Why Does the Power Steering Pump Make a Buzzing Noise When Turning?

Introduction to XRV Automatic Transmission Gears - What Are the Gear Positions?

The XRV automatic transmission car features gear positions labeled P, R, N, S, L, and D, each with different gear combinations that deliver varying power outputs. Shifting Methods: L: Simply push the gear lever directly to L. D: Drive gear. Press the brake to shift from P to this gear. S: Sport mode. Shifting operation is similar to D gear. To exit S mode, pull the lever back once. N: Neutral gear. Hold the side button and push the lever upward. R: Reverse gear. If in N position, continue pushing the lever upward. P: Parking gear. Simply press the "P" button next to the side key. Manual Mode: When in "D" gear, push the lever to the right. Push upward to increase gears and downward to decrease gears. The XRV automatic transmission model is equipped with a CVT gearbox. At different speeds, the car "shifts gears," meaning it selects different gear combinations to output power. Detailed Introduction: P Gear: "Parking" means stopping. This is the parking gear, used when parking. After reaching your destination or for long-term parking, shift the lever into this position. Note: The vehicle must be completely stopped before shifting into P gear. Engaging P gear before a full stop can damage the automatic transmission. In P gear, the wheels are mechanically locked to prevent movement, so always use it when parking on slopes. However, avoid shifting into P during brief stops (e.g., at traffic lights) to prevent severe transmission damage in case of a rear-end collision. R Gear: "Reverse" means backward movement. Whether manual or automatic, R is the reverse gear. Engaging R makes the car move backward. Only shift into R when the vehicle is stationary and the engine is idling. Never use R while moving forward, and be cautious with acceleration when reversing. N Gear: "Neutral" means disengaged, also called the neutral gear. Use this gear when waiting at traffic lights while pressing the brake. For longer waits, engage the handbrake to rest your foot. S Gear: "Sport" indicates the sport mode. In this gear, shift timing is delayed for increased power, typically used for overtaking. L Gear: "Low" means low-speed driving gear. In this gear, the transmission operates only in low gear (equivalent to manual 1st gear) and does not shift automatically. Use L for climbing or descending steep slopes. Low gear provides high torque for uphill climbs, while engine braking helps control speed downhill, reducing brake wear. D Gear: "Drive" means moving forward. In this gear, pressing the accelerator makes the car move. The transmission shifts automatically based on speed and throttle input. At traffic lights, you can stay in D while braking. For short waits, this is fine, but prolonged idling in D can overheat the transmission fluid. The CVT gearbox replaces traditional gears with a pair of pulleys and a steel belt. Each pulley consists of two conical discs forming a V-shape. The engine connects to the smaller pulley, driving the larger one via the belt. The CVT's pulley design allows adjustable width—hydraulic pressure moves the discs inward or outward, altering the belt's position to change gear ratios smoothly. Without conventional gears, CVT eliminates shift shocks, delivering linear power output for a smoother drive. Theoretically, CVT offers infinite gear ratios, optimizing balance between performance, fuel efficiency, and emissions. CVT outperforms traditional automatics in mechanical efficiency and fuel economy, second only to manual transmissions. However, it’s costlier and more prone to issues if mishandled. A limitation is the steel belt’s load capacity, though advancements are addressing this, paving the way for CVTs in high-torque vehicles.

6

0

Share

Is Chery's Engine Truly Independently Developed?

Chery's engine is a brand independently developed by Chery. It is the first automotive engine brand in China to fully possess independent intellectual property rights, operate on a large scale, and achieve international recognition. The Chery series of engines represents the first domestic engine brand that is entirely self-sufficient from design and research to production and manufacturing, with Chery holding complete independent intellectual property rights. The Chery ACTECO engine signifies a "zero" breakthrough for Chinese people in the field of new-generation high-performance automotive engines, pioneering the development and manufacturing of high-performance independent brand engines. The Chery ACTECO series of engines is the first domestic engine brand that is entirely self-sufficient from design and research to production and manufacturing, with Chery holding complete independent intellectual property rights. During the design and development process, Chery also engaged in deep technical collaboration with Austria's AVL, a globally top-tier internal combustion engine design and development company, extensively absorbing a wealth of the most advanced contemporary internal combustion engine technologies. Its technological integration is internationally leading, with key technical indicators such as power, fuel consumption, and emissions reaching world-class levels. This marks a "zero" breakthrough for Chinese people in the field of new-generation high-performance automotive engines, pioneering the development and manufacturing of high-performance independent brand engines. The most prominent advantages of the ACTECO series engines are their core technologies with complete independent intellectual property rights, production processes and management upgrades synchronized with international top-tier standards, and massive production scale. These advantages directly translate into product benefits for vehicles equipped with ACTECO engines. Large-scale production reduces engine manufacturing costs, gradually lowering vehicle manufacturing costs while improving vehicle quality due to mastery of core technologies. Lower core component costs and vehicle manufacturing costs mean reduced purchase and long-term usage costs for consumers, providing significant competitive pricing advantages. Chery Automobile Co., Ltd. was established on January 8, 1997. With the strategic goal of building an "international brand," the company has become China's largest independent brand automobile manufacturer integrating R&D, prototyping, production, and sales of complete vehicles, powertrains, and key components after 19 years of innovative development. It is also China's largest passenger vehicle exporter. The company has an annual production capacity of 900,000 complete vehicles, 900,000 engine sets, and 800,000 transmissions. It has established five passenger vehicle product platforms: A00, A0, A, B, and SUV, with products covering 11 major series and 21 models. Chery aims for "safety, energy efficiency, and environmental protection" as its product development goals and has successively obtained international quality system certifications such as ISO9001 and ISO/TS16949 from Germany's TÜV Rheinland.

