Why does the Langdong's car display screen not show but can still play?

1 Answers
Millard
07/23/25 11:33pm
Langdong's car display screen not showing but still being able to play is due to poor line contact. It is necessary to promptly check the wiring and the installation connection points of the entire vehicle to see if there is any loose connection. Abnormal imaging of the reversing camera: At this time, simply ensuring a proper connection will suffice. If the video power cord has aged, you can try replacing it with a new one. After checking, the reversing camera still shows a black screen: The reversing camera has been used for too long, leading to poor chip photosensitivity, and even causing a lot of snowflake-like interference. It needs to be checked and repaired at a maintenance shop or directly replaced.
Was this review help?
4
3
Share
More Forum Discussions

Where is the headphone jack on the Geely Vision?

The Geely Vision does not have a headphone jack. You can only connect your phone to the car's system via Bluetooth or use a USB flash drive connected to the USB port. Location of the USB port on the Geely Vision: The Geely Vision has one USB port on each side below the center control screen. These are vehicle transmission cables with advantages such as fast transmission speed, ease of use, support for hot swapping, flexible connection, and independent power supply. They are generally universal interfaces for USB devices like flash drives and MP3 players. Reasons why the car USB may not read the flash drive: Loose flash drive: Since the flash drive is plugged into the vehicle's USB port for extended periods during use, the vibration and shaking of the vehicle while driving can easily cause it to become loose. Damaged flash drive: Due to the less-than-ideal environment inside the car (especially during high temperatures in summer), there is a possibility of damage. Damaged USB port: If none of the above issues are present, the possibility of a damaged USB port cannot be ruled out.
20
2
Share

Where is the cruise control on the Haval H7?

The cruise control for the Haval H7 is located on the steering wheel. The cruise control is usually positioned near the steering wheel and comes in three main types: lever-style, steering wheel button-style, and steering wheel control group-style. How to use the cruise control on the Haval H7: Press CRUