Why does the new car have difficulty accelerating and jerking?

1 Answers
MacKimberly
07/29/25 12:03pm
New car having difficulty accelerating and jerking may be caused by the following reasons: 1. Clutch slipping. When you step hard on the accelerator, the engine speed rises quickly, but the vehicle speed does not increase accordingly, and you can clearly feel a state of weak acceleration. 2. Poor quality fuel used can affect the gasoline filter and fuel lines, leading to poor fuel supply and resulting in weak acceleration. 3. Carbon deposits accumulated on the throttle valve can affect the air intake, leading to insufficient engine power and weak acceleration when stepping on the gas. 4. Issues with the filter. Regularly clean the fuel filter to prevent excessive impurities in the fuel from clogging the fuel injectors. 5. The car has a small displacement and is carrying too much weight. If this is the case, it is a normal phenomenon.
Was this review help?
19
4
Share
More Forum Discussions

What Causes Engine Valve Noise?

Reasons for engine valve noise: 1. Excessive wear of components or faulty clearance adjustment; 2. Crankcase fluid level being too high or too low, affecting engine oil pressure; 3. Damaged hydraulic lifters where internal oil pressure release is too fast, causing abnormal valve opening/closing - this requires disassembly and replacement of engine hydraulic lifters; 4. Dirty valve lifters, typically requiring engine cleaning as there are usually no other contamination sources in the engine besides mechanical failures - with oil sludge being the main culprit, so valve noise caused by dirty lifters requires engine disassembly for inspection.
3
1
Share

How to Replace the Antifreeze in Tiguan?

Tiguan antifreeze replacement method: 1. Open the car hood after the engine has cooled down; 2. Unscrew the drain plug at the bottom of the radiator to empty the antifreeze; 3. Keep the vehicle idling while continuously adding clean water to the antifreeze reservoir; 4. After the water stops dripping, tighten the drain valve and turn off the engine; 5. Pour new antifreeze into the reservoir; 6. Start the engine to expel air from the cooling system pipes, the antifreeze level will drop; 7. Once the level stabilizes, top up the antifreeze between the MIN and MAX marks to complete the replacement.
3
2
Share

How to open the hood of Honda CR-V?

To open the hood of the Honda CR-V, follow these steps: In the driver's position, there are two switches—one for opening the fuel tank and another for the front hood. Pull the front hood switch, then go to the front of the car where you'll notice the hood slightly raised with a gap. Insert your hand into the gap to locate the release mechanism, and apply a little force to open it. The Honda CR-V measures 4621mm in length, 1855mm in width, and 1679mm in height, with a wheelbase of 2661mm. It is a 5-door, 5-seater SUV with a 6-speed manual transmission, front-wheel drive, and electric power steering.
16
2
Share

What engine is used in the BAIC Senova X35?

BAIC Senova X35 uses the A151 1.5L engine. Although this engine is domestically produced, its core technology originates from Japan. Taking the 2016 BAIC Senova X35 as an example: the dimensions of this car are 4300mm in length, 1815mm in width, and 1640mm in height, with a wheelbase of 2570mm. The front suspension of this car is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116ps, a maximum torque of 148Nm, and a maximum power of 85kW. It is paired with a 4-speed automatic transmission.
18
0
Share

Should the Electronic Parking Brake Be Engaged When Turning Off the Engine?

It is necessary to engage the electronic parking brake when turning off the engine to prevent the vehicle from rolling and ensure safety. Most electronic parking brakes are automatically engaged after the engine is turned off and the ignition switch is closed, but some vehicles require manual engagement or unlocking. The electronic parking brake is a technology that achieves parking braking through electronic control. The basic parking function of the electronic parking brake has been extended to include the automatic parking function AUTOHOLD. The application of AUTOHOLD automatic parking technology allows drivers to avoid prolonged braking when the vehicle is stationary. With the automatic electronic parking brake activated, unnecessary sliding of the vehicle can be prevented.
7
1
Share

How to adjust the headlights of Wuling Hongguang?

Wuling Hongguang headlight adjustment method: Open the hood, locate the two adjustment screws near the headlights, one for adjusting height and the other for adjusting left-right alignment. Car headlights can enhance driving safety during nighttime or adverse weather conditions. The Wuling Hongguang is a microvan produced by SAIC-GM-Wuling, with a wheelbase of 2720mm. It is equipped with a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine, paired with a 5-speed manual transmission and a 6-speed manual transmission. The drivetrain configuration is front-engine, rear-wheel drive, and the suspension system features MacPherson strut independent front suspension and leaf spring non-independent rear suspension.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.