Why does the Toyota Alphard have two logos?

1 Answers
McAddyson
09/04/25 8:12am
Toyota Alphard has two logos because it is an imported model. Some imported Toyota vehicles use one logo at the front, while the Toyota logo is used at the rear. Below are the relevant details: 1. Front Logo: The front logo of the Toyota Crown is a crown emblem, which comes in gold and silver colors, while the rear logo is the Toyota emblem. The different colored logos seen on the Crown indicate different grade versions of the series. The gold logo Crown, whether in terms of performance or configuration, is superior to the silver logo Crown. 2. Rear Logo: The rear logo of the Alphard is the Toyota emblem, while the front α logo is exclusive to Toyota's luxury MPV—the Alphard, which holds the title of 'King of MPVs' in China. The logo is said to be derived from the Latin letter α.
Was this review help?
12
2
Share
More Forum Discussions

How far can you drive if the antifreeze has completely leaked?

You cannot drive if the antifreeze has completely leaked, and the reasons are: 1. In cold climates, it can cause the engine or radiator to freeze and crack; 2. It affects the radiator's cooling efficiency, preventing normal circulation and leading to overheating, which can damage the engine. The functions of antifreeze are: 1. To provide freeze protection for the engine against low temperatures; 2. To offer efficient cooling; 3. To prevent the coolant from freezing and cracking the radiator or damaging the engine block and cylinder head during cold winter parking. Antifreeze, also known as antifreeze coolant, is a type of coolant with special additives, primarily used in liquid-cooled engine cooling systems. It contains: calcium chloride, methanol, ethanol, ethylene glycol, and glycerol.
2
4
Share

Is a DCT transmission considered an automatic transmission?

A DCT transmission is an automatic transmission, specifically a dual-clutch transmission, which consists of two sets of manual transmission units. An automatic transmission refers to a system where the driver does not need to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The clutch, located between the engine and the transmission, acts as a switch for power transmission between the engine and the transmission. It is a transmission structure capable of both transmitting and cutting off power. The gear positions of an automatic transmission are as follows: 1. P (Park) for parking; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral; 4. D (Drive) for forward driving; 5. S (Sport) for sport mode.
17
1
Share

How to Use the DS Gear Shift in an Automatic Transmission?

The method for using the DS gear shift in an automatic transmission is as follows: 1. Press the brake pedal; 2. Press the one-touch start button; 3. Start the vehicle after the dashboard lights up; 4. Place the automatic gear lever in the D or S position to enter manual mode; 5. Push the gear lever toward the plus (+) sign once to increase one gear; 6. Push the gear lever toward the minus (-) sign once to decrease one gear. An automatic transmission means the driver does not need to shift gears manually; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gear positions in an automatic transmission are: 1. P (Park) for parking; 2. R (Reverse) for reversing; 3. N (Neutral) for neutral; 4. D (Drive) for forward driving; 5. S (Sport) for sport mode.
1
3
Share

What is the wheelbase of the Skoda Superb?

The wheelbase of the Skoda Superb is 2841mm. The wheelbase is the distance from the center of the front axle to the center of the rear axle, measured between the centers of two adjacent wheels on the same side of the vehicle, perpendicular to the vehicle's longitudinal symmetry plane. The body dimensions of the Skoda Superb are: length 4869mm, width 1865mm, height 1489mm, with a fuel tank capacity of 68.5 liters. The Skoda Superb is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW at 5000 rpm and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
14
4
Share

How to cancel the tire pressure warning light on the Jade?

The steps to cancel the tire pressure warning light on the Jade are: locate the tire pressure reset button below the left side of the steering wheel, press and hold it for a few seconds, and the tire pressure warning light will be canceled. The dimensions of the Jade are: length 4667 mm, width 1775 mm, height 1530 mm, with a wheelbase of 2760 mm, a fuel tank capacity of 50 liters, and a minimum ground clearance of 110 mm. The Jade is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115 kW and a maximum torque of 203 Nm, paired with a CVT continuously variable transmission. It features a front MacPherson independent suspension and a rear double-wishbone independent suspension.
18
5
Share

What Causes Difficulty in Engine Starting?

Engine starting difficulties can be attributed to: 1. Excessive carbon buildup or blockage in the exhaust port and muffler; 2. Weak spark plug ignition energy; 3. Insufficient fuel line low pressure; 4. Battery depletion; 5. Exhaust pipe blockage; 6. Overly rich or lean air-fuel mixture; 7. Incorrect engine timing. The engine is the power-generating device of a vehicle, determining its power performance, fuel efficiency, stability, and environmental friendliness. Maintenance methods include: 1. Regular cleaning of the crankcase; 2. Ensuring good crankcase ventilation; 3. Periodic cleaning of the fuel system; 4. Regular radiator cleaning; 5. Timely replacement of engine oil and oil filter.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.