency if it's low; listen for the fan—if it's silent, the fuse might be blown. The engine's compact design means regular dust cleaning during maintenance is crucial to prevent blockages. I'm not much of a DIYer, so heading straight to the shop saves time and hassle—replacing the thermostat cost me just a few dozen bucks, and delaying repairs risks engine damage. While safety isn't a major concern in the city, keep a close eye on the temperature gauge during long trips.
Was this review help?
20
3
Share
Expand All
SanBrantley
12/10/25 3:26am
I drive a Wuling Hongguang to commute, and last time the water temperature soared, almost making me late to pick up my child from school. The reasons for high water temperature are nothing more than a few: insufficient coolant, a leaking or rapidly evaporating radiator—I always keep a bottle of water in my car to check; the fan not working, which fails to dissipate heat in hot weather; or a stuck thermostat, which is also common. When the issue occurred, I pulled over, turned on the hazard lights, waited for the temperature to drop slightly, and then drove a bit further to find a mechanic. This model has strong power but a simple cooling system, so I recommend checking the coolant and fan monthly and cleaning dust when washing the car. My wife reminded me that spending 200 yuan on a repair isn’t expensive.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a Tucson?

Method to reset the maintenance light on a Hyundai Tucson: 1. Set the ignition switch to the "Ignition/Operation/Start" mode. This means only the dashboard is turned on, without starting the engine. 2. On the dashboard display, use the driver information center control button on the right side of the steering wheel to access the maintenance menu interface. 3. When the remaining oil life is low, the message "Maintenance Required" will be displayed. 4. Press and hold the confirmation button on the steering wheel to reset the maintenance light. Maintenance light reset methods for other Hyundai models: 1. Turn on the car's power, and use the driver information center control button on the right side of the cabin to access the management menu interface on the dashboard display. 2. When the remaining oil life is low, the message "Maintenance Required" will be displayed. 3. Select the reset option to remove the maintenance light and complete the reset.
11
1
Share

How to Heat the Rearview Mirror on the Envision?

The rearview mirror heating button on the Envision shares the same button with the rear window defogger. Press it once to turn it on or off. The principle is actually very simple: an electric heating element (heating film) is installed inside the mirror lenses on both sides, which heats the rearview mirrors to evaporate moisture on the surface. Here is an introduction to rearview mirror heating: 1. The rearview mirror heating on the Envision is generally more practical in winter. In the morning during winter, you may notice frost on almost all the car's windows, which is difficult to wipe off with a towel. When the front windshield is frosted, you can turn on the heater after starting the car to blow warm air onto the glass to remove it. The frost on the rear windshield can be removed by turning on the rear window heating switch, which activates the heating wires inside the rear windshield. 2. During rainy or snowy weather, when the owner turns on the rearview mirror heating function, the heating element will quickly heat up to a fixed temperature within a few minutes, usually between 35-60 degrees Celsius, thereby heating the mirror and achieving the effect of defogging and defrosting.
14
1
Share

How to Replace the Key Battery for the 2018 ix35?

Hyundai ix35 Key Battery Replacement Tutorial: 1. Press the key button and pull out the mechanical key. 2. Insert the mechanical key halfway into the key slot and pry upward to open the cover. 3. After opening the key cover, you will see the position of the old battery. A flat-head screwdriver can be used to better remove the old battery. 4. Ensure the new battery is placed with the positive side facing up. 5. Reassemble the key in reverse order. 6. Test the key functions to ensure they work properly. Precautions for Battery Replacement: 1. Improper battery replacement may damage the car key. 2. Using unsuitable or non-compliant batteries may damage the car key. Only use new batteries with the same rated voltage, size, and specifications to replace the old ones. 3. If you are unsure how to replace the key battery, visit a 4S store for assistance. 4. To prevent reduced key sensitivity, avoid placing the key within 1 meter of magnetic sources for extended periods. 5. Dry your hands before disassembly, as moisture can cause the battery to rust.
5
2
Share

How to reset the tire pressure on Hongqi HS7?

Hongqi HS7 tire pressure reset method: 1. Turn on the central control screen, then click the vehicle information button in the lower left corner. 2. Click the wheel option, select the SET option, and then choose confirm. 3. Wait for the "Tire Pressure Monitoring Initialization" to complete, and the reset will be done. There are three commonly used tire pressure monitoring methods: Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): It combines the advantages of both systems mentioned above. Direct sensors are installed in two diagonally opposite tires, and a 4-wheel indirect system is also equipped. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data of the actual pressure in all four tires like a direct system.
1
4
Share

What is the correct starting method for the new BMW X1?

The correct starting method for the new BMW X1 is as follows: 1. Starting/Stopping the engine. Starting: First press the brake pedal, then press the ignition switch. Stopping: Bring the vehicle to a stop and press the one-touch start button. To ensure smooth engine starting, all electrical devices will be temporarily turned off during the starting process. 2. Turning the power on/off. To turn on only the power, follow these steps: Starting: Press the one-touch start button without pressing the brake pedal. Stopping: Press the button again to turn off the ignition switch. The needle in the tachometer will move to the OFF position. 3. Correct gear shifting sequence when turning off the engine. ① Stop the vehicle → ② Press the brake pedal → ③ Shift to N gear → ④ Release the brake → ⑤ Engage the handbrake → ⑥ Turn off the engine → ⑦ Shift to P gear (Note: When parking on a slope, steps ④ and ⑤ should be reversed; also, shifting to P gear before turning off the engine is also acceptable). The reason for engaging the handbrake before shifting to P gear is that if P gear is engaged first, the vehicle may still move slightly, causing the mechanical components of the transmission to lock more tightly and subjecting the metal parts to greater impact forces. 4. Emergency shutdown function. In special circumstances, the engine can also be turned off when the vehicle is moving above 7 km/h. Press the ignition switch twice in quick succession, or press and hold it once for a long time.
19
1
Share

What is the fuel consumption of the Zotye T700?

The 2018 Zotye T700 has one model equipped with a 177 horsepower engine, with an NEDC fuel consumption of 8.7L per 100 kilometers. Different models of the Zotye T700 have the same fuel tank capacity. The distance that can be covered with a full tank of fuel is as follows: The model equipped with a 177 horsepower engine and an NEDC fuel consumption of 8.7L per 100 kilometers has a fuel tank capacity of 64L. The distance that can be covered with a full tank of fuel is 64/8.7*100=736km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The car itself: Cars with larger displacement generally consume more fuel than those with smaller displacement because larger displacement usually means greater power, requiring more gasoline for combustion. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine computer controls higher RPMs to warm up the car, which also increases fuel consumption.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.