···
Log in / Register

Why Does the Self-Balancing Scooter Shake Violently?

4 Answers
Leonard
09/07/25 3:05am

When the natural frequency of the self-balancing scooter matches that of the rider, a resonance phenomenon occurs. During resonance, the rotational speed causes shaking, leading to vibrations in the scooter body. Here is some relevant information about self-balancing scooters: Introduction: Electric self-balancing scooters, also known as hoverboards, Segways, or personal transporters, are primarily categorized into unicycle and two-wheel types in the market. Their operation is based on a fundamental principle called "Dynamic Stabilization." With the increasing awareness of environmental protection, the number of electric vehicles has been growing rapidly. Technical Principle: The operation principle is mainly based on a fundamental concept called "Dynamic Stabilization," which refers to the vehicle's inherent self-balancing capability. Built-in precision solid-state gyroscopes are used to detect the posture of the scooter. The central microprocessor then calculates appropriate commands at high speed and drives the motor to achieve balance.

Was this review help?
16
5
Share
DelCaleb
09/19/25 2:35am

I recently experienced severe wobbling with my self-balancing scooter, which was really scary! While riding, the scooter was shaking left and right like an earthquake, giving me quite a fright. I suspected it might be a tire issue since worn-out tires can cause imbalance, especially on uneven roads. Upon inspection, I found that the tire was indeed bulging and deformed, so I need to replace it with one matching the original model as soon as possible. Additionally, worn motor bearings could also trigger wobbling, as aging parts can't operate smoothly. To avoid similar issues, I now perform a quick check on the tires and motor before each ride to ensure nothing is loose. Regular maintenance is also crucial—avoid overloading, as it accelerates component wear. In short, safety comes first. If you notice severe wobbling, stop immediately and get it fixed—don't push your luck!

Was this review help?
4
5
Share
Expand All
McCarmen
11/02/25 2:57am

I just bought a self-balancing scooter not long ago, and found that it shakes violently as soon as it starts up, with the body jerking uncontrollably, which makes me very uncomfortable. I think the reason might be my improper usage, such as riding too fast on gravel roads, or the body sensors being blocked by dust affecting accuracy. Loose battery connections could also cause unstable power supply leading to shaking. I remember having the same issue after riding in the rain once, possibly due to water seeping into the internal circuits. Now I've learned my lesson: first wipe the shell with a dry cloth to avoid dust buildup, and regularly clean the connectors. If it shakes, try placing it on flat ground and restarting to see if it improves. Keep operations simple, don't always push the limits—new riders need to take it slow. Protecting the scooter means protecting yourself.

Was this review help?
6
0
Share
Expand All
HectorAnn
12/16/25 3:01am

Balance board shaking is commonly caused by motor malfunctions or software calibration issues. With my experience in electronic toys, I know these core components are crucial. Motor aging can lead to uneven rotation speeds, causing body vibrations. If the bearings are damaged, the entire unit may need replacement. On the software side, outdated firmware versions or sensor drift misjudging the center of gravity can easily cause abnormal jumping and shaking. It's best to regularly connect to the APP to upgrade the system and fix bugs, then manually reset the calibration settings. Additionally, unstable battery voltage can affect synchronized power output—check for corrosion at the charging port. Developing maintenance habits, such as thoroughly cleaning the internal structure every quarter, can significantly extend the vehicle's lifespan and reduce issues.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

How to use the L and R buttons next to the driver's seat?

How to use the L and R buttons next to the driver's seat: L stands for the left side mirror. Press the button to L, then use the up, down, left, and right buttons below to adjust the position of the left side mirror. R stands for the right side mirror. Press the button to R, then use the up, down, left, and right buttons below to adjust the position of the right side mirror. Methods to judge the distance of the rear vehicle using the side mirrors: 1. Using the center of the side mirror as a reference line, when the vehicle body is on the outer side of the reference line and the rear vehicle cannot be fully seen, the distance is 5m. 2. When the rear vehicle can be fully seen in the side mirror and the vehicle body is pressing against the reference line, the distance is 10m. 3. When the rear vehicle is pressing against the central axis of the side mirror and there is still a width of one vehicle between the vehicle in the mirror and the outer edge of the mirror, the distance is 15m.
1
0
Share

How to Turn Off the Camry Radio?

The method to turn off the Camry radio is: press the volume adjustment button. Taking the 2019 Camry 2.0L as an example, its body dimensions are: length 4885mm, width 1840mm, height 1455mm, wheelbase 2825mm, fuel tank capacity 60L, and curb weight 1530kg. The 2019 Camry 2.0L features a front MacPherson strut independent suspension and a rear E-type multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 210Nm, paired with a 10-speed continuously variable transmission.
1
4
Share

How to Reapply for a Lost Subject 3 Score Sheet?

If you lose your Subject 3 score sheet, you can notify your driving school to handle the reapplication process, and students do not need to worry about it. Here is some relevant information about the Subject 3 exam: 1. Subject 3 Scheduling: For a C1 driver's license, Subjects 2 and 3 can be scheduled together and taken consecutively. According to Article 36 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": The vehicle management office shall arrange the test according to the scheduled test site and time. After passing Subject 1, applicants can schedule Subject 2 or Subject 3 road driving skills test. 2. Hour Requirements: Subject 3 requires a total of 40 hours, including 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical training. According to the teaching syllabus, driving training is recorded with a time card, and hours are cumulative. Each student can sign for a maximum of 4 hours per day.
14
4
Share

Does painting a car on rainy days have any impact?

Painting a car on rainy days does have an impact, as the paint surface is prone to bubbling. Methods for maintaining car paint include: 1. Wash the car after the engine has cooled down; 2. Reduce exposure to direct sunlight; 3. Clean dirt and stains from the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze. The main car paint processes are: 1. Electrophoretic paint, which prevents rust and corrosion; 2. Primer paint, which resists UV rays and stone chipping, providing a base for the color paint; 3. Color paint layer, which enhances aesthetics; 4. Clear coat layer, which adds gloss and resists friction.
19
5
Share

What is the replacement cycle for halogen headlights?

The replacement cycle for halogen headlights is one to two years. The steps to replace the headlights are: 1. Open the engine compartment cover, locate the dust cover behind the headlight assembly, and unscrew the dust cover directly along the threaded direction; 2. After removing the dust cover, find the bulb base inside the headlight assembly, pinch the wire clip next to the base, and once the clip is released, the bulb can be taken out; 3. After installing the new bulb, reattach the dust cover and close the engine compartment cover. Types of car lights: 1. Headlights, the front lighting of the car is divided into low beam and high beam; 2. Fog lights, used in foggy conditions when visibility is poor; 3. Brake lights, which illuminate when braking, installed at the rear of the car.
17
3
Share

How to Turn on the Nissan Teana Headlights?

Nissan Teana headlight operation method: 1. Turn the left light control switch forward one notch for parking lights; 2. Turn forward twice for low beam; 3. Push the light control lever forward once for high beam; 4. Lift the light control lever forward and upward once for right turn signal. Precautions for headlight usage are: 1. Turn on low beam when driving at night; 2. Do not use high beam when a following vehicle is driving close to the preceding vehicle in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic light control at night, alternate between high and low beams to signal.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.