Why does the Regal audio suddenly have no sound?

2 Answers
DeGavin
07/24/25 8:24pm
The reason why the Regal audio suddenly has no sound is that the power amplifier module is broken. You can also check whether the MUTE button is pressed for silence. If the problem cannot be identified, you can go to the 4S store for repair. The following is a related introduction about the Buick Regal: 1. Introduction to the Buick Regal: As one of the most successful strategic models of the Buick brand, the Regal has been highly favored by users for its trendy, dynamic, and technological product image and comprehensive technical strength. The Buick Regal integrates General Motors' global advanced technology. While inheriting traditional advantages, it meets the continuously increasing car usage needs of consumers in the new era with innovative product strength, bringing new driving value beauty, and realizing the evolution of dynamic style, ride quality, and technological attributes again. 2. The power system of the Buick Regal: The new Buick Regal offers two sets of drivetrain options, combining advanced technology with high durability. While balancing performance and fuel economy, it precisely meets the diversified needs of users with different power combinations.
Was this review help?
10
1
Share
DelEmily
08/11/25 11:08am
My car also had the issue of the audio suddenly going silent before. That time, I was driving home from work, listening to the radio when it suddenly went completely quiet, and I was totally stunned. Experience tells me that the first thing to do is rule out simple mistakes, like whether the volume was accidentally adjusted or the mute button was pressed—especially in models like the Regal, where the center console controls are complex and prone to accidental touches. Then, check the Bluetooth connection; if the connection to the phone is unstable or disconnects, it might interrupt the audio output. If none of these are the issue, it’s likely a blown fuse. The fuse box in the Regal is located next to the driver’s seat in the armrest compartment—find the audio-related fuse and check if it’s blown. Replacing a new fuse isn’t expensive, but be careful not to damage the wiring if doing it yourself. Loose or aged wiring can also cause signal interruptions, especially in older Regals where wire harness connectors are prone to coming loose. Having no audio while driving not only affects your mood but also reduces driving focus, so I usually just drive straight to the repair shop and let the technician diagnose it with instruments. It’s usually fixed quickly, saving money and ensuring safety. Regularly checking the audio system during maintenance can prevent such issues.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Where is the oxygen sensor located?

There are generally two oxygen sensors, one located behind the exhaust manifold and the other behind the three-way catalytic converter. The oxygen sensor behind the exhaust manifold is called the front oxygen sensor, while the one behind the three-way catalytic converter is called the rear oxygen sensor. The oxygen sensor can detect the oxygen content in the exhaust and then feed the data back to the ECU. The ECU can adjust the air-fuel ratio based on this data. In engines using a three-way catalytic converter to reduce exhaust pollution, the oxygen sensor is an essential component. Since the purification capability of the three-way catalyst for CO, HC, and NOx drops sharply once the air-fuel ratio of the mixture deviates from the theoretical air-fuel ratio, an oxygen sensor is installed in the exhaust pipe.
6
1
Share

Can the Front and Rear Oxygen Sensors Be Interchanged?

Front and rear oxygen sensors cannot be interchanged, and it is recommended that car owners avoid doing so. Oxygen sensors are installed in the exhaust system of a vehicle, positioned before and after the three-way catalytic converter. These sensors are crucial for the proper functioning of the car; without them, the vehicle cannot operate normally. The three-way catalytic converter is located in the front section of the exhaust pipe, with oxygen sensors installed both before and after it. In engines equipped with three-way catalytic converters to reduce exhaust emissions, the oxygen sensor is an essential component. Since the purification capability of the three-way catalyst for CO, HC, and NOx drops sharply if the air-fuel ratio deviates from the theoretical value, oxygen sensors are installed in the exhaust pipe to monitor the oxygen concentration in the exhaust.
14
2
Share

How to Adjust Car Rearview Mirrors?

Methods for adjusting car rearview mirrors: position the horizon in the middle and place the left ear on the side. Align the distant horizon with the center line of the central rearview mirror, then adjust left and right until the image of the driver's right ear just appears at the left edge of the mirror. Car rearview mirrors are located on both sides of the vehicle's front and inside the car. They reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas, acting as a second pair of eyes and expanding the driver's field of vision. Car rearview mirrors are important safety components, with their mirror surface, shape, and operation being carefully designed. The quality and installation of rearview mirrors are subject to industry standards and should not be adjusted arbitrarily.
20
4
Share

Is Wheel Balancing Necessary After Tire Rotation?

Wheel balancing is necessary after tire rotation, but wheel alignment is not required. The reason for performing wheel balancing is: A car's wheel is an assembly consisting of the tire and the rim. Due to manufacturing variations, the mass distribution of this assembly may not be perfectly uniform. When the wheel rotates at high speeds, this can lead to dynamic imbalance, causing symptoms such as wheel wobble and steering wheel vibration during driving. Key tire maintenance tips include: 1. Always maintain consistent and correct tire pressure; 2. Promptly remove any foreign objects like stones from the tires; 3. Regularly clean tires and rims if covered in mud; 4. Schedule periodic wheel alignments and tire balancing; 5. Rotate tire positions after certain mileage intervals; 6. Replace tires immediately if they show bulges, wear down to the tread wear indicators, or develop cracks.
9
0
Share

What is the appropriate tire pressure for front and rear tires?

Maintaining the standard tire pressure of 2.3bar for both front and rear tires is suitable. The standard tire pressure varies for different car models, and it can be checked at the fuel filler location of each vehicle. The first row in the tire pressure chart indicates the standard tire pressure. The standard tire pressure ranges from 2.4 to 2.5bar, with variations depending on specific conditions. Tire pressure refers to the air pressure inside the tire, which is essentially the 'blood pressure' of the car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. Tire pressure is an indicator of the car's load capacity, as the load capacity depends on the tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, higher tire pressure increases the load capacity, while lower pressure decreases it.
2
0
Share

What is the function of a strut bar?

The function of a strut bar is to enhance body rigidity and improve the stability of the vehicle during cornering. The full name of the strut bar is the front shock absorber top tie bar, which is commonly referred to as a balance bar in car modifications, also known as a strut bar or front strut bar. The term 'bar' in English means a tie rod. When a car is cornering, centrifugal force causes the vehicle to lean, leading to the suspension of the inner and outer wheels stretching and compressing. However, a softer suspension can exacerbate the lean during cornering. After installing a strut bar, although the stiffness of the car's suspension remains unchanged, the connection of the two front suspensions increases the rigidity of the front part of the car. During cornering, the deformation of the two front suspensions is reduced, and the rebound force generated by the twisting and stretching of the strut bar is used to suppress body roll.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.