Why does the transmission system warning light come on but disappear after restarting?

Should You Adjust the Seat or Fasten the Seat Belt First When Getting in the Car?

When getting in the car, you should adjust the seat first and then fasten the seat belt. According to the scoring rules for the Subject 2 driving test, failing to fasten the seat belt when starting the car will result in disqualification. Below is additional information about Subject 2: Bring all necessary documents: The Subject 2 test requires identity verification, so you must bring your ID card. If you pass Subject 2, you may immediately proceed to schedule learning for Subject 3 at the driving school. Pay attention to observation: Prepare in advance. When entering the test section for Subject 2, it is crucial to prepare ahead of time, as this is highly significant for successfully completing the test. For example, when parking on a slope, adjusting the distance between the car and the roadside line before reaching the slope will save time for parking.

8

3

Share

Does Car Insurance Require the Owner to Be Present?

Not necessarily. Here is some relevant information about car insurance: Compulsory Insurance (Traffic Accident Liability): Mandatory insurance that provides compensation for third-party rights in the event of an accident. Vehicle Damage Insurance: Covers losses caused by accidents to the vehicle, and it is recommended to insure for the full amount. Whole Vehicle Theft Insurance: Note that if the car is stolen, a police report must be filed promptly. If the car is not found within three months, the insurance company can only compensate with proof from the public security authorities. Passenger Liability Insurance: Covers accidental injuries to the driver or passengers in the car, including medical expenses after an injury. Glass Breakage Insurance: Covers situations where the glass is smashed or prone to breaking independently.

9

5

Share

Is Fully Synthetic or Semi-Synthetic Oil Better for Maintenance?

Fully synthetic oil is better for car maintenance. Here is the relevant introduction to synthetic oil: Introduction: Synthetic oil is manufactured by humans using chemical methods. Depending on the intended use, the various components of synthetic oil can be altered. The development of synthetic oil began in the 1930s. At that time, due to the demanding conditions of aircraft oil usage, which required a higher-performance oil, some chemical plants began to develop and produce synthetic oil. Expansion: Synthetic oil is of better quality, and its use can be noticeably felt in the following aspects: smoother cold starts, especially in northeastern regions; more fuel-efficient; longer oil change intervals, equivalent to 1.5 times or more of conventional lubricants; extends engine life and reduces maintenance rates; due to the superior cleanliness of synthetic oil, the engine cylinder remains cleaner.

5

Share

Which Transmission is Suitable for Aggressive Driving?

You can opt for a Class A transmission. Below is relevant information about transmissions: Introduction: Refers to a device that changes speed ratios and the direction of motion. Used in automobiles, tractors, ships, machine tools, and various machinery. Main Functions: Under constant engine speed and torque, it alters the vehicle's driving force and speed (gear shifting); allows the vehicle to move in reverse (direction change); enables the engine to stop without stalling (neutral gear). Based on the transmission form, gear-type transmissions can be categorized into three types: dual-shaft, three-shaft, and compound. The dual-shaft type has two main shafts (excluding the reverse gear shaft) and only undergoes one pair of gear reductions. The three-shaft type has three main shafts (input shaft, intermediate shaft, output shaft) and undergoes two pairs of gear reductions. The compound type consists of two transmissions connected in series or parallel to achieve more gear positions with fewer gears.

9

2

Share

Can Cars Be Parked in Underground Garages During Heavy Rain?

It is advisable to avoid parking in underground garages. Here are some parking precautions: Signal waiting parking: For signal waits exceeding one minute, the engine should be turned off to save fuel and be environmentally friendly. For waits under one minute, you may keep the engine running, shift to neutral, and engage the handbrake, but never leave it in gear. Maintain distance when pausing on the road: During traffic jams or when waiting at traffic lights, always leave enough space to maneuver out in case the car ahead breaks down, preventing you from being stuck in the middle. Use turn signals when starting from the roadside: Before resuming driving after a roadside pause, thoroughly observe the road conditions. Check not only the rearview mirrors but also turn your head to look. Once everything is clear, turn on the signal, honk, and proceed. Use turn signals for roadside pauses: When temporarily stopping by the roadside, always activate the turn signal in advance and check the rearview mirrors to ensure there are no cars or pedestrians before pulling over.

16

2

Share

What is the Difference Between Engine Seizing and Cylinder Scoring?

Here are the differences between engine seizing and cylinder scoring: Cylinder scoring: Refers to the appearance of obvious longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the movement range of the piston rings. In severe cases, adhesive wear occurs, leading to difficulties in starting the engine or causing it to stall on its own. Cylinder scoring is a major engine failure. The root cause of cylinder scoring is the inability to form an oil film between the cylinder wall and the piston rings or piston, resulting in poor lubrication or even dry friction. Engine seizing: Occurs when the piston expands due to excessively high temperatures and gets stuck in the cylinder, causing the engine to fail. Simply put, engine seizing is caused by abnormal combustion that leads to irregular pressure in the combustion chamber. Common causes of engine seizing include design flaws in the car, poor-quality engine oil and poor operating conditions, inaccurate adjustments to the engine's intake and exhaust systems and ignition timing, and excessive engine load.

1

5

Share

Why does the transmission system warning light come on but disappear after restarting?

Should You Adjust the Seat or Fasten the Seat Belt First When Getting in the Car?

Does Car Insurance Require the Owner to Be Present?

Is Fully Synthetic or Semi-Synthetic Oil Better for Maintenance?

Which Transmission is Suitable for Aggressive Driving?

Can Cars Be Parked in Underground Garages During Heavy Rain?

What is the Difference Between Engine Seizing and Cylinder Scoring?

What does 'Maintenance A Overdue' mean?

What are the types of ground traffic markings at intersections?

What Does 'Maintenance is Approaching' Mean?

Should You Turn on Hazard Lights During Heavy Rain?