Why does the Volkswagen CC's anti-theft system activate and prevent the engine from starting?

1 Answers
ZaneFitz
07/25/25 6:28am
This is because the car's anti-theft safety lock has not been deactivated. Below is some information about the car safety lock: 1. Introduction: A car safety lock is a type of vehicle security device used to lock the steering wheel, consisting of a lock rod, lock body, and lock handle. 2. Principle: Bent rods are welded onto the lock rod and lock handle, and the right end of the lock body is threaded to connect with the lock handle. When in use, the bent rods clamp onto the inner side of the steering wheel, aligning the lock handle with the seat, thereby preventing unauthorized drivers from operating the steering wheel and thus deterring vehicle theft. The safety lock features a simple structure, ease of use, high reliability, and strong anti-theft capabilities, making it an ideal security device for vehicle protection.
Was this review help?
19
5
Share
More Forum Discussions

What are the tire specifications for the Focus?

The tire specifications for the Focus are as follows: 1.6L model - 205/60-R16; 2.0L model - 215/50-R17. Below is relevant information about tires: 1. The international standard tire code represents the section height and aspect ratio as a percentage in millimeters, followed by the tire type code, rim diameter (in inches), load index (permissible load capacity code), and permissible speed code. 2. Tires are one of the crucial components of a vehicle, directly contacting the road surface and working with the suspension system to absorb shocks during driving. They ensure good ride comfort and smooth operation, maintain excellent traction between wheels and road surfaces, improve vehicle traction, braking, and off-road capability, and bear the vehicle's weight.
19
2
Share

What to Do When the ABS Light Comes On?

Solutions for when the ABS light comes on: 1. Carefully inspect the wiring and connectors to check for poor contact or damage; 2. Examine the installation gap and position of the wheel speed sensor and tone ring, as well as any contamination by dust or debris; 3. Check if the wheel bearing clearance is too large and adjust it to the normal value; 4. Avoid high-speed driving and sudden braking, and take the vehicle to a 4S shop for inspection as soon as possible. Reasons for the ABS light coming on include: 1. No speed signal is transmitted to the ABS control unit when the vehicle speed exceeds 10 km/h; 2. The speed signal exceeds the tolerance value when the vehicle speed is greater than 40 km/h; 3. There is a recognizable open circuit or short circuit to the positive or ground in the sensor.
17
0
Share

How to Use the Cruise Control on the Hyundai Elantra?

To use the cruise control on the Hyundai Elantra, follow these steps: Press the CRUISE button on the steering wheel to activate the cruise control system, and the cruise control indicator will light up. Accelerate to your desired speed, which must be greater than 30 km/h. Below are some precautions when using the cruise control system on the Hyundai Elantra: 1. In principle, cruise control should be used on highways or fully enclosed roads. This is because, on non-enclosed roads, complex road conditions can compromise traffic safety. 2. It should be disabled on winding mountain roads or roads with too many curves. Under normal circumstances when navigating curves, it is necessary to appropriately apply throttle to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the throttle controlled by the onboard computer, which can often pose a danger when driving on curves. Under such conditions, it is advisable to control the speed appropriately.
10
1
Share

What kind of engine oil does the Lavida need?

The Lavida uses 5w30 or 0w30 engine oil, with 0w30 offering better low-temperature protection. Here is some extended information about the Lavida: 1. The Lavida is a compact A-segment sedan under the Volkswagen brand, equipped with three engine options: a 1.2L turbocharged engine, a 1.4L turbocharged engine, and a 1.5L naturally aspirated engine. 2. The 1.2L turbocharged engine delivers 116 horsepower and a maximum torque of 200 Nm, achieving peak power at 5,000 rpm and maximum torque between 2,000 to 3,500 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block.
19
4
Share

Is the BMW X1 compliant with China National V or China National VI emission standards?

BMW X1 meets the China National VI emission standard. Below are the relevant details: 1. After being lengthened, the 4565mm side profile of the BMW X1 appears particularly elongated, complemented by an ultra-long wheelbase of 2780mm. As for the rear design, the BMW X1 retains a very familiar appearance—without looking at the badge, many might find it hard to distinguish between the X1 and X3, which is precisely what consumers appreciate most. 2. The interior exudes a strong BMW character, with a distinct sporty style that makes it easy for those familiar with BMW to adapt. Additionally, the overall height of the dashboard is relatively low, creating a more spacious feel. 3. In terms of features, the BMW X1 doesn't offer many surprises. Even advanced driver assistance functions (including lane departure warning, front collision warning, city collision warning, and pedestrian collision protection) are only available in the top trim, while other features are quite standard.
8
5
Share

What does the key icon in the car mean?

When the key icon appears on the car dashboard, it may indicate one of three situations: first, the remote key battery is low; second, the smart key is not within the sensing range; third, there is an issue with the car's smart sensing system. It is recommended that car owners use the process of elimination to identify the cause and address it promptly to avoid affecting vehicle usage. Below are some relevant tips for car key maintenance: 1. During the use of the car, it is important to protect the remote key. Do not expose the key to environments below 0°C or above 50°C, as this will significantly reduce the battery's lifespan. 2. Keep the key in a dry environment, as humidity can decrease battery life. Avoid placing the key with hard objects to prevent scratching the chrome plating on the key. 3. Do not place the key near high-power appliances such as TVs, microwaves, washing machines, or computers, as this may cause the key to malfunction.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.