Why does the Volkswagen Santana always pop out of reverse gear?

1 Answers
LaCollin
07/29/25 5:49pm
The Volkswagen Santana always pops out of reverse gear because the reverse gear locking mechanism inside the transmission is faulty and cannot effectively lock the reverse gear. Meaning of reverse gear: The reverse gear position for automatic transmission vehicles is: R gear. Automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, S, L. Driving an automatic car only requires the use of the parking gear P, reverse gear R, neutral gear N, and drive gear D to fully meet the needs of general driving. However, in some special driving environments, other functional gears may be needed. Gear shifting technical requirements: Master the appropriate timing for gear shifting, meaning neither shifting up too early nor shifting down too late; the coordination between the clutch pedal, accelerator pedal, and gear lever must be correct and harmonious, with precise positioning; after shifting into a new gear, release the clutch pedal smoothly and promptly.
Was this review help?
14
0
Share
More Forum Discussions

What is the best oil model for Camry?

Camry's oil model is 5W-30. If the total mileage exceeds 100,000 kilometers, it is recommended to use 5W-40 oil. The viscosity of the oil will change with temperature, so special attention should be paid to its performance under low and high-temperature conditions. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the car. The latter number represents the oil's kinematic viscosity at 100°C. The higher the number, the better it maintains viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing Camry's oil is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a specialized wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the engine valve cover's oil filler port, usually filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for leaks at the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check if the engine oil level is within the standard range.
14
0
Share

Does the Toyota RAV4 have a particulate filter?

Toyota RAV4 does not come with a particulate filter across all its models. There are 10 variants of the Toyota RAV4, none of which include a particulate filter, yet they still comply with the China VI emission standards. A particulate filter is a ceramic filter installed in the exhaust system of diesel engines, designed to capture particulate emissions before they are released into the atmosphere. It can reduce soot produced by diesel engines by more than 90%, with the captured particulate matter being burned off during vehicle operation. How the particulate filter works: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipe. Inside, a densely arranged bag-type filter traps the carbon particles on a metal fiber felt filter. Once the accumulated particles reach a certain level, a burner at the end automatically ignites, burning off the carbon particles and converting them into harmless carbon dioxide that is then expelled. To check if a Toyota RAV4 is equipped with a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, carefully review the fault codes in the manual to see if there is a 'particulate filter' warning light indicator. Look at the label on the oil filler cap. If the cap clearly states 0W-20 grade oil, it indicates the presence of a particulate filter. Inspect the exhaust pipe behind the three-way catalytic converter for an additional cylindrical section. If present, that is the particulate filter.
17
1
Share

How Long Does It Usually Take for Imported Vehicles to Clear Customs?

Generally, customs clearance can be completed within one day. However, if the goods are subject to inspection, the actual time required will depend on the inspection process. Before customs declaration, the containers are placed at the customs-supervised port terminal. Typically, customs declaration can only be initiated after the goods arrive at the port, and shipping can only proceed after customs clearance is granted. The entire customs declaration process consists of three stages: declaration, inspection, and release. The deadline for export goods declaration is 24 hours before loading. For goods not requiring taxation or inspection, customs clearance procedures are completed within one day from the acceptance of the declaration. Below is the detailed process: 1. Declaration: The declaration deadline refers to the legal time limit for the shipper or their agent to declare goods to customs after the goods arrive at the port. The deadline for export goods declaration is 24 hours before loading. For goods not requiring taxation or inspection, customs clearance procedures are completed within one day from the acceptance of the declaration. 2. Inspection: For goods requiring inspection, an inspection notice is issued within one day from the acceptance of the declaration, and the inspection is completed within one day from when the conditions for customs inspection are met. Except for cases requiring tax payment, customs clearance procedures are completed within 4 hours after the inspection is finished. According to the relevant provisions of the "Customs Law," import and export goods are generally subject to tariffs unless otherwise stipulated by the state. Tariffs are levied by customs in accordance with the Customs Import and Export Tariff. For goods requiring taxation, a tax bill is issued within one day from the acceptance of the declaration, and customs clearance procedures are completed within 2 hours after the tax payment is verified. 3. Release: For general export goods, after the shipper or their agent truthfully declares to customs and pays all applicable taxes and fees, customs stamps the "Customs Release" seal on the export shipping order. The shipper of the export goods can then proceed with loading and shipping the goods overseas.
9
5
Share

What are the differences between China V and China VI vehicle emission standards?

The distinction between China V and China VI vehicle emission standards can be identified by the letters on the rear of the vehicle. China V is denoted by 'V', while China VI is denoted by 'VI'. The differences between the two are as follows: Different emission standards: China VI's emission standards are more than 30% stricter than China V. Excluding the influence of driving conditions and testing, gasoline vehicles under China VI must reduce carbon monoxide emissions by 50%, total hydrocarbons and non-methane hydrocarbons by 50%, and nitrogen oxide emissions by 42%. Different implementation times: The China V standard was implemented nationwide on January 1, 2017, as the fifth phase of national motor vehicle emission standards. The China VI standard has been in effect since July 1, 2019. Different principles: Under China V, diesel and gasoline vehicles had different emission standards, but China VI adopts a fuel-neutral principle, meaning the emission limits are the same regardless of the fuel type. Different issuing authorities: The China V standard was issued by the Ministry of Environmental Protection, while the China VI standard was jointly issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China V is represented by 'V', while China VI is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles (PHEVs): Compared to China V, China VI has enhanced monitoring requirements for PHEVs, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulatory aspects. China V emission limits are as follows: Gasoline vehicles must not emit more than 1,000 milligrams of carbon monoxide per kilometer driven. They must not emit more than 68 milligrams of non-methane hydrocarbons, 60 milligrams of nitrogen oxides, or 4.5 milligrams of PM (particulate matter) per kilometer driven. China VI has two sub-standards: China VIa and China VIb, with the following limits: China VIa limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. They must not emit more than 68 milligrams of non-methane hydrocarbons, 60 milligrams of nitrogen oxides, or 4.5 milligrams of PM per kilometer driven. China VIb limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. They must not emit more than 35 milligrams of non-methane hydrocarbons, 35 milligrams of nitrogen oxides, or 3 milligrams of PM per kilometer driven. Affected by the China VI emission policy, although China V vehicles can still be used normally without travel restrictions, their resale value is significantly impacted. For truck owners, if they purchase a truck on loan for freight transport, the depreciation of the vehicle after repaying the loan equates to their net profit during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China VI vehicles, with their longer service life and greater road rights, offer more advantages.
12
1
Share

Which car brand has a lion head logo?

The lion head logo belongs to Jaguar Cars. This emblem was adopted by Jaguar in 1935 and is currently used only on a limited number of classic and collectible models. Here is relevant information about Jaguar: 1. Jaguar is a British automotive brand, serving as a top-tier luxury marque for the British royal family. Founded in 1935 by Sir William Lyons, it is currently owned by India's Tata Group. 2. Jaguar entered the Chinese market in 2004 and currently sells three product lines in China: TYPE series sports cars, X series sports sedans, and PACE series coupe SUVs.
3
4
Share

What brand are the tires on the Fista?

The Fista uses Nexen brand tires, with front and rear tire specifications of 225/45R17. Below is more information about the Fista: 1. The Fista model comes in two versions, National V and National VI, with front-wheel drive. 2. The Fista measures 4660mm in length, 1790mm in width, and 1425mm in height, with a wheelbase of 2700mm. 3. The Fista is equipped with 1.4T and 1.6T engines, paired with a 7-speed dual-clutch transmission. 4. The Fista comes standard with safety and assistive devices.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.