Why does the vehicle still show overdue after inspection?

1 Answers
DelEli
07/29/25 4:01pm
It takes 1 to 3 working days to be displayed. After the vehicle undergoes annual inspection, there is a waiting period for the specific upload and archiving time. The status won't be updated immediately upon completion of the inspection, so there's no need to worry. If it hasn't been updated after 7 days, you can consult the vehicle management office. More extended information is as follows: 1. Annual inspection for non-operational small and micro vehicles: In the second and fourth years after vehicle registration, they are exempt from on-site inspection and only need to collect the annual inspection sticker. In the sixth, eighth, and tenth years, on-site inspection is required. Between the tenth and fifteenth years, annual on-site inspection is necessary. After 15 years, on-site inspection is required every six months. 2. Vehicles not undergoing annual inspection will be forcibly scrapped: If a motor vehicle fails to complete annual inspection procedures for three consecutive inspection cycles, it will be forcibly scrapped. The calculation isn't based on years; the three inspection cycles are six years, three years, and one and a half years respectively. It's crucial to pay attention to the motor vehicle's inspection cycle to avoid affecting normal vehicle use.
Was this review help?
13
0
Share
More Forum Discussions

How to Use the Automatic Parking Feature on the BMW 530?

BMW 530 automatic parking operation method: First, press the P button next to the gear lever, where P stands for 'Park', the English term for parking; then drive the car near the parking space, and the car screen will display the parking space search status. After receiving the parking space prompt on the screen, manually turn on the right turn signal, then hold down the P button and release the foot brake to start automatic parking. The BMW 530 is a vehicle launched by BMW Brilliance Automotive Ltd., featuring a straight-6 gasoline engine, four-valve technology, double overhead camshaft variable valve timing control system, and digital electronic engine management system technology.
20
2
Share

Where is the car air conditioning blower located?

Car air conditioning blower is located behind the glove compartment in front of the passenger seat or at the lower right corner of the dashboard. Remove the glove compartment and then take off the cover plate to see it. The function of the car blower is to blow the cold air from the air conditioning evaporator or the hot air from the heater core into the car. The blower operates by the eccentric rotation of the rotor in the cylinder, changing the volume between the vanes in the rotor slots to suck in, compress, and discharge air. During operation, it uses the pressure difference to automatically deliver lubrication to the oil drip nozzle, which drips into the cylinder to reduce friction and noise, while preventing gas backflow in the cylinder. This type of blower is also called a sliding vane blower.
5
3
Share

Is the BMW 525 Front-Wheel Drive or Rear-Wheel Drive?

The BMW 525 is a rear-wheel drive vehicle. Except for some MINI models that use front-wheel drive, most other BMW models are either rear-wheel drive or all-wheel drive. The advantages of rear-wheel drive cars include: 1. Faster acceleration; 2. More stable driving; 3. Better handling; 4. The steering wheels are non-driven, making the steering mechanism simpler and easier to repair. In terms of power, the BMW 525 is equipped with a low-power version of a 2.0T inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm. For suspension, the BMW 525 features a double-wishbone independent front suspension and a multi-link independent rear suspension.
3
1
Share

Is the Volkswagen Tharu's Transmission Wet-Type?

The Volkswagen Tharu's 2.0T model is equipped with a wet-type transmission, while the 1.4T model features a dry-type transmission. Both dry and wet dual-clutch transmissions operate on a similar principle, with two clutches working alternately. The key difference lies in the working environment of the clutch plates. In dry-type transmissions, the clutch plates directly contact the engine flywheel, whereas in wet-type transmissions, the clutch plates operate within the transmission fluid. The Volkswagen Tharu is a compact SUV under the Volkswagen brand, with dimensions of 4453mm in length, 1841mm in width, and 1632mm in height, and a wheelbase of 2680mm. In terms of exterior design, the Tharu adopts a rock-cut design philosophy, with pronounced ridges on the hood enhancing a sense of strength. The wide-body dual U-shaped full LED headlights tilt upwards, and the grille bars extend to the headlights.
13
1
Share

Does the Audi Q5L burn engine oil?

Audi Q5L equipped engine does not have the phenomenon of burning engine oil. The new generation Q5L uses Volkswagen's classic EA888 engine. The phenomenon of burning engine oil mainly occurred in the first generation of this engine, which has now been updated to the third generation, so the phenomenon of engine burning oil generally rarely occurs. It is worth mentioning that according to market feedback, the engine equipped in this car generally does not experience the phenomenon of burning engine oil, although a slight burning of engine oil may still occur. Below is some relevant information about the Audi Q5L: 1. Exterior: The new Audi Q5L measures 4765×1893×1659mm in length, width, and height, with a wheelbase of 2908mm. The front face is angular with a hexagonal air intake grille, similar to the family Q7, and the overall style has changed from the rounded shape of the old Q5 to a more aggressive one. After lengthening, the body length and wheelbase have been improved compared to the old Q5. 2. Power: It adopts a newly upgraded power combination, equipped with the third-generation EA888 engine (available in two versions of 2.0T high and low power, with the high-power version having a maximum power of 185kW and a peak torque of 370Nm), a newly developed 7-speed Stronic 'sports car level' transmission, and the quattro-ultra intelligent four-wheel drive system.
2
2
Share

How to adjust the high beam height of Audi A4L?

Audi A4L high beam height adjustment method: You can adjust it yourself using the knob behind the headlight assembly with a tool. There are two white components on the headlight housing, one for adjusting up and down, and the other for left and right. Additionally, some models have an interior headlight height adjustment knob, which allows for electric adjustment. In terms of appearance, the new Audi A4L features a completely redesigned exterior and chassis. The front and rear of the car closely resemble the Audi A5, with smooth and rounded lines at the rear. The slightly raised design of the trunk lid helps stabilize the airflow at the rear during high-speed driving. The polygonal taillights on both sides extend inward, and instead of using the currently popular LED bulbs, the taillight assembly still employs conventional components.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.