Why does the wrench light flash and the Great Wall M4 fail to start?

How to Remove External Oil Sludge from the Engine?

Methods for removing external oil sludge from the engine: 1. Heat the engine to release the oil from the oil pan, wait until the oil drains completely, then reinstall the plug; 2. Add an equal amount of light diesel fuel to the crankcase as the engine oil, and after turning off the engine for 5 minutes, start the engine to run idle; 3. Drain the oil from the oil pan, add new engine oil, drive for 20 kilometers, and then change the oil again. The principle of the engine is: 1. Mix air and gasoline in a certain proportion to form a combustible mixture; 2. The intake stroke draws the mixture into the cylinder, where it is compressed, ignited, and burned to generate thermal energy; 3. The high-temperature and high-pressure gas acts on the top of the piston, pushing the piston to perform reciprocating linear motion, and the mechanical energy is output externally through the connecting rod, crankshaft, and flywheel mechanism. Engine maintenance methods include: 1. Use qualified engine oil; 2. Use qualified coolant; 3. Regularly clean the scale in the radiator; 4. Regularly remove carbon deposits from the engine; 5. Replace the vehicle's air filter, oil filter, and fuel filter on time; 6. Check the condition of the spark plugs; 7. Maintain normal engine speed.

6

2

Share

What causes the squeaking noise from the left front wheel that stops when braking?

The reasons why the left front wheel squeaks but stops when braking are: 1. Corrosion of the brake disc or brake pads; 2. The brake pads are new; 3. Excessive wear of the brake disc and brake pads; 4. The brake pads are installed backwards or of the wrong model; 5. Use of inferior or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Presence of foreign objects between the brake drum or disc and the shoes. Methods for maintaining car brakes include: 1. High-temperature protection to prevent corrosion of the brake system; 2. Cleaning oil stains from the brake disc, drum, and pads to ensure good heat dissipation of the brake disc; 3. Regular replacement of brake fluid; 4. Regular inspection of the thickness of brake pads or shoes. Causes of brake failure include: 1. Impurities or poor sealing in the brake master cylinder; 2. Failure of the vacuum booster pump; 3. Dirty brake fluid; 4. Leakage in the brake master cylinder or caliper; 5. Air leakage from the air reservoir or pipeline connections; 6. Severe overloading; 7. Carbonization of the brake drum; 8. Lack of brake fluid in the brake master cylinder; 9. Wear of the brake master cylinder piston.

6

1

Share

What is the fuel consumption per 100 km for the Volkswagen T-Roc 1.4T?

The fuel consumption per 100 km for the Volkswagen T-Roc 1.4T ranges from 5.9L to 7.0L. Currently, there are five models available for sale. Among them, the T-Roc 2021 two-wheel-drive Elite Smart Connected Edition has a fuel consumption of 7L per 100 km, while the two-wheel-drive Comfort Smart Connected Edition, two-wheel-drive R-Line-Pro Smart Connected Edition, two-wheel-drive Luxury Smart Connected Edition, and four-wheel-drive Luxury Smart Connected Edition all have a fuel consumption of 5.9L per 100 km. The above figures are based on the NEDC combined fuel consumption, which measures the fuel consumption under the NEDC test cycle. The actual fuel consumption is higher than these values, ranging from 7.35L to 7.89L per 100 km. Among comparable models, the Tharu 2021 has a combined fuel consumption of 5.9L per 100 km, the Qashqai 2022 has a combined fuel consumption of 6.2L per 100 km, and the Tang 2021 has a combined fuel consumption of 9L per 100 km. The fuel consumption of a vehicle is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind direction, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically produce more power, requiring more gasoline to burn and perform work. Heavier vehicles also consume more fuel due to the need for greater driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind direction: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperature: When the engine block is cold, the injected gasoline is less likely to atomize, requiring more gasoline to be injected for combustion, thus increasing fuel consumption. Additionally, at lower temperatures, the engine control unit may operate at higher RPMs to warm up the engine, further increasing fuel consumption.

10

0

Share

What is the difference between an SUV and a sedan?

SUV vs. sedan differences: 1. Visibility: Due to its higher ground clearance and open design, an SUV offers a better field of vision; sedans have relatively lower ground clearance, resulting in a narrower field of vision compared to SUVs. 2. Comfort: SUVs generally provide less comfort, while sedans offer better comfort. An SUV (Sports Utility Vehicle) is designed for both off-road capabilities and urban driving, featuring strong power, off-road performance, spaciousness, and excellent cargo and passenger capacity. A sedan is a loosely defined term referring to smaller cars with roofs or convertibles.

2

1

Share

Why is it necessary to change engine oil frequently?

Frequent oil changes are necessary because: If the oil is not changed for a long time, its sealing, lubrication, and cooling functions will be greatly reduced. The impurities in the oil can wear internal components, thereby affecting the engine's lifespan and making the engine more prone to malfunctions. During normal engine operation, the oil forms a thin film on the surfaces of various engine components. This oil film prevents direct contact and friction between the engine parts. Engine oil, or lubricating oil, plays crucial roles in the engine, including lubrication, cleaning, cooling, sealing, reducing wear, dampening vibrations, and preventing rust and corrosion.

10

2

Share

Where Are the Brake and Clutch Located?

The brake is on the right side of the clutch, while the clutch is positioned on the far left, closest to the driver's side door. When driving, it's important not to keep your left foot resting on the clutch pedal, as this can prevent the clutch disc from fully engaging, leading to excessive wear. The clutch is situated between the engine and the transmission, with the clutch pressure plate mounted on the engine's flywheel. Pressing the clutch pedal disengages the clutch, while releasing it engages the clutch. The clutch disc features internal splines that secure a driveshaft, which serves as the transmission's input shaft.

18

2

Share

Why does the wrench light flash and the Great Wall M4 fail to start?

How to Remove External Oil Sludge from the Engine?

What causes the squeaking noise from the left front wheel that stops when braking?

What is the fuel consumption per 100 km for the Volkswagen T-Roc 1.4T?

What is the difference between an SUV and a sedan?

Why is it necessary to change engine oil frequently?

Where Are the Brake and Clutch Located?

What Causes a Loose Steering Wheel?

What is the charging method for a motorcycle charger?

What causes the vibration of the Lynk & Co 03 three-cylinder engine in the later stage?

What are the reasons why a diesel engine cannot accelerate when stepping on the throttle?