Why does the temperature gauge of the Excelle fluctuate between four and five bars?

3 Answers
DeCharlie
07/23/25 4:03pm
The temperature gauge of the Excelle fluctuating between four and five bars indicates that the coolant temperature is between 90-100 degrees Celsius. The fluctuation occurs when the cooling fan activates to dissipate heat, causing the temperature to rise and fall intermittently. The normal operating temperature for a car's coolant is around 90 degrees Celsius, meaning it is normal for the temperature gauge needle to oscillate around the middle position. Below is more information about the Excelle's temperature gauge: 1. The Buick Excelle's coolant temperature is indicated by the letters C and H. C represents 60 degrees Celsius, so the temperature gauge will only start moving when the temperature exceeds 60 degrees. H represents 120 degrees Celsius, meaning each bar corresponds to 7.5 degrees Celsius. 2. If the temperature is abnormally high, it may indicate a faulty thermostat. If you notice the temperature rising excessively during normal driving, you can open the engine hood and touch the radiator's inlet and outlet hoses to check for a temperature difference. If there is a difference, it suggests a thermostat malfunction. It could also be due to a faulty gauge or a malfunctioning coolant temperature sensor.
Was this review help?
18
3
Share
AlexanderDella
08/10/25 11:52am
My Buick Excelle's temperature gauge keeps fluctuating between the fourth and fifth bars. Having driven this car for seven or eight years, I've encountered similar issues before. Such fluctuations in the temperature gauge usually indicate a problem with the temperature sensor or related circuits – it could be worn sensor contacts or dust interference causing unstable signal transmission. Additionally, if air enters the cooling system or the coolant level is insufficient, it can also cause erratic temperature readings. My case was relatively simple to resolve: I first checked the coolant level to ensure it was normal, then took it to a professional shop for diagnosis. The technician cleaned the sensor interface, and it returned to normal operation. Poor temperature control can easily lead to engine overheating, accelerated wear, and even shortened lifespan. I recommend drivers pay more attention to dashboard indicators before driving and address any abnormalities early – don't wait until the temperature spikes to start worrying.
Was this review help?
8
4
Share
Expand All
MacAna
09/22/25 5:54am
The temperature gauge indicates the engine operating temperature, and the normal range for the Buick Excelle should remain stable around the midpoint. A sudden jump of four or five notches could stem from several common factors. For instance, a faulty or moisture-affected temperature sensor may cause delayed feedback; a damaged thermostat that fails to open or close properly can lead to coolant flow issues and temperature fluctuations; or poor contact in the dashboard circuitry might result in erratic data readings. Last time I helped a friend with this issue, I advised him to first check the coolant condition using a test pen to see if contamination altered its pH level. While fixing dashboard issues isn't overly complicated, delaying repairs can escalate costs. Maintaining a clean cooling system is crucial—regular coolant changes and sensor inspections can prevent problems and avoid unexpected breakdowns.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

How to Charge a Motorcycle When the Battery is Dead?

When a motorcycle runs out of battery, the charging methods are as follows: You can remove the battery from the vehicle and charge it using a dedicated charger. If you don't have a charger, you can take it to a professional motorcycle repair shop for charging by experts. Before charging, first remove the battery from the motorcycle and inspect it. If there is obvious sulfation, deposits accumulated below the electrodes, or cracks and leakage on the battery's outer surface, the battery should be replaced. Motorcycle batteries are maintenance-free valve-regulated lead-acid batteries, utilizing advanced production processes such as leak-proof and high-sealing technologies, along with special design structures. They do not require water replenishment during use, providing the market with a large number of high-performance battery products.
15
0
Share

Where is the engine of the Ruifeng S4 produced?

Ruifeng S4 engine is produced in the engine production plant of Jianghuai Automobile, and it is independently developed by Jianghuai Automobile. The Ruifeng S4 is a compact SUV, equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 1.6-liter naturally aspirated engine. In terms of body dimensions, the Ruifeng S4 measures 4410mm in length, 1800mm in width, and 1660mm in height, with a wheelbase of 2620mm. The Ruifeng S4 uses a MacPherson strut independent suspension at the front and a torsion beam non-independent suspension at the rear. Although the Ruifeng S4 features a dual waistline design on the side, it differs significantly from other models, with one line rising and extending to the vicinity of the taillights and another descending to the bottom of the rear door.
3
0
Share

How to Turn Off the Rear Wiper on Audi Q5?

Audi Q5 method to turn off the rear wiper: The rear wiper is mainly located at the middle and lower end of the rear windshield. The wiper control lever is positioned on the lower right side of the steering wheel. Push the wiper lever to the OFF position to turn off the rear wiper. By default, it is in the OFF state. Pushing the wiper control lever down one notch activates the rear wiper operation. The Audi Q5 has body dimensions of 4629mm in length, 1898mm in width, and 1655mm in height, with a wheelbase of 2807mm. It is equipped with a 2.0TFSI four-cylinder inline engine and a 7-speed Stronic dual-clutch transmission, providing ample power output, smooth gear shifting, and quick acceleration.
1
3
Share

Why does the car clutch pedal not return after being pressed down?

Delayed or difficult clutch return is a serious issue, and the best solution is to have it inspected and repaired at a 4S shop or repair facility as soon as possible, as the actual situation may be more complex. Below are some specific reasons for delayed or difficult clutch return: 1. Air in the clutch hydraulic system: This causes excessive clutch travel and poor return. You can diagnose this issue yourself—if the clutch pedal rises only after repeatedly pressing it, it is mostly due to air entering the hydraulic system. In such cases, the cause of the air ingress should be identified and repaired promptly. 2. Contaminated or impure clutch fluid: This can lead to severe wear of the clutch master cylinder's internal piston or clogging of the return oil hole, preventing the clutch from returning. 3. Increased vehicle mileage: Insufficient tension or breakage of the clutch return spring can cause the clutch pedal to not return.
20
3
Share

What does a cumulative score of zero points on a driver's license mean?

Cumulative score of 0 points means: The driver has not been penalized with points for violating road traffic safety laws. Relevant regulations: In addition to administrative penalties, the traffic management department of the public security authority implements a cumulative scoring system (hereinafter referred to as scoring) for motor vehicle drivers' road traffic safety violations, with a scoring cycle of 12 months. If a driver accumulates 12 points within one scoring cycle, the traffic management department of the public security authority will confiscate their motor vehicle driver's license. The driver must then participate in road traffic safety law and regulation training and take an exam as required. If the exam is passed, the points will be cleared and the driver's license returned; if the exam is failed, the driver must continue with training and exams.
4
3
Share

How to Remove Black Paint Sprayed on Car Rims?

Methods to remove black paint sprayed on car rims: 1. Use gasoline or banana oil, soak a towel with some, and scrub the rim vigorously; 2. If it still cannot be removed, it is safer to go to a store and seek professional help; 3. If it is spray paint, you can try using solvents to wipe it off, such as toluene or xylene, but since these solvents can damage the paint and are also harmful to rubber, you should be careful when handling it yourself. When there are stubborn stains on the rim surface, it is advisable to use a professional cleaning agent, which can often gently and effectively remove the stains while minimizing damage to the aluminum alloy surface. Additionally, the rim itself has a layer of metal protective film, so extra care should be taken not to use paint brighteners or other abrasive materials during cleaning.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.