Why does the Wuji 300RR make abnormal noises from the front?

1 Answers
OLily
07/30/25 10:47am
Abnormal noises from the front of the Wuji 300RR may be due to engine issues. Below is a detailed introduction about the Longxin Wuji 300R motorcycle: 1. Overview: The Longxin Wuji 300r is a compact street bike, featuring a flat shield-style front head, inheriting the mainstream style of sporty street bikes. The exposed red trellis frame makes the bike appear more streamlined. 2. Others: The LED plus lens layered front headlight provides a sense of safety during night rides. The 15-liter large fuel tank offers a decent range, and the addition of wing-shaped guards makes the tank look more rugged. The short exhaust has an extra small section covered with a silver heat shield. The entire engine features a fully aluminum-ceramic-plated nickel cylinder body, dual overhead camshafts, water-cooled balance shaft, four-valve international six-speed characteristics, all contributing to excellent performance.
Was this review help?
13
0
Share
More Forum Discussions

How to Use the Cruise Control on the 10th Generation Accord?

The method to use the cruise control on the 10th Generation Accord: Turn on the cruise control switch CRUISE, and the cruise control indicator light on the dashboard will illuminate. Drive to your desired speed, then press the SET button to set the current speed. Once set, you can remove your right foot from the accelerator. To adjust the speed, press RES to increase speed or SET to decrease speed. To deactivate the cruise control, you can press the brake, press the CANCEL button, or toggle the ON/OFF switch. To resume the previously set speed after deactivation, press the RES button. The dimensions of the 10th Generation Accord are 4893mm in length, 1862mm in width, 1449mm in height, with a wheelbase of 2830mm.
18
4
Share

How to adjust the time on Chery QQ3?

Method to adjust the time on Chery QQ3: 1. First, start the vehicle and press the time adjustment button on the right side of the instrument panel; 2. Hold down the time adjustment button, and the hour digits of the vehicle's time will start blinking. Then, briefly press the time button to adjust the hour digits; 3. After accurately adjusting the hour digits, release the time adjustment button. After a few seconds, the minute digits of the vehicle's time will start blinking; 4. Briefly press the time adjustment button again to accurately adjust the minute digits. The Chery QQ3 has a body size of 3550mm in length, 1495mm in width, 1485mm in height, and a wheelbase of 2340mm.
5
0
Share

Is a Tiptronic Transmission an AT?

A Tiptronic transmission is not an AT. Tiptronic refers to an automatic transmission that has a manual shifting function, but this transmission with manual shifting capability is not necessarily an AT transmission. It could also be a dual-clutch transmission or a CVT. Transmission mainly refers to a car's gearbox, which is divided into manual and automatic types. A manual transmission primarily consists of gears and shafts, achieving speed and torque variation through different gear combinations. On the other hand, an automatic transmission (AT) is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system, achieving speed and torque variation through hydraulic power transmission and gear combinations.
10
4
Share

What Causes the Brake Pedal to Feel Hard?

When the brake pedal feels hard while driving, it is actually the ABS system functioning, and there is no need for excessive concern. Below is an introduction to ABS-related knowledge: 1. Function: ABS stands for Anti-lock Braking System. It ensures that the wheels maintain rolling friction with the ground even when the brakes are fully applied, preventing wheel lock-up and loss of control. 2. Drawback: On gravel roads or roads with thick snow, vehicles without ABS can push gravel or snow in front of the tires during braking, which helps to stop the wheels from moving forward.
6
1
Share

How to Drive a Dual-Clutch Transmission Car?

When driving a dual-clutch transmission car, you should apply the throttle gently and start smoothly, avoiding launch starts. Always shift to N gear when parking and frequently use the manual mode. Below is an introduction to dual-clutch transmission cars: 1. Working principle of dual-clutch transmission: One clutch corresponds to odd-numbered gears, while the other corresponds to even-numbered gears. 2. Dry dual-clutch: Developed based on the 6-speed DQ250 wet dual-clutch technology, it simplifies the related hydraulic system. 3. Wet dual-clutch: The wet dual-clutch consists of two sets of multi-plate clutches, one large and one small, installed coaxially. The clutch plates are housed in a sealed oil chamber filled with hydraulic fluid, giving the wet clutch structure better adjustment capabilities and excellent thermal properties, allowing it to transmit higher torque.
20
5
Share

Which seat in the car is suitable for pregnant women?

Pregnant women should sit in the right rear seat of the car, which is relatively safer. Here are some relevant tips for pregnant women when traveling by car: 1. Avoid pressure on the abdomen: Be careful not to put pressure on the abdomen while sitting in the car. 2. Avoid prolonged sitting: Prolonged sitting can be very uncomfortable for pregnant women, so it's advisable to take short walks and breathe fresh air during long trips. 3. Avoid noise: The outside environment is less comfortable and safe than at home due to heavy traffic and noise. Therefore, special attention should be paid to horn sounds to soothe the baby. 4. Avoid crowds: When taking buses or subways, be extra cautious. Do not rush when boarding and remember that you are a pregnant woman.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.