Why does the tire pressure monitor show 1.6bar and keep beeping?

2 Answers
VonAngelina
07/24/25 5:20pm
If a CRV suddenly prompts to check tire pressure, it means the tire pressure data of the vehicle is insufficient. It is necessary to inspect the tires to determine the causes of the low pressure and then perform repairs to resolve the issue. Only then can the vehicle be used normally; otherwise, it may affect driving safety. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates localized wear of the central tread pattern, shortening tire lifespan; Increases vehicle body vibration, indirectly affecting the lifespan of other components; Excessive stretching deformation of tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; Decreased puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts. Hazards of underinflated tires: Increases friction coefficient with the road surface, leading to higher fuel consumption; Causes heavy steering and deviation, compromising driving safety; Increases movement of tire parts, leading to abnormal heat due to excessive rolling; Reduces the functionality of cords and rubber, causing delamination or cord breakage, and excessive friction with the rim, resulting in bead damage and abnormal wear; Multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to blowouts; Increases tire deformation, leading to sidewall cracks and excessive heat from flexing, accelerating rubber aging, cord fatigue, and breakage, while also increasing the tire's contact area and accelerating shoulder wear.
Was this review help?
5
2
Share
Ellen
08/11/25 9:36am
A few days ago while driving, I also encountered the tire pressure display showing 1.6bar followed by continuous alarm beeping, which was really a headache. Upon getting out of the car, I noticed the left front tire was visibly flat—it turned out a small nail had punctured it, causing a slow leak. The tire pressure monitoring system is designed this way; it alerts you to inflate when the pressure drops below a safe threshold, such as 1.8bar. In summer, the hot weather causes air to expand easily, making the alarm more sensitive to even slight air loss. Now, I always keep an air pump in my car. Whenever the alarm sounds, I stop immediately to manually check, confirm which tire is leaking, and then carefully drive to a repair shop to fix the tire. Learning some basic maintenance beforehand saves a lot of hassle in daily life.
Was this review help?
2
2
Share
Expand All
More Forum Discussions

Do Hybrid Vehicles Need Charging?

Whether a hybrid vehicle needs charging depends on the specific model: 1. Standard hybrid vehicles do not require charging; 2. Plug-in hybrid vehicles require charging. Hybrid vehicles are a type of new energy vehicle that sits between pure electric vehicles and traditional fuel-powered vehicles. They feature both the conventional car components like the engine, transmission, drivetrain, fuel system, and fuel tank, as well as the electric vehicle components such as the battery, electric motor, and control circuitry. Hybrid vehicles can be categorized into: 1. Series plug-in hybrid; 2. Parallel plug-in hybrid; 3. Power-split or series-parallel plug-in hybrid.
20
0
Share

How to reset the tire pressure light on a Golf?

The method to reset the tire pressure light on a Golf is: 1. Start the engine and the dashboard will light up; 2. Press and hold the tire pressure reset button for 3 seconds. The Golf is a compact 5-door, 5-seat hatchback with body dimensions of: length 4296mm, width 1788mm, height 1471mm, and a wheelbase of 2636mm. The Golf is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, with a maximum power of 85 kW and a maximum torque of 200 Nm. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension using a torsion beam non-independent suspension.
10
5
Share

What are the reasons for no response when pressing the one-button start?

The reasons for no response when pressing the one-button start are: 1. The vehicle key is out of battery or the battery is about to run out; 2. The radio waves of the car key are being interfered with; 3. The steering wheel is locked; 4. The car has a malfunction. The functions of the one-button start include: 1. Multiple start modes; 2. Convenient and fast; 3. Stable and reliable performance; 4. Intelligent sensing entry; 5. Dual-mode free switching for smart keys; 6. Smart card backup key; 7. Intelligent silent car wash mode. The steps to start a one-button start car are: 1. Sit in the driver's seat and press the start button, at which point the ACC light will turn on, then press the button again for the vehicle to perform a self-check; 2. Press the brake and press the one-button start key to ignite and start the engine; 3. Release the foot brake; 4. Press the foot pedal, shift into drive gear, and release the handbrake; 5. Release the foot brake and press the accelerator to complete the start.
13
5
Share

What is the Difference Between Mineral Oil and Synthetic Oil?

The differences between mineral oil and synthetic oil are: 1. Different base oils: The base oil of mineral oil is refined from petroleum; the base oil of synthetic oil is artificially synthesized. 2. Different replacement intervals: Mineral oil should be replaced every 5,000 kilometers or less; synthetic oil should be replaced every 10,000 kilometers. The effects of not changing the oil for a long time are: 1. It will cause the oil to become ineffective and deteriorate, increasing wear and damage to mechanical parts; 2. The sealing effect will be reduced, making the oil watery and losing its sealing function; 3. The cooling effect will be reduced; 4. Sediment impurities will corrode internal mechanical parts; 5. The lubrication performance of bearings and the lubrication and cooling functions of mechanical transmission parts will disappear, affecting the good driving condition of the vehicle; 6. The engine may be damaged; 7. Sludge may be generated, leading to engine failure.
17
3
Share

How to reset the tire pressure light on a Lexus ES250?

The method to reset the tire pressure light on a Lexus ES250 is as follows: inflate the tires to the correct pressure, turn on the ignition, press the SET button for three seconds, and then turn off the power. The Lexus ES250 is a mid-to-large-sized 4-door, 5-seater sedan with body dimensions of 4915mm in length, 1820mm in width, and 1450mm in height, with a wheelbase of 2820mm. The Lexus ES250 is equipped with a 2.5L naturally aspirated engine and a 6-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 235 Nm. It features front-wheel drive, with a front suspension using a MacPherson strut independent suspension and a rear suspension using an independent double-wishbone MacPherson strut with a stabilizer bar.
2
1
Share

What do the S and L gears in an automatic transmission car mean?

In an automatic transmission car, the S gear stands for Sport mode, while the L gear represents Low gear. When using the S gear, the shift points occur at higher RPMs compared to normal mode, resulting in more aggressive power delivery, greater torque output, and improved acceleration. The L gear is primarily used when descending long slopes, as it allows the engine to assist in braking during downhill driving. It also helps maximize engine torque when climbing steep inclines. The steps to start an automatic transmission car are as follows: 1. Sit in the driver's seat and press the start button; 2. Depress the brake pedal and press the start button to ignite the engine; 3. Release the foot brake and allow the car to warm up; 4. Depress the brake again and shift into D (Drive) gear; 5. Release the parking brake and gradually lift your foot off the brake pedal to start moving.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.