Why Does the Tire Pressure Keep Showing Low?

1 Answers
VioletRose
07/30/25 10:29am
Tire pressure keeps showing low due to: damage to the car tire or slow air leakage. Hazards of driving with low tire pressure: 1. Increased fuel consumption: because low tire pressure increases the contact area between the tire and the ground, increasing friction, which naturally leads to higher fuel consumption; 2. Affects handling: low tire pressure makes the car's steering heavier, affecting the car's handling and making it prone to veering; 3. Increased risk of blowouts: the increased contact area with the ground also increases friction, which can cause the tire temperature to rise excessively during high-speed driving, leading to blowouts; 4. Reduced tire lifespan: low tire pressure accelerates tire wear during driving, reducing the tire's lifespan.
Was this review help?
6
0
Share
More Forum Discussions

What are the dimensions of the BMW X1 model?

The dimensions of the BMW X1 model are 4454mm × 1798mm × 1545mm. Below is some related information about the BMW X1: 1. Exterior: As a mid-cycle facelift model, the overall proportions remain largely consistent with the current version, with the main updates being the addition of the latest family design elements in certain details. The iconic double kidney grille is larger in size, paired with a sporty front bumper, delivering a stronger visual impact. Additionally, the headlight assembly has been visually enhanced, with the inclusion of spoon-shaped LED daytime running lights that make the car appear sharper and more imposing. 2. Interior: The interior retains the styling of the current model, with changes also focused on details, such as the use of a new-style electronic gear shift lever, further enhancing the sense of luxury inside the cabin. The new BMW X1 comes standard with LED headlights, front sport seats, an electronic gear shift lever, six-color ambient lighting, and a driver-side welcome logo.
16
3
Share

Where is the USB port in the Vezel?

Honda Vezel's USB port is located at the bottom of the center console, in the middle of the gear lever. The USB port in the car has two functions: one is to charge the mobile phone, and the other is to play music with a USB flash drive. Some models do not have the charging function, so you can only buy a cigarette lighter car charger to replace it. The following is an introduction to the USB port in the car: 1. Functions: (1) Insert a USB flash drive to listen to songs. (2) Charge the mobile phone. (3) USB car cigarette lighter. (4) Car vacuum cleaner. (5) Electronic dog, driving recorder. 2. Precautions for using the USB port: (1) You must charge when the car engine is started to avoid the phenomenon of electrical burning due to unstable car power supply. (2) Do not supply too many electrical appliances, which will cause too much load and damage the car battery and generator.
10
4
Share

Why is there a sudden scraping metal sound from the car's chassis?

Here are the reasons for a sudden scraping metal sound from the car's chassis: 1. Disc brake noise: This is caused by damage, deformation, or detachment of the brake shoe support plate, vibration damping spring plate, or guide plate of the disc brake, which increases the gap between the brake shoe and the caliper support frame, leading to mutual impact and noise. You can go to a repair station to fix the deformed parts or replace the detached ones. 2. Front suspension ball joint noise: The gap between the ball joint and its seat becomes larger, causing severe looseness. Since the ball joint seat is a sealed structure and cannot be disassembled, in this case, you can only go to a repair station for replacement. 3. Front wheel shock absorber noise: The vehicle is usually driven on rough roads with improper maintenance, causing the shock absorber to leak oil and become damaged. At a repair station, the severity of the damage will determine whether it needs repair or replacement.
10
0
Share

What Causes Abnormal Noises After a Car Goes Through Water?

Here are the specific reasons for abnormal noises after a car goes through water: 1. Water on brake pads: If the vehicle does not go through deep water and water splashes onto the brake pads, it is normal to hear abnormal noises when braking. 2. Foreign objects between brake pads and calipers: If the vehicle does not go through deep water, foreign objects such as plastic bags or mud in the water may get stuck between the brake pads and calipers, causing abnormal noises when braking. 3. Water ingestion in the exhaust pipe: If the vehicle goes through deep water, water may enter the engine through the exhaust pipe, preventing the fuel and air mixture from burning properly, leading to abnormal noises. 4. Foreign objects stuck in the chassis: If foreign objects get stuck in the chassis after the vehicle passes through a waterlogged area, abnormal noises may occur while driving.
14
1
Share

How long does it take for a Porsche Panamera to accelerate from 0 to 100 km/h?

Porsche Panamera accelerates from 0 to 100 km/h in 4.1 to 5.8 seconds. Below are the specifications for the 2021 Porsche Panamera: 1. Vehicle Dimensions: It is classified as a full-size car with the following dimensions: length 5049mm, width 1937mm, height 1423mm, and a wheelbase of 2950mm. 2. Powertrain: The Porsche Panamera features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.9T twin-turbocharged engine, delivering a maximum horsepower of 330PS, a maximum power output of 243kW, and a peak torque of 450Nm. It is paired with an 8-speed dual-clutch transmission.
7
1
Share

How to Release the Automatic Parking Brake in an Automatic Transmission Vehicle?

There are two methods to release the automatic parking brake in an automatic transmission vehicle: 1. After the engine starts, when the driver's side door is closed and the vehicle begins to move, the parking brake will automatically release. 2. With the ignition switch on or the engine running, press the brake pedal, first pull the handle backward while holding the lock button at the end of the handle, then push the handle all the way down to manually release the parking brake. Below is more information about the parking system: 1. The parking brake, commonly known as the handbrake, functions to provide resistance when parking, preventing the vehicle from rolling. The parking brake, whether it's a handbrake or the parking gear in an automatic transmission, locks the drive shaft or rear wheels. 2. The parking brake applies much less force compared to the service brake, just enough to prevent the vehicle from rolling when parked on a slope.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.