Why does the Wuling Hongguang shake intermittently?

1 Answers
DelAlexa
07/30/25 8:43am
The reasons for the intermittent shaking of the Wuling Hongguang are as follows: 1. Poor fuel quality; 2. Faulty idle speed adjustment; 3. Dirty throttle. Here is some relevant information about the Wuling Hongguang: 1. Body dimensions: The length, width, and height of the body are 4305mm, 1680mm, and 1750mm respectively, with a wheelbase of 2720mm. 2. Powertrain: The intake form is naturally aspirated, with a maximum horsepower of 86ps and a maximum torque of 108nm. The transmission is a 5-speed manual, with a top speed of 140km/h, a front-engine rear-wheel-drive layout, and hydraulic power steering.
Was this review help?
5
3
Share
More Forum Discussions

What is the emission standard of the Soueast Yiwu car?

The Soueast Yiwu car complies with the China VI emission standard. Emission standards in China include China I, China II, China III, China IV, China V, and China VI. Purpose of implementing the China VI emission standard: To prevent pollution from the exhaust of compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. China VI emission standard specifications: The China VI emission standard specifies a carbon monoxide emission limit of 700mg, non-methane hydrocarbon emission limit of 68mg, nitrogen oxide emission limit of 60mg, and particulate matter emission limit of 4.5mg. Methods to check a car's emission standard: Check the vehicle's environmental compliance label; estimate the emission standard based on the vehicle's manufacturing year; or use the original or a copy of the vehicle registration certificate to inquire at the local vehicle management office. The Soueast Yiwu is equipped with front MacPherson independent suspension and rear multi-link independent suspension, providing excellent vibration filtering. Even when passing over speed bumps, rear passengers experience minimal impact.
15
0
Share

What to Pay Attention to When Buying a Car for the First Time

When buying a car for the first time, pay attention to the details of the contract signing; check whether the vehicle is a flood-damaged car or has other issues; and ensure all car documents are complete. Details of contract signing: When signing the car purchase contract and other related documents, pay attention to every detail in the contract, especially the difference between "deposit" and "down payment," as a single word can determine whether the payment is refundable. Check whether the vehicle is a flood-damaged car or has other issues: After purchasing a car, it usually takes a few days before you can pick it up. The most important step during pickup is inspecting the vehicle. Consumers must refuse to accept flood-damaged cars or problematic vehicles, no matter how much the 4S store discounts them, and insist on a return. Ensure all car documents are complete: Make sure all necessary documents are available, including the purchase invoice, vehicle qualification certificate, vehicle conformity certificate, vehicle registration certificate, warranty certificate, and vehicle manual. If any documents are missing, request them from the 4S store immediately.
2
1
Share

What is the most suitable temperature for car air conditioning in winter?

In winter, it is best to keep the car air conditioning temperature between 18°C and 25°C. Generally, a temperature difference of within 10°C between the inside and outside of the car is advisable. If the temperature is too high, the large temperature difference between the inside and outside of the car can easily lead to catching a cold when getting out of the car. If the temperature is too low, it will affect driving comfort. In winter, it is generally recommended to alternate between the internal and external circulation modes of the car air conditioning. After starting the car, first turn on the external circulation to expel the cold air from the car, then switch to internal circulation to warm up the car. When alternating between the modes, it is best to decide based on road conditions. On open roads without odors or sandstorms, you can use the external circulation mode. If you are in heavy traffic, areas with severe exhaust emissions, or places with strong sandstorms, you can switch to the internal circulation mode. When using the heater in winter, the A/C switch should be turned off. The A/C switch in a car can be understood as the air conditioning cooling switch. When the A/C light is on, it means the air conditioning compressor is running, which increases engine load and fuel consumption. The heating principle of the heater utilizes the heat generated by the engine itself, which is delivered into the car through the air conditioning ducts without the need for the compressor. Therefore, turning on the A/C in winter does not increase the heating power but instead wastes the compressor's effort unnecessarily.
6
4
Share

What does 2055516 tire mean?

2055516 tire should refer to the tire model. The standard notation is 205/55R16. Here are the meanings of the numbers and letters: 1. 205 indicates the tire width is 205 millimeters. 2. 55 is the aspect ratio (tire sidewall height / tire width = 55%). The aspect ratio is a tire specification that refers to the percentage of the tire's section height to its section width. 3. R stands for radial tire. 4. 16 means it fits a wheel hub with a diameter of 16 inches.
18
4
Share

What Are the Effects of Low-Quality Gasoline on Cars?

Low-quality gasoline can cause fuel line blockages and lead to engine carbon deposits. Fuel line blockages: Low-quality gasoline often contains excessive impurities. During use, these impurities can spread throughout the entire fuel supply system. Components with porous structures or filtering functions, such as the fuel pump filter, fuel filter, and fuel injectors, are particularly susceptible to clogging by these impurities. After the fuel supply system becomes blocked, the most common consequences are poor fuel delivery, failure to start, sudden stalling while driving, or severe engine vibrations. Engine carbon deposits: Low-quality gasoline contains a high amount of gummy impurities. While some of these can be filtered out by the fuel line's filter screen, a significant portion remains unfiltered and adheres to internal parts like fuel lines and cylinders, forming what is known as carbon deposits. Additionally, substandard gasoline lacks cleaning properties and only increases the burden on the car's engine. If low-quality gasoline is accidentally used, it is advisable to completely drain the remaining fuel from the tank and refill with high-quality gasoline. At the same time, clean the throttle body, fuel injectors, and combustion chamber. Depending on the severity, replace spark plugs and ignition coils as needed.
10
5
Share

What Are the Harms of Underbody Armor to Cars?

Underbody armor can cause several harms to cars, including abnormal noises, reduced repairability of the chassis, increased fuel consumption, and decreased heat dissipation. Abnormal noises: Due to assembly errors and inaccurate positioning during installation, minor deformations in the car's structure while driving can cause the underbody armor to deform and rub against other car components, resulting in abnormal noises. Reduced repairability of the chassis: In cases of severe underbody damage requiring cutting and re-welding, the nearly 4mm-thick coating must be ground off, which also removes the factory paint layer. After welding, the paint layer must be reapplied, increasing the car's repair costs. Increased fuel consumption: Underbody armor adds weight to the car, leading to higher fuel consumption. Therefore, choosing the right type and material for the armor is crucial. Decreased heat dissipation: Both protective plates and liquid armor can reduce heat dissipation. After installing the armor, it is recommended to upgrade the car's original liquid cooling system.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.