Why does the reversing camera display show no signal?

1 Answers
GabriellaLynn
07/29/25 2:31pm
The reasons why the reversing camera display shows no signal: 1. The data cable connected to the reversing camera is loose or has poor contact; 2. The reversing camera is broken. It is necessary to check the connection cable to make a judgment and understand the real cause of the fault. The reversing camera is installed at the rear of the vehicle and uses a far-infrared wide-angle camera device, which can display obstacles behind the vehicle through the display screen inside the car. After shifting into reverse gear, the system will automatically connect to the high-definition reversing camera at the rear of the vehicle, clearly displaying the situation behind the vehicle on the reversing LCD screen, allowing the driver to clearly see the road conditions behind the vehicle for reversing operations.
Was this review help?
2
3
Share
More Forum Discussions

Does the Li ONE need to be charged?

Li ONE needs to be charged. Here are the specific details about the Li ONE: Suspension: The front suspension adopts a MacPherson independent suspension, while the rear suspension uses a multi-link independent combination. Body dimensions: The Li ONE is an extended-range hybrid vehicle with body dimensions of 5020mm in length, 1960mm in width, 1760mm in height, and a wheelbase of 2935mm. Ground clearance: The minimum ground clearance of the Li ONE is 180mm, its body weight is 2300kg, and the fuel tank capacity is 45L.
5
5
Share

Detailed Explanation of the 3rd Generation Haval H6 Adaptive Cruise Control?

Adaptive Cruise Control System. Below are the relevant instructions: Activating Cruise Control: Pull the lever backward (toward the driver's side) once to activate cruise control. At this point, it is only activated, and the dashboard will display the vehicle icon and driving trajectory in gray, indicating that cruise control has not yet started. Active Pause: If you need to pause cruise control while driving, push the cruise lever forward (toward the front of the vehicle) once or apply the brakes to pause cruise control. The vehicle icon and driving trajectory on the dashboard will display in gray. To resume, lift the lever upward once to restore the previous settings and restart cruise control. Passive Pause: During cruise control, if the driver applies the brakes or accelerator, the system will automatically pause cruise control, and the vehicle icon and driving trajectory on the dashboard will display in gray. To resume, lift the lever upward once to restore the previous settings and restart cruise control.
7
4
Share

ID4 Maintenance Precautions?

First maintenance is at 500 kilometers. The following are relevant details: Battery: To properly maintain a pure electric vehicle, the focus should be on maintaining its three-electric system, especially the power battery section. Apart from the three-electric system, other aspects of maintenance are not significantly different from traditional fuel vehicles. Fast Charging: Fast charging causes considerable damage to the power battery due to the high current involved. Therefore, the charging strategy for pure electric vehicles should prioritize slow charging, supplemented by fast charging. If home charging station installation is feasible, it is better to charge as needed. Reduce Fast Charging: Reducing the frequency of fast charging helps minimize overcharging of the power battery, while maintaining good driving habits helps avoid over-discharging. For instance, during regular driving, try to avoid sudden acceleration and deceleration, and refrain from high-speed racing to minimize power battery over-discharge issues.
18
2
Share

What brand is the Wuling CVT transmission?

Wuling CVT transmission is the Liuzhou Wuling brand. Introduction to CVT transmission: It is a relatively simple automatic transmission in structure, with a straightforward internal design consisting of only two cone pulleys and a steel belt. The steel belt moves along the cone pulleys to achieve gear shifting and torque variation, ensuring a smooth transition without any jerking during the process. Introduction to other transmissions: Other transmissions include DCT (Dual Clutch Transmission), which is developed based on manual transmissions. The structure of a DCT is similar to that of a manual transmission but includes an additional clutch and a set of gear-shifting mechanisms. In a DCT, one clutch controls the odd-numbered gears, while the other controls the even-numbered gears. AT (Automatic Transmission), or torque converter transmission, connects to the engine via a torque converter. The AT transmission contains multiple planetary gears, relying on them for gear shifting and torque variation.
3
3
Share

What are the central control features of the 2021 Touareg?

It features an intelligent driving view function and the latest electronic gear shift lever. Here are the specific details: Intelligent Driving View Function: The function includes ACC adaptive cruise control, lane change assist, lane departure warning, lane keeping, and active braking. Latest Electronic Gear Shift Lever: The 2021 new Touareg X is equipped with the latest electronic gear shift lever, which has a very exquisite design, with the P parking gear and one-touch start ignition switch on top. At the same time, due to the adoption of the electronic gear lever, there is more storage space under the gear shift area. The 4MOTION four-wheel drive system is available on models above the 380TSI, and comes with a variety of driving modes and off-road modes, including standard, sport, economy, as well as mountain, snow, and off-road.
13
0
Share

Is the A3 transmission dry or wet?

The A3 transmission is a dry type, specifically a 7-speed dry dual-clutch transmission, which delivers very stable performance. The difference between dry and wet transmissions lies in the working environment of the clutch: dry clutch plates transmit torque in the natural environment inside the transmission, while wet clutch plates transmit torque while immersed in oil. Wet clutch plates can dissipate heat through the oil, whereas dry clutch plates cannot achieve good heat dissipation under intense movement, resulting in less effective cooling for the transmission. This can sometimes lead to severe transmission vibration, which is why wet transmissions can handle engines with higher torque. The A3 has a length of 4343mm, width of 1815mm, height of 1458mm, and a wheelbase of 2630mm.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.