Why does the Volkswagen's fan keep running after parking?

What is the function of the high-mounted stop lamp in a car?

The high-mounted stop lamp serves to alert the vehicles behind, thereby helping to prevent traffic accidents. Here is an introduction to the high-mounted stop lamp: 1. The high-mounted stop lamp refers to a brake light positioned higher, usually above the rear window, allowing the following vehicle to better see the braking action of the car ahead and react appropriately. 2. Nowadays, many cars come with a high-mounted stop lamp as standard equipment, while some do not. In such cases, you can install one yourself to enhance the vehicle's active safety and reduce the likelihood of accidents. 3. The high-mounted stop lamp is generally installed on the upper part of the rear of the car, making it easier for vehicles behind to notice when the car ahead is braking, thereby helping to prevent rear-end collisions. 4. Typically, cars have two brake lights installed at the two ends of the rear, one on the left and one on the right. Therefore, the high-mounted stop lamp is also called the third brake light, high-mounted brake light, or third stop lamp.

2

5

Share

What is the fuel consumption of the new Honda Lingpai?

The new Honda Lingpai has a combined fuel consumption of 5.5 liters and 4.9 liters per 100 kilometers. Below are the specific details: 1. The powertrain of the new Lingpai. The Lingpai is equipped with a 1.0T turbocharged engine (model P10A3) with a rated power of 90 kW. The transmission system includes a manual and a CVT gearbox, with combined fuel consumption of 5.5 liters and 4.9 liters per 100 kilometers respectively. 2. The design of the new Lingpai. The all-new Lingpai features a fresh design with a single chrome strip running across the front, integrating the upper and lower grille into an inverted trapezoidal shape, exuding a stylish and sporty vibe. The headlights on both sides are more angular and sharp, with LED daytime running lights connected to the chrome strip, enhancing its refined look. The taillights on both sides adopt a new design, offering better visibility at night. The rear bumper is designed to be simple, with a single exhaust pipe on the right side.

20

4

Share

Can ETC be uninstalled after installation?

ETC can be uninstalled after installation. However, removing the ETC device by yourself will render it invalid because the ETC device has an anti-tamper function. There is a small switch on the back of the ETC electronic tag, which automatically turns off once the device is detached from the windshield. Therefore, you must take the vehicle's registration certificate to the ETC service provider for reactivation. ETC Billing Principle: Highways have one or more ETC lanes. The onboard electronic tag installed on the vehicle's windshield communicates with the microwave antenna in the ETC lane via dedicated short-range microwave communication. Using computer networking technology, the system performs backend settlement with banks, allowing vehicles to pass through toll stations without stopping to pay road and bridge fees. All of this operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Promotes low-carbon travel by reducing noise and exhaust emissions since vehicles do not need to stop at toll stations; Reduced wear and tear: Saves costs by minimizing frequent starts and brakes, thereby lowering vehicle wear and fuel consumption; Improved efficiency: Theoretically, ETC lanes can increase traffic throughput by 2-3 times, making traditional ETC systems more advanced, faster, and high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More Policy Support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation cards should be widely interoperable in key urban clusters, and the proportion of vehicles equipped with ETC should significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for passenger vehicles should reach 50%." More Future Possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will promote ETC adoption for trucks and explore deeper integration of ETC systems with smart transportation developments such as vehicle-to-vehicle communication and vehicle-to-infrastructure coordination. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC usage.

18

4

Share

What measures should a driver take when the service brake suddenly fails?

Here are the measures a driver should take when the service brake suddenly fails: 1. Steady the steering wheel and maintain control of the direction: When a motor vehicle experiences brake failure while driving, the first thing to do is to firmly hold the steering wheel and maintain control to prevent the vehicle from deviating due to panic, which could ultimately lead to a traffic accident. 2. Shift to a lower gear for deceleration: For manual transmission vehicles, when encountering brake issues, the driver can press the clutch and shift to a lower gear to decelerate, even dropping two gears at once if necessary; for automatic transmission vehicles with a manual mode, the driver can also shift to a lower gear for deceleration. 3. Use the parking brake to slow down: The parking brake, commonly known as the handbrake, is not part of the same braking system as the brake pedal. Therefore, when the vehicle's brakes fail, the parking brake can still be used for effective braking. For mechanical handbrakes, simply pull up the handbrake lever; for electronic handbrakes, hold down the button.

16

5

Share

What does the Buick Excelle 48v mild hybrid system mean?

Buick Excelle 48v mild hybrid system can be understood as a 48v mild hybrid. The 48v mild hybrid is an upgrade from the traditional 12v electrical system, solving issues such as high starting fuel consumption and low-speed vibration. However, the 48v mild hybrid is not a true hybrid in the practical sense, as the term 'mild' indicates it is merely a solution to reduce emissions and cannot achieve the fuel economy of a full hybrid. Currently, mild hybrid models on the market can be divided into two types: 'ISG motor' and 'BSG motor.' Among them, the ISG motor has relatively weaker functionality, mainly assisting with engine start-stop, while the BSG motor is more practical. The Buick New Excelle is equipped with a 48V mild hybrid system featuring a BSG motor. This system connects the engine and the motor transmission in parallel. When necessary, the 48V motor can provide sufficient torque to the engine, increasing the vehicle's power by 10KW and torque by 5-20NM during acceleration. During deceleration, it can convert the vehicle's kinetic energy into chemical energy to generate electricity for the motor.

5

1

Share

Can You Suffocate from Sleeping in a Car with the Air Conditioning On?

Yes. Here are the relevant details: 1. Risk of Carbon Monoxide Poisoning: When a car is stationary, the exhaust fumes do not disperse as they would while driving and can be drawn into the car by the air conditioning system, leading to carbon monoxide poisoning. 2. Risk of Oxygen Deprivation: A car in a prolonged enclosed state will gradually deplete oxygen levels inside, making sleeping in the car potentially fatal due to suffocation. Therefore, sleeping in a car with the air conditioning on is unsafe. 3. Precautions for Brief Naps: 1. Park in an Open Area: Choose a spacious location to park, preferably with the front of the car facing the wind direction. Even if the engine is left running, the exhaust will be blown away. Parking in confined spaces like underground garages can allow exhaust fumes to seep into the car. 2. Crack the Windows: When sleeping with the air conditioning on, leave a 2-3 cm gap in the windows to prevent suffocation or carbon monoxide poisoning. However, avoid leaving too large a gap to deter potential intruders. 3. Use External Air Circulation: It is advisable to activate the air conditioning's external circulation mode while sleeping in the car. This mode draws in outside air, maintaining airflow inside the vehicle.

8

4

Share

Why does the Volkswagen's fan keep running after parking?

What is the function of the high-mounted stop lamp in a car?

What is the fuel consumption of the new Honda Lingpai?

Can ETC be uninstalled after installation?

What measures should a driver take when the service brake suddenly fails?

What does the Buick Excelle 48v mild hybrid system mean?

Can You Suffocate from Sleeping in a Car with the Air Conditioning On?

Does Brilliance's Bankruptcy Have Any Impact on Brilliance BMW Users?

What are the differences between Verna and Accent?

What is the Audi A6L 48V Mild Hybrid?

Is It Really Not Advisable to Buy a Flood-Damaged Car?