4

3

Share

What is the white color of Kia K3?

Dongfeng Kia K3 offers two white colors: one is Pearl White, and the other is Crystal White. Be sure to specify the color clearly in the contract when making your choice. Below is some relevant information about the Kia K3: 1. Vehicle Dimensions: The Kia K3 is a compact 4-door, 5-seater sedan with body dimensions of 4660mm in length, 1780mm in width, and 1450mm in height, with a wheelbase of 2700mm. 2. Engine: The Kia K3 is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 96 kW at 5500 rpm and a maximum torque of 211 N·m between 1400 and 3700 rpm.

5

4

Share

Can Car Vacuum Cleaners Be Left in the Car During Summer?

Car vacuum cleaners can be left in the car during summer. Here are the relevant details: 1. Types: There are generally two types: one that uses batteries, which can be charged at home and used independently of the car, and another that draws power from the cigarette lighter, designed for plug-and-play use with power circuits meeting the cigarette lighter's supply standards. 2. Precautions: Before using a car vacuum cleaner, check if the power fuse can handle the startup and operating current of the vacuum cleaner. When the dust reaches a certain level or after use, clean it by pressing the clip on the dust cover to open and remove the dirt. It's advisable to wear a mask while vacuuming, as using the cleaner can stir up dust, making it easier to inhale. Never place hands or feet under the suction opening to avoid danger. Watch for any blockages in the suction tube, unusual noises, or smoke during use. If any of these occur, stop using the vacuum immediately. Clear any blockages before continuing use; otherwise, the vacuum's motor may burn out.

13

5

Share

What is the reason for the Chery engine malfunction light being on but the car running normally?

The engine malfunction light being on may be a warning, indicating that certain system parameters of the car may have exceeded the set range. At this time, the car can continue to drive, and the light is generally yellow. There is also a more serious situation where the light is red, indicating a very severe malfunction. The car may still be able to drive, but for safety reasons, it must be stopped immediately, the engine turned off, and driving prohibited until the fault is checked. There are mainly 7 reasons for the engine malfunction light being on: Sensor malfunction: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine malfunction light to come on. Fuel quality issue: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear, leading to the malfunction light coming on. Poor mixture combustion: Poor mixture combustion can cause engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the malfunction light will come on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, fuel line blockage, etc., can all cause poor mixture combustion in the engine. Turbocharging issue: The intake turbocharging pipeline and turbocharger can also cause the engine malfunction light to come on. The most common is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, power loss, metal noise, and blue or black smoke from the exhaust pipe. Intake issue: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, the engine malfunction light will come on. If the air filter is not clean and not regularly cleaned, it can lead to intake problems. Exhaust issue: Exhaust malfunction can also cause the engine malfunction light to come on. Rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the three-way catalytic converter, or engine fuel supply system failures can easily cause three-way catalytic converter malfunctions. Anti-theft system malfunction: If the car's electronic anti-theft system malfunctions, or the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to not work properly, and the engine malfunction light will come on. If the engine malfunction light is on, you can follow these steps: First, pay attention to whether the engine is running normally, whether there is shaking, smoke, etc. If so, try not to start it again. Especially note that if the light is red, do not start the engine again. If the engine can start, turn it off for 5-10 minutes, then without pressing the brake, press the start button once, or without pressing the clutch, turn the key halfway to the 'on' position. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe whether the malfunction light on the dashboard goes off. If the malfunction light does not go off, please go to a service station as soon as possible to find the cause. The service station can read the fault code with a portable diagnostic tool to obtain fault information and perform targeted repairs.

14

3

Share

What to Pay Attention to When Picking Up Your Car After Repair

When picking up your car after repair, you need to pay attention not only to the condition of the car when stationary but also to its performance while driving. Stationary inspection: The car should be parked on a flat surface for easy inspection. This inspection mainly ensures that other components were not affected during the repair process, such as inconsistent tire pressure between the left and right tires, issues with springs and shock absorbers, or deformations in the frame or fenders. The inspection includes observing the vehicle's exterior, checking the front of the car, inspecting the driver's cabin, examining the rear of the car, checking the fuel tank, and verifying the installation of the spare tire. Common post-repair issues include uneven tire pressure between the left and right tires, problems with springs and shock absorbers, or deformations in the frame or fenders. The owner should inspect the front of the car, including the driver's cabin, engine hood, left and right fenders, and front bumper, to ensure everything is properly aligned. Driving inspection: During the driving inspection, the engine should reach normal operating temperature, and you should check if all the gauges are functioning correctly. While driving, pay attention to whether the clutch disengages completely, engages smoothly and reliably, and operates without shaking or unusual noises. Initially, maintain a low speed of 2-3 km/h to allow the chassis components to warm up to normal temperature, and listen for any abnormal sounds. Gently press the brake pedal to test if the brakes are responsive and effective, then gradually increase speed. When testing the steering wheel, the steering system should be light and flexible, with no tendency to pull to one side.

1

2

Share

Why Does the Power Steering Pump Make a Buzzing Noise When Turning?

Introduction to XRV Automatic Transmission Gears - What Are the Gear Positions?

Is Chery's Engine Truly Independently Developed?

What is the white color of Kia K3?

Can Car Vacuum Cleaners Be Left in the Car During Summer?

What is the reason for the Chery engine malfunction light being on but the car running normally?

What to Pay Attention to When Picking Up Your Car After Repair

Where is the Kia Crankshaft Position Sensor Located?

Is the Porsche fuel tank on the right or left side?

Can I Still Study After Failing the Traffic Violation Reduction Test Three Times?

Why is the fuel consumption of the Hyundai Verna so high?