Why does the tricycle feel sluggish and fail to accelerate when the throttle is applied?

What does it mean when the car's faucet-shaped yellow light is on?

When the car's faucet-shaped yellow light is on, it indicates that the engine (exhaust system) malfunction indicator light is illuminated. Below is relevant information about the car's faucet-shaped yellow light being on: 1. Different scenarios of the car's faucet-shaped yellow light being on: If the faucet-shaped light turns off a few seconds after starting the engine, this is a normal system self-check. If this yellow faucet-shaped light remains steadily lit, it may indicate a fault in the exhaust system. If the light flashes intermittently, it suggests engine misfire or catalytic converter damage. 2. Reasons for the car's faucet-shaped yellow light being on: Main causes include poor fuel quality not meeting standards, spark plug carbon buildup, oxygen sensor malfunction, engine knocking, damaged coolant temperature sensor, or engine cylinder misfire. 3. How to respond when the car's faucet-shaped yellow light is on: If the car's coolant temperature gauge and oil pressure warning light haven't activated, the vehicle can still be driven but must proceed with caution at reduced speed, seeking the nearest auto repair shop for inspection. If the coolant temperature is too high or the oil pressure warning light also illuminates, and obvious vehicle malfunction is detected, immediately pull over and request roadside assistance.

17

3

Share

What is a safety hammer used for?

It is mainly used to smash glass for escape in emergency situations such as fires or car submersion, with the blade at the end of the handle used to cut seat belts for escape. Currently, bus window glass is generally made of high-hardness and high-strength organic glass, which is difficult to break with fists or feet, making it hard for passengers to break the window for escape in emergencies. Therefore, modern buses, especially air-conditioned ones, are usually equipped with 4 to 6 safety hammers on both sides of the compartment. The striking position for the safety hammer is the four corners of the window glass. Below is an introduction to safety hammers: 1. Design concept of safety hammers: The pull-handle safety hammer combines the interior safety pull-handle and escape hammer in its design. In an emergency, pressing a button releases the handle, allowing it to be used as a safety hammer, making it quicker to break the window and increasing the chances of escape. 2. How to operate a safety hammer: Pick up the safety hammer and strike the four corners of the tempered glass, avoiding the center as it is the strongest part. Since some glass has film, it may not fall off immediately after breaking; you can kick it open. Once the glass falls off, exit the vehicle body promptly and in an orderly manner, moving to a safe location.

5

0

Share

What to Do When a Car Reaches Its Scrapping Period?

When a car reaches its scrapping period, the following steps should be taken: 1. Settle all traffic violations and accidents involving the vehicle first. 2. Apply for the vehicle owner to fill out various application forms: The owner should obtain and complete one copy each of the Application Form for Vehicle Modification, Transfer, Alteration, Suspension, and Scrapping Approval, and affix the owner's seal. 3. Apply at the registration acceptance counter: For vehicles that have reached the scrapping age, a "Vehicle Scrapping Notice" will be issued. For vehicles that have not reached the scrapping age but are deemed to meet the scrapping standards after inspection by the vehicle inspection counter, a "Vehicle Scrapping Notice" will be issued. 4. Deliver the car to a recycling company for dismantling. 5. Settle the residual value: After verifying the "Notice," the recycling company will dismantle the vehicle and take photos, and then settle the residual value. 6. Complete the scrapping registration: The owner should submit the "Modification Form," "XX Province Vehicle Renewal Technical Appraisal Form," "Scrapped Vehicle Recycling Certificate," and photos of the dismantled vehicle to the vehicle inspection counter for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed after approval according to regulations. 7. Obtain the scrapped vehicle recycling certificate.

16

0

Share

Is Paint Peeling on a New Car Covered by the Three Guarantees?

Paint peeling caused by scratches is due to human factors and does not constitute a vehicle quality issue, therefore it is not covered under warranty. However, it falls under accidental damage to the vehicle, and you can request the vehicle's insurance company to assess and compensate for the damaged parts. Below is relevant information regarding car warranties: 1. Documentation: You need to bring the vehicle registration certificate, driver's license, and warranty manual. 2. Timeframe: The vehicle must be within the warranty period, which varies for different vehicles. 3. Vehicle Issues: The malfunction must be within the scope specified in the warranty manual, and the warranty periods for different components vary.

3

0

Share

Is the Highway Free on Mid-Autumn Festival?

Normally, highways are not free during the Mid-Autumn Festival. Below are the details of the toll-free periods: 1. Toll-Free Periods: In 2021, toll roads were free during four national statutory holidays—Spring Festival, Qingming Festival, Labor Day, and National Day—as well as the consecutive holidays determined by the State Council. 2. Eligible Vehicles: The toll-free policy applies to passenger vehicles with seven seats or fewer (including seven seats) and motorcycles allowed on regular toll roads.

15

2

Share

What are the advantages and disadvantages of a DVVT engine?

Here is a detailed introduction to the advantages and disadvantages of a DVVT engine: 1. Advantages: The DVVT engine features advanced technology that reduces intake and exhaust overlap, ensuring stable combustion; it minimizes intake loss, improves combustion efficiency, enhances fuel economy, and saves on fuel costs. DVVT technology can better regulate the air-fuel mixture ratio, reduce the generation of nitrogen oxides, and make emissions more environmentally friendly. 2. Disadvantages: Since DVVT is a relatively advanced technology, its drawbacks include high manufacturing difficulty, elevated production costs, and higher maintenance and repair expenses in the long run.

13

0

Share

Why does the tricycle feel sluggish and fail to accelerate when the throttle is applied?

What does it mean when the car's faucet-shaped yellow light is on?

What is a safety hammer used for?

What to Do When a Car Reaches Its Scrapping Period?

Is Paint Peeling on a New Car Covered by the Three Guarantees?

Is the Highway Free on Mid-Autumn Festival?

What are the advantages and disadvantages of a DVVT engine?

Can You Drive with Low Engine Oil?

What are the penalties for speeding between 70% and 100% over the limit?

What to Do When Your Purchased Car is Recalled?

What Causes a Dash Cam to Flash On and Off?