···
Log in / Register

Why does the new car's window glass make a screeching noise when rolling up and down on rainy days?

4 Answers
VanAddyson
07/30/25 1:32am

The reasons for abnormal noise during the window glass rolling up and down include foreign objects in the rubber guide rail, etc. Below are the specific reasons for the abnormal noise during window glass rolling up and down: 1. Dirty rubber guide rail of the door glass: The rubber guide rail of the door glass tends to accumulate dust, causing abnormal noise when the glass rolls up and down. In this case, you can first clean the dust in the rubber guide rail with water, dry the moisture, and then spray a little rubber protectant or lubricant on the rubber guide rail. The noise during glass rolling will then disappear. 2. Aging rubber guide rail of the door glass: The rubber guide rail of the door glass is exposed to sun and rain all year round, making it prone to aging and losing elasticity. When the glass rolls up and down, friction with the aged rubber guide rail will produce abnormal noise. This situation can only be resolved by replacing the rubber guide rail with a new one.

Was this review help?
11
3
Share
DeArya
08/15/25 7:15am

Having run an auto repair shop for years, I often encounter new cars whose windows emit screeching friction noises during rainy days. The primary cause is that new car components haven't fully broken in yet—for instance, the window guide rails or sealing strips are made of stiff materials that feel dry and rough. When rainwater seeps in, it significantly increases friction. Additionally, new cars often leave the factory with insufficient lubrication, and rainwater adhesion creates resistance, causing the rubber strips and glass to collide noisily during operation. You can first try a DIY solution: apply some automotive-grade silicone-based lubricant to the inner side of the window tracks and seals (perform this after the rain stops for instant relief). If the issue persists, it might indicate deformed guide channels or misaligned installation, requiring a 4S店 inspection and adjustment. This problem is quite common in new vehicles—don't overreact but don't ignore it either, as repeated operation could wear down components. Always ensure windows are fully closed when parked to minimize debris entry and protect the window regulator system. Regular maintenance extends lifespan and ensures smooth window operation.

Was this review help?
2
5
Share
Expand All
VonAva
10/20/25 7:41am

Right after I got my new car, the windows would squeak annoyingly when rolled up or down on rainy days. I guessed it was because the rubber seals were new and stiff, becoming even rougher when soaked by rainwater, increasing friction and causing that sharp noise. I tried fixing it myself: wiped the window frame gaps clean of dust and mud with a damp cloth, then ordered a window lubricant spray online and gave it a light spritz. The next day, the problem was much better. This is common during the break-in period of new cars and usually improves after a few weeks of driving. But if the noise persists after the rain stops, it might be an installation issue or debris in the tracks. It’s good to check with the manufacturer for advice. Remember, don’t force the switch to avoid damaging the motor. During regular car washes, pay attention to cleaning the window frames to prevent small stones from getting stuck. Don’t panic over minor issues with a new car—most can be solved simply. For safety, always ensure the windows operate normally before hitting the road.

Was this review help?
17
4
Share
Expand All
AutumnRose
12/03/25 8:12am

New car window squeaking in rainy conditions is often caused by dry or rough seals/guides increasing friction when wet. Insufficient factory lubrication and unbedded parts can make rubber strips scrape glass harshly during operation. Check guide rail cleanliness, remove accumulated water; applying dedicated window lubricant to tracks usually resolves it. Persistent noise may indicate motor or rail design issues – visit a specialist shop to inspect installation precision if needed. Regular maintenance extends system lifespan and ensures smooth operation. While not a major fault, timely attention prevents escalation.

Was this review help?
11
2
Share
Expand All
More Forum Discussions

What is the reason why the Haval smart key can unlock the door but cannot start the car?

Haval smart key can unlock the door but cannot start the car may be due to the key running out of battery or the key being interfered with. Introduction to Haval: Haval is a sub-brand of Great Wall Motors, established on March 29, 2013. The Haval brand, mainly focusing on SUV models, operates in parallel with the Great Wall brand, using an independent logo and an independent system for product development, production, and services, mainly engaged in SUV production and sales. The brand includes three series: H series, M series, and F series. Smart key functions: When approaching the car. When the driver brings the key in their pocket close to the car, the key and the car begin to exchange preset instructions via radio. The car's locking system, security system, and engine control system are all activated; When opening the door. As soon as the driver touches the door handle, the sensor detects this pressure, and the servo motor unlocks the door. Then the seat, steering wheel, and exterior rearview mirror automatically adjust to the position suitable for the owner; Before starting. When the driver steps on the brake pedal, the steering wheel lock is immediately released. At the same time, the start button is also released, and finally, the main brake is automatically released; When getting off the car. When getting off, the driver must press the lock button. If the flashing light turns on, it indicates that the door is securely locked. At the same time as the car is locked, the key and the car will agree on a new instruction information.
16
1
Share

What does the BMW X1 triangle exclamation mark warning light indicate?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, meaning there is a transmission issue or the transmission fluid is below the normal range. The transmission fluid should be replaced promptly. Brake system fault: A circle with an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents a tire pressure monitoring warning light. This light turns on when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is a lighting fault indicator, indicating a malfunction in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
20
5
Share

What does 4WD mean in a car?

4WD stands for "Four-Wheel Drive," which means all four wheels have driving force. 4WD includes three forms: full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive. In the early years, four-wheel drive was mainly used in hardcore off-road vehicles, but now it is also used in urban SUVs, as well as many mid-to-high-end sedans and luxury sports cars. Below is an introduction to full-time four-wheel drive, part-time four-wheel drive, and on-demand four-wheel drive: 1. Full-time four-wheel drive: Cars equipped with a full-time four-wheel-drive system are always in four-wheel drive. This system is commonly found in some luxury SUV models. 2. Part-time four-wheel drive: This four-wheel-drive system allows switching between four-wheel drive and two-wheel drive via a switch inside the car. Most off-road vehicles with part-time four-wheel drive have a low-range four-wheel-drive function. When switched to low-range four-wheel drive, the torque on the wheels is further amplified, helping the car escape difficult situations. 3. On-demand four-wheel drive: This four-wheel-drive system is generally used in some urban SUV models or some front-engine cars. Cars equipped with an on-demand four-wheel-drive system usually operate in front-wheel drive, and power is only distributed to the rear wheels when the front wheels slip or during full acceleration. On-demand four-wheel drive has lower costs and fuel consumption, making it suitable for use in some urban SUVs and sedans.
16
4
Share

Is it necessary to open the car hood for cooling in summer?

It is not necessary. When the engine is in a hot state, never open the radiator cap, otherwise you may be scalded by splashing coolant or high-temperature steam. Here is some relevant information about the engine: 1. Engine function: The car engine is the device that provides power for the car, serving as the heart of the vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. 2. Materials used: Engine oil is a crucial material for the engine, containing various additives that effectively protect the engine's important moving parts and ensure its normal operation.
18
4
Share

How to Adjust the Seat for Subject Two Driving Test?

Here are the tips for adjusting the seat in Subject Two Driving Test: 1. Front and Rear Adjustment: When your foot fully depresses the brake pedal, there should still be a slight bend in your leg. This is the ideal front and rear position for the seat. 2. Height Adjustment: Adjust the seat height so that there is at least a fist's distance between your head and the car roof. If the seat is too high, your head may hit the roof when the car bumps, affecting driving. 3. Headrest Adjustment: The optimal position for the headrest is when the centerline of the headrest aligns with your eyebrows. 4. Seatbelt Adjustment: The seatbelt should rest on your shoulder blade, not too close to your neck. For men driving, remember to place the tie outside the seatbelt. 5. Lumbar Support Adjustment: Adjust the seat to support your lower back. When leaning back, ensure your lower back is not left unsupported to reduce driving fatigue. If the seat lacks lumbar support, consider using a small cushion behind your back. 6. Rearview Mirror Adjustment: For the side mirrors, adjust them so that two-thirds of the mirror shows the ground and one-third shows the sky. This is the best vertical position. Horizontally, the car body should be slightly visible in the mirror, just enough to monitor nearby conditions. For the interior rearview mirror, it's best to see the entire following car when there is one. If not possible, prioritize the ground view. A convex mirror is ideal for the interior rearview mirror as it provides a wider field of view, making it easier to monitor the rear of the car. 7. Steering Wheel Usage: With your back firmly against the seat, your wrist should rest on the steering wheel when your arms are fully extended. This is the optimal distance. The steering wheel spokes should not obstruct the view of the dashboard displays like speed, mileage, and fuel consumption, ensuring the best position.
17
1
Share

What to Do If the Engine Oil Pan Cracks?

If the engine oil pan cracks, it is necessary to replace it with a new one. The following situations can also cause oil leakage from the engine oil pan: 1. If the drain plug is damaged, it needs to be replaced with a new one. 2. If the oil pan gasket is damaged, a new gasket must be installed. Below is relevant information about engine oil: 1. Engine oil not only lubricates the engine but also cleans, seals, cushions, prevents rust, and dissipates heat. 2. When the engine is running, the engine oil forms a thin film on the surfaces of various components inside the engine, preventing direct contact and friction between these parts.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.