Why does the Roewe RX5 suddenly fail to accelerate when stepping on the gas pedal?

1 Answers
MacAva
07/30/25 2:57am
Roewe RX5 suddenly failing to accelerate when stepping on the gas pedal could be due to issues such as fuel line blockage or exhaust system blockage. Introduction to the Roewe RX5: 1. Exterior: The Roewe RX5 adopts the "Rhythm Design" language, equipped with a matrix LED headlight composed of 24 LED light sources. The body lines are stylish and dynamic, featuring a dual-waistline design on the side, with a roof-mounted luggage rack, giving the entire vehicle a rhythmic and tension-filled appearance. 2. Power: Initially, models equipped with SAIC's "Blue Core" traditional powertrain system were launched, offering a choice between 1.5T and 2.0T engines.
Was this review help?
20
5
Share
More Forum Discussions

How to close windows after the vehicle is turned off?

Start the car engine and activate the vehicle's electronic systems. Here are two points for window maintenance: 1. Window defogging: Slightly open the windows to allow air circulation between the interior and exterior, maintaining consistent temperatures to prevent condensation on the inner surface of the windshield. Turn on the air conditioning to adjust the cabin temperature and eliminate fog on the windshield. Additionally, applying a thin layer of glycerin, alcohol, or saline solution as an anti-fog agent on the windshield can prevent short-term fogging on the inner surface. 2. Electric window maintenance: Pay attention to the oil level in the door's internal lift mechanism to ensure smooth operation of the electric window switches. Dirty or damaged glass can also cause resistance, so it's important to keep the windows clean regularly.
6
5
Share

How deep should a tire sidewall cut be before replacement?

Here is relevant information on how deep a tire sidewall cut should be before replacement: 1. It is recommended to replace the tire if the sidewall cut is 4mm deep: Since the rubber thickness of a tire sidewall is often no more than 1cm, it is advisable to replace the tire when the sidewall cut reaches 4mm. 2. When the internal cord layer of the sidewall is damaged: If the cut is not severe and does not reach the cord layer of the tire, it can still be used even if it exceeds 4mm. However, if the internal cord layer of the sidewall is damaged, the tire should be replaced even if the cut is less than 4mm, as there is a risk of a blowout.
17
3
Share

How to Deal with U-turns in Dangerous Sections?

U-turns are not allowed in dangerous sections. The following are the relevant regulations and handling methods for illegal U-turns: 1. U-turn according to signs: According to Article 49 of the "Regulations for the Implementation of the Road Traffic Safety Law", motor vehicles are not allowed to make U-turns at locations with no U-turn or no left-turn signs or markings, as well as at railway crossings, crosswalks, bridges, sharp curves, steep slopes, tunnels, or sections prone to danger. 2. Do not obstruct others: Motor vehicles can make U-turns at locations without no U-turn or no left-turn signs or markings, but they must not obstruct the passage of other normally moving vehicles and pedestrians. 3. Penalty methods: According to Article 90 of the "Road Traffic Safety Law", motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules will be given a warning or fined between 20 and 200 yuan.
12
2
Share

Where is the fuel filter of the Geely Vision X6 located?

The fuel filter of the Geely Vision X6 is located above the fuel tank. The main function of the gasoline filter is to filter impurities in the gasoline, ensuring that the gasoline entering the engine's combustion chamber is cleaner and burns more completely. This reduces the formation of carbon deposits in the cylinders and improves power output. Here are some details about the gasoline filter: 1. Gasoline filters (abbreviated as fuel filters, English name: Fuel-Filter) are divided into carburetor type and fuel injection type. For gasoline engines using carburetors, the gasoline filter is located on the inlet side of the fuel pump, operating under lower pressure, and usually has a nylon shell. For fuel-injected engines, the gasoline filter is located on the outlet side of the fuel pump, operating under higher pressure, and typically has a metal shell. 2. The filter element of the gasoline filter is mostly made of filter paper, but some use nylon cloth or polymer materials. The main function of the gasoline filter is to remove impurities from the gasoline.
12
0
Share

What Are the Reasons Why the Car Still Won't Start After Jump-Starting the Battery?

The reasons why the car still won't start after jump-starting the battery: 1. First, confirm whether the voltage of the connected battery is correct. 2. Additionally, check if the jumper cables are thick enough and if the connections are secure. If everything is confirmed to be normal, there may be issues with other components of the vehicle. It is recommended that the owner tow the car to a 4S shop for inspection and repair. Extended content: During regular use of the car, owners need to periodically test and maintain the battery. Avoid using electrical devices in the car for extended periods after the engine is turned off. Repeatedly starting the vehicle can easily cause the battery to discharge multiple times and become damaged. The time interval between multiple starts should not be less than 15 seconds.
2
1
Share

How many kilometers should the Edge's transmission fluid be changed?

The transmission fluid of the Edge should be changed every 55,000 kilometers. Here is some relevant information: 1. Transmission fluid is an oil product that keeps the gear system clean, lubricates and extends the life of the transmission device, and provides effective lubrication even at low temperatures. It reduces oil loss under harsh operating conditions. Depending on the structure of the transmission, transmission fluid is divided into automatic transmission fluid and manual transmission fluid. 2. Most transmission fluids can be used in automatic transmissions available on the market. In fact, each automatic transmission design has different technical requirements. Even the same model of transmission configured in different vehicle models will have differences in torque, weight, speed, structure, etc. Therefore, the original manufacturer specifies its own dedicated transmission fluid. Different transmission fluids are one of the factors that affect the quality of gear shifting.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.