Why does the vehicle idle shake after replacing new spark plugs?

Why does the car prompt for an oil change?

The reason the car prompts for an oil change is: insufficient oil level, indicating it's time to change the oil. When the oil level is too low, the oil pump's pumping capacity decreases or fails to pump oil due to air intake, leading to a drop in oil pressure. Another possible reason is the use of inappropriate oil. If the wrong type or grade of oil is used, the engine may experience increased leakage due to the oil's low viscosity, resulting in reduced oil pressure. Method to clear the oil change prompt: Press and hold the minute button next to the instrument panel to reset it. Below is related information: 1. Engine oil serves functions such as lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption, all of which protect the engine. 2. Engine oil, or engine lubricant, is a substance enhanced with additives in a base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. 3. The main functions of engine oil are to reduce friction and wear of moving parts and to remove sludge (one of the functions of dispersants) and varnish (function of detergents) from the engine.

15

0

Share

How many more years can a National 4 car be driven?

As long as the car is in good condition, a National 4 vehicle can continue to be driven, but some cities may impose driving restrictions on National 4 cars. Here is extended information about the National 4 emission standards: 1. The National 4 emission standard was implemented starting in 2011 until the National 5 standard was introduced in 2018. Vehicles produced between 2011 and 2017 generally comply with the National 4 standard. The National 4 standard requires emissions of various pollutants to be approximately 50% lower than those under the National 3 standard. 2. The National 4 emission standard is the fourth stage of China's motor vehicle pollutant emission standards. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, the standard aims to control and reduce vehicle emissions to levels below specified limits.

6

1

Share

How Many Kilometers Should a Car Generally Drive Before Maintenance?

Generally, maintenance should be performed every six months or when the car has driven around 5,000 kilometers. Below are relevant details about car maintenance: 1. During the break-in period, do not exceed 60 mph. 2. When the new car reaches 2,300 kilometers, perform the first maintenance, which is usually free. Change the engine oil, three filters (oil filter, air filter, and fuel filter), and gear oil. This is crucial because the first oil and gear oil changes remove fine metal shavings from the break-in process. Not changing them can damage the engine. After that, change the engine oil and three filters every 5,000 kilometers. 3. Avoid driving at a single speed for extended periods and do not add any metal anti-wear additives. 4. Start in a low gear and maintain the engine coolant temperature between 80-90°C. Shift gears promptly while driving and avoid prolonged use of a single gear to ensure proper break-in for all gears. Also, avoid driving in high gear at low speeds or low gear at high speeds. 5. After starting the car, let it warm up until the coolant reaches the optimal temperature before driving. Choose smooth roads, maintain moderate speeds, apply gentle throttle, and avoid sudden acceleration or braking. 6. Do not tow other vehicles, as towing can cause significant harm, such as engine damage or frame deformation, with no benefits.

15

2

Share

How to reset the maintenance light of a 2018 Jeep Renegade?

Jeep Renegade maintenance light reset method is as follows: 1. Press the power button to turn on the vehicle's power. 2. Slowly press and release the accelerator pedal three times within 10 seconds. 3. Then press the selection button on the steering wheel, and the "Reset" prompt will appear on the information bar. Press and hold the "OK" button on the steering wheel for a few seconds. 4. Finally, press the one-touch start button again to turn off the engine. Here is some related information: When the maintenance light comes on, it means the car's maintenance time has arrived. Some models cannot manually operate the maintenance light and require the manufacturer's specialized equipment to clear the code.

6

4

Share

Should You Press the Clutch When Shifting Gears?

Manual transmission cars require pressing the clutch. Here are the correct methods for using the clutch: 1. Correct posture for pressing the clutch. When pressing the clutch pedal, place the ball of your foot on the pedal with your heel touching the ground. Keep your knee slightly bent when the clutch is fully depressed. 2. Press the clutch all the way down. Avoid keeping the clutch engaged for too long; ensure it is completely disengaged. 3. Timing the clutch release. When driving, do not release the clutch too quickly or deliberately raise the engine RPM too high, as this accelerates clutch wear. 4. Fully depress the clutch pedal before shifting gears. 5. When pressing the clutch pedal, quickly release the accelerator pedal. 6. Coordinate clutch operation with gear shifting. If the gear does not engage smoothly, release the clutch first, then press it again before shifting. Never force the gear shift, as this can cause gear friction and damage the transmission. 7. Avoid resting your left foot on the clutch pedal while driving. 8. Never use your right foot to press the clutch pedal under any circumstances while driving.

12

0

Share

What engine does the Volvo C70 use?

The Volvo C70 used a total of three engines, as follows: 1. 2.3-liter turbocharged engine: It has a maximum power output of 245 horsepower and 330 Nm of torque. This engine can deliver maximum power at 5,400 rpm and maximum torque at 2,400 rpm. It is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 5AT transmission. 2. 2.4-liter naturally aspirated engine: It has a maximum power output of 170 horsepower and 230 Nm of torque. It can deliver maximum power at 6,000 rpm and maximum torque at 4,400 rpm. This engine is equipped with multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 5AT transmission. 3. 2.5-liter turbocharged engine: It has a maximum power output of 230 horsepower and 320 Nm of torque. This engine can deliver maximum power at 5,000 rpm and maximum torque between 1,500 and 5,000 rpm. It is equipped with a VIS (Variable Inertia Intake System) and uses an aluminum alloy cylinder head and block. This engine is paired with a 5AT transmission.

20

4

Share

Why does the vehicle idle shake after replacing new spark plugs?

Why does the car prompt for an oil change?

How many more years can a National 4 car be driven?

How Many Kilometers Should a Car Generally Drive Before Maintenance?

How to reset the maintenance light of a 2018 Jeep Renegade?

Should You Press the Clutch When Shifting Gears?

What engine does the Volvo C70 use?

How long is the break-in period for a car engine?

Mercedes-Benz GLC300 Brake Pad Noise Issue?

How Long Does It Take for Subject 2 to Be Processed?

How to Adjust the Left and Right Height of the Cruze Headlights?