Why does the newly purchased wiper blade leave water streaks and fail to clean properly?

What is the difference between tire pressure display and tire pressure warning?

The biggest difference between tire pressure display and tire pressure warning is that the tire pressure display can visually show the tire pressure, while the tire pressure warning is just an alarm system that alerts when the tire pressure is too high or too low. What to do if the tire pressure is insufficient: If there is no visible damage to the car's tires, you can simply inflate them to the normal tire pressure and then reset the tire pressure system. If a puncture is found upon inspection of the car's tires, you need to drive to a car repair shop promptly to have the tire repaired before reinflating it. If the tire pressure warning appears again some time after inflating, but there is no hole in the tire, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. The working principle of tire pressure monitoring is: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to a central receiver module.

1

Share

What are the colors of the Lynk & Co 03?

The Lynk & Co 03 comes in five colors: white, black, gold, red, and blue. Here are some details about the colors of the Lynk & Co 03: 1. The Lynk & Co 03 only has five color options, so the choices are somewhat limited. 2. The body dimensions of the Lynk & Co 03 are 4639mm in length, 1840mm in width, and 1460mm in height, with a wheelbase of 2730mm. 3. The front and rear brake types of the Lynk & Co 03 are ventilated disc and disc, respectively, with a handbrake for the parking brake. 4. In terms of safety features, the Lynk & Co 03 is equipped with front airbags for the driver and passenger, side airbags for the front seats, seatbelt reminder, rear child seat interface, tire pressure monitoring, ABS anti-lock braking, brake force distribution, brake assist, traction control, and electronic stability control. 5. The front and rear suspensions of the Lynk & Co 03 are MacPherson independent suspension and multi-link independent suspension, respectively, with electric power steering.

11

1

Share

What Causes the Clicking Sound When Braking at High Speed?

Here are the reasons for the clicking sound when braking at high speed: 1. If there is a clicking sound when braking hard, it is best to have it inspected at a professional repair shop. 2. Even if some noises are normal, such as during the break-in period of a new car or ABS operation, braking is a critical aspect of driving safety, so it's better to be cautious. Below is more information about braking: (1) If you hear a "click" sound between the transmission and the gear lever when pressing the brake pedal, the main cause is the electronic linkage between the braking system and the automatic transmission. Pressing the brake activates the transmission solenoid valve, producing the "click" sound, and you must press the gear lock button to shift—this serves as a safety reminder. (2) If the clicking sound occurs even with light braking, or if your vehicle does not have an automatic gear lock button, or if the sound is continuous or recurring, you should be very careful. It is highly likely that there is a fault in the braking system or a loose connection in the chassis. For safety reasons, the owner should promptly take the vehicle to a 4S shop for inspection.

1

0

Share

What are the reasons for abnormal noises in the Lavida on bumpy roads?

Common causes of abnormal noises in the Lavida when driving on bumpy roads or over potholes may include the following: 1. Oil leakage or bending of the shock absorber itself, which can be resolved by direct replacement. 2. Abnormal aging or wear of the shock absorber pressure bearing, which can be fixed by direct replacement or lubrication. 3. Deformation of the shock absorber spring, which requires direct replacement. 4. It could also be due to abnormal noise from the wheel bearing, which can be resolved by direct replacement. Below are some methods for checking shock absorber faults: 1. Check whether the shock absorber is leaking oil. Look directly at the shock absorber housing or dust cover when it is not raining or the car has not been washed. This can be easily seen at a glance. 2. Listen carefully. At low speeds, when the wheels pass over road bumps or experience slight vibrations, there may be a dull thudding sound. The noise from the shock absorber is different from other chassis noises—it is very muffled. If it is the front shock absorber, there may also be noticeable vibration felt on the steering wheel. An experienced driver can accurately determine which suspension is making the noise.

15

2

Share

What does the car view button mean?

Switch to display data such as mileage. The multifunction buttons on the steering wheel are usually designed for convenient driver operation, including volume adjustment and menu selection. Some models with car phones also place call answer and microphone buttons on the steering wheel. Below is an introduction to the multifunction steering wheel: 1. The multifunction steering wheel includes audio control, air conditioning adjustment, car phone functions, and some models even place the cruise control button on the steering wheel. 2. The driver can directly operate many in-car electronic devices from the steering wheel without searching for various buttons on the center console, allowing for better focus on the road ahead and significantly improving driving safety.

2

Share

How to use the one-touch window lift function on the new ix35?

Beijing Hyundai ix35 only has a one-touch lift function for the driver's side window, and the control switch has two positions. The first position is the same as a regular power window. After clicking and releasing the second position, the window will automatically open or close completely. The following is a related introduction to the window switch functions: 1. Window switch: Short press: The window will automatically descend. The window will automatically rise to the top. 2. Long press: When the window is descending, releasing the button will stop the window from descending; when the window is rising, releasing the button will stop the window from rising. 3. Smart key: The key emits weak radio waves, the car antenna receives the signal, and the electronic control unit identifies the signal code.

11

0

Share

Why does the newly purchased wiper blade leave water streaks and fail to clean properly?

What is the difference between tire pressure display and tire pressure warning?

What are the colors of the Lynk & Co 03?

What Causes the Clicking Sound When Braking at High Speed?

What are the reasons for abnormal noises in the Lavida on bumpy roads?

What does the car view button mean?

How to use the one-touch window lift function on the new ix35?

Which country produces Polestar cars?

What Are the Symptoms of a Faulty Transmission Oil Pump?

Where is the Envision fuse box located?

How Many Cylinders Does the BMW 7 Series Engine Have?