Why does the Magotan mechatronic unit fail?

What are the performance characteristics of brake fluid?

The performance of brake fluid lies in its ability to ensure vehicle braking safety and provide excellent corrosion resistance. Introduction to brake fluid: Brake fluid is a high-concentration liquid with strong water absorption capacity. After being used for a period of time, its water content gradually increases. Brake fluid should be replaced every 2 years or every 40,000 kilometers driven. Alternatively, professional instruments can be used to measure the water content of the brake fluid. If it exceeds 5%, it should be replaced as soon as possible, otherwise it may affect driving safety. Precautions for brake fluid replacement: During the brake fluid replacement process, if air enters the oil pipe, the brakes may feel softer after replacement, potentially causing delayed braking or even brake failure. The complete drainage method can be used to replace brake fluid: open the bleeder valve of the brake caliper, start the engine, and repeatedly press the brake pedal until no oil comes out of the bleeder valve, then tighten it. Add new fluid to the reservoir, repeatedly press the brake pedal until firmness is felt, then loosen the caliper bleeder valve to drain fluid. When the pedal lowers, quickly tighten the valve. Repeat this process twice until no air bubbles emerge from the discharged fluid. Always check the fluid level in the reservoir to ensure it doesn't drop below the minimum mark.

8

1

Share

What suspension does the Eado NEV use?

The Eado NEV uses a MacPherson independent suspension for the front and a multi-link independent suspension for the rear. The multi-link suspension is an improvement based on the double-wishbone suspension, where the two wishbones of the double-wishbone suspension are replaced by four separate links. Some multi-link suspensions have five links, with the fifth link used to adjust wheel parameters. The MacPherson suspension is a widely used independent suspension with a relatively simple structure and compact space requirements. The Eado is a global strategic model developed by Changan Automobile's global R&D team over three years, representing an internationally advanced mid-size sedan with all-time global appeal.

10

4

Share

Can Sun Exposure Remove Formaldehyde from a New Car?

Formaldehyde requires good ventilation. Simply exposing the car to sunlight will raise the temperature, potentially worsening the release of gases. Sun exposure should be done in conjunction with proper ventilation. Additionally, bamboo charcoal is highly effective in removing formaldehyde. Its porous structure, composed of fine and dense molecular pores with a hard texture, provides strong adsorption capabilities. It can purify air, eliminate odors, absorb moisture, prevent mold, inhibit bacteria, and repel insects. When in contact with the human body, it can absorb sweat and moisture, promote blood circulation and metabolism, and alleviate fatigue. After scientific refinement and processing, it is widely used in daily life. Benefits of Bamboo Charcoal: Due to its countless pores, bamboo charcoal effectively adsorbs certain airborne particles, including harmful chemicals such as sulfides, hydrides, methanol, benzene, and phenol, thereby decomposing odors and neutralizing smells. Its tiny pores can absorb ethylene gas produced by food in refrigerators or ammonia odors from spoiled fish and meat, helping to maintain the freshness of produce and seafood. Placing charcoal in the refrigerator can eliminate food odors and keep items fresh; it can also be placed in rice containers to prevent pests and maintain dryness, ensuring rice quality. In cabinets, drawers, or pianos, it helps dehumidify, prevent mold, and remove odors. When used in cars, it can eliminate odors from leather, rubber, engine oil, formaldehyde, and more.

13

3

Share

What Causes a Significant Power Drop When Turning on the Car Air Conditioning?

When the car's air conditioning is turned on, there is a noticeable power drop because the car's maximum power is around 100 kW, while its usual power output is only 20 kW to 30 kW. When the car is moving at a constant speed, suddenly turning on the air conditioning diverts some of the engine's power, making the car feel sluggish. The impact of turning on the air conditioning is particularly significant for small-displacement cars. The car's power output directly affects driving performance when the air conditioning is on. If the car's engine has higher power and displacement, the perceived power loss due to the air conditioning is less noticeable. Conversely, if the engine has lower power and displacement, the perceived resistance is greater. Tips for Using Car Air Conditioning: After starting the car, avoid turning on the air conditioning immediately. It is best to wait for a while before activating it. When the engine is cold, turning on the air conditioning increases the engine's load, which not only consumes more fuel but can also damage the engine. After turning on the air conditioning, it is advisable to open the windows immediately for ventilation before closing them. In summer, the temperature inside a closed car cabin can reach 60–70 degrees Celsius. High temperatures can cause interior materials to release toxic and harmful gases, so it is essential to ventilate the cabin before closing the windows and driving.

13

5

Share

What is the REM wire in audio systems?

REM in audio systems refers to the speaker control wire, which is connected to the position where the car ignition key is turned on. Here are the details about REM: Installation in cars: Connect REM to the car key, 12V directly to the positive terminal of the battery, and GND to the negative terminal of the battery. Alternatively, GND can be connected directly to the car's chassis. This way, the audio system will automatically turn on when the car starts and turn off when the engine is shut down. Installation at home: A 12V-5A transformer is required. "REM 12V to +GND" is a terminal marking specific to car audio systems. REM is primarily used to control the startup and shutdown of the audio system and is generally a wire connected from the audio host.

11

0

Share

What is the tire size of the Ford Kuga?

The tire size of the Ford Kuga is 235/50R18, with a tire width of 235mm, tire thickness of 118mm, aspect ratio of 50%, and wheel diameter of 18 inches. The original tires used by the Ford Kuga are Goodyear and Maxxis, with Michelin used in special circumstances. The Ford Kuga performs better with Michelin tires or Primacy 3ST tires. The Ford Kuga is an SUV under the Ford brand. On April 22, 2012, the all-new Ford Kuga made its Asian debut at the 2012 Beijing International Auto Show. Dubbed by Ford as the 'Smarter SUV', it features a luxurious and stylish exterior, a highly modern interior, and numerous high-tech configurations leading in its class.

15

4

Share

Why does the Magotan mechatronic unit fail?

What are the performance characteristics of brake fluid?

What suspension does the Eado NEV use?

Can Sun Exposure Remove Formaldehyde from a New Car?

What Causes a Significant Power Drop When Turning on the Car Air Conditioning?

What is the REM wire in audio systems?

What is the tire size of the Ford Kuga?

Can 114 be used to inquire about car owner's phone number?

Is It Necessary to Install Sealing Strips on a New Car?

Which direction do the wheels turn when steering left?

What does the 'W' on the license plate represent?