Why does the Magotan flash when in D gear but not moving?

1 Answers
AsherMarie
07/30/25 3:39am
Possible causes include power supply, grounding, sensor or wiring faults in the transmission control unit; faults in the transmission control unit itself; mechanical faults in the transmission or issues with the ATF. The gear indicator light keeps flashing: Using VAS6150A to detect the engine, braking, parking brake, and instrument control systems, all stored the fault code "49409, no communication with the transmission control unit." Based on the fault symptoms and code analysis, it further confirms that the issue lies with the transmission. Volkswagen Magotan: The Volkswagen Magotan originates from the Future B6, closely related to the Passat B6, and is the first B-class sedan to be produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, "Ma" symbolizes confidence, decisiveness, and dynamism; "Teng" represents soaring, surpassing, and passion.
Was this review help?
10
2
Share
More Forum Discussions

How Long Does It Take for an Engine to Be Damaged by Adding Saltwater to the Fuel Tank?

Thousands of kilometers later, the engine will be completely ruined. Salt has severe corrosive effects on bearings and piston rings, while sugar dissolves in the engine oil, increasing its viscosity, reducing lubrication, and causing damage to moving parts such as bearings and pistons. It is necessary to drain the oil immediately, flush the engine interior once, and then replace it with new oil. If the duration is short, the damage will not be significant. Below is some related information about water entering the engine: 1. Significant water ingress into the engine: If a considerable amount of water enters the engine but does not affect normal driving, though the noise is louder, it may indicate a small amount of water in the oil or fuel, requiring an oil change and cleaning of related engine components. 2. Reasons for a car stalling in water: Water entering the distributor cap can disrupt normal ignition function, while water in the engine's air filter increases intake resistance and leads to water entering the combustion chamber, preventing the spark plugs from igniting. Restarting the engine under these conditions can easily cause a hydro lock.
7
5
Share

Why can't the Ford Focus trunk be opened?

The main reasons why the Ford Focus trunk cannot be opened are: 1. Problems with the linkage rod or lock cylinder; 2. The trunk is frozen or stuck; 3. The trunk is not unlocked; 4. The trunk itself has problems, etc. Additional information: 1. When the trunk cannot be opened, you can lift the rear seat, enter the trunk, open the interior panel, and manually pull the unlocking lever to unlock it. 2. The trunk capacity of the Ford Focus hatchback is 356L, while the sedan version has a trunk capacity of 530L. 3. The Ford Focus is an A-segment family car under the Ford brand. The Focus continues Ford's kinetic design philosophy, with the chrome metal trim in front of the hood being the latest design approach of the Ford family, not only fully showcasing the Focus's dynamic and stylish appearance but also continuing the distinctive brand characteristics of the Ford family. The changes to the large-mouth grille make the front face of the Focus look more impactful, and the newly designed headlights give the Focus a very aggressive appearance.
8
5
Share

What is the meaning of wheel rim?

Wheel rim, commonly known as wheel ring, is the component installed around the wheel to support and mount the tire, forming the wheel together with the wheel spokes. The wheel rim and spokes can be integral, permanently connected, or detachable. The wheel hub is the rotating component that connects the wheel and axle, responsible for bearing the load between the tire and axle. The classification of automobile wheel rims is as follows: 1. Deep well rim: This type of rim is integral, with a deep groove in the middle of its cross-section. It has a flanged shoulder for mounting the tire bead, with the shoulder usually slightly inclined towards the center at an angle of 4 to 6 degrees. The maximum diameter of the inclined part is called the tire bead seat diameter. The deep groove in the middle of the cross-section facilitates the mounting and dismounting of the tire; 2. Flat base rim: There are many structural forms of this type of rim. The retaining ring is integral, and an open elastic lock ring is used to prevent the retaining ring from coming off; 3. Split rim: This type of rim consists of inner and outer parts. The width of the inner and outer rims can be equal or unequal, and they are bolted together. When mounting or dismounting the tire, only the nuts need to be removed. The inner rim is made with an integral flange to replace the function of the retaining ring, and the inner rim is welded to the wheel disc.
13
3
Share

Can I Renew My Driver's License If I Fail the Color Blindness Test During the Physical Examination?

If you fail the color blindness test during the physical examination for renewing your driver's license, you cannot renew your license. Failing the color blindness test indicates that the driver's physical condition is no longer suitable for operating a motor vehicle, and the driver should voluntarily give up their license. If not, the license will be revoked by the vehicle management office. The physical examination for driver's license renewal includes the following items: 1. Height: No restrictions; 2. Vision: The naked or corrected vision of both eyes must reach at least 4.9 on the logarithmic visual acuity chart (equivalent to 0.8 on the E-chart); 3. Color vision: No red-green color blindness; 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 centimeters from a tuning fork; 5. Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact, with normal limb and finger movement functions; 6. Lower limbs: Normal movement function, with a length difference of no more than 5 centimeters; 7. Trunk and neck: No movement dysfunction.
14
3
Share

Why won't the 2017 Lavida start with one-button ignition?

Volkswagen Lavida's one-button start failure may be caused by a depleted smart key battery. When the vehicle's smart key runs out of power, the key's transmission power becomes very low, making it difficult for the onboard sensor to detect it, rendering the one-button start function unusable. Here are additional details: 1. Powertrain: The 1.6L naturally aspirated engine paired with a 6-speed automatic transmission delivers maximum power of 81kW and peak torque of 155N·m, achieving 0-100km/h in 12.3 seconds. It performs adequately for daily steady driving. Overtaking isn't particularly strenuous when accelerating aggressively. 2. Chassis: The suspension features front MacPherson struts and rear torsion beam setup, tuned with subtle German characteristics - delivering crisp vibration filtration, solid support, and precise handling with minimal body roll during cornering, offering a stable and substantial driving feel. 3. Space: With a 2610mm wheelbase, the Lavida offers rear legroom of one fist plus four fingers and headroom of two fingers. The 478-liter trunk provides ample capacity for both cargo and passengers, making it exceptionally well-suited for family use.
10
2
Share

What to Do When the Engine Fault Light Comes On After an Oil Change?

Changing the oil is just a routine maintenance task and is not directly related to the engine fault light coming on. The main reason for the engine fault light illuminating is poor engine combustion conditions. Special cleaning agents can be used to remove carbon deposits, and high-quality fuel additives can be employed to clean the entire fuel system. More details are as follows: 1. The engine fault light (also known as the MIL light) comes on when components monitoring vehicle exhaust emissions fail, and the On-Board Diagnostics (OBD) system detects excessive emissions. Examples include the ignition coil, spark plugs, catalytic converter, exhaust valve, fuel injectors, intake pressure sensor, oxygen sensor, etc. 2. After the engine fault light comes on, there may be some abnormal conditions. If not addressed promptly, it can lead to issues such as increased combustion chamber temperature and accelerated wear, potentially causing premature engine damage. Engine noise may increase, affecting driving and passenger comfort. Fuel consumption may rise, wasting petroleum and financial resources. The engine may burn oil. Vehicle exhaust quality may deteriorate, polluting the environment. To maintain the engine in good working condition, car owners can opt for high-quality gasoline, which usually resolves the issue of the engine fault light coming on.
4
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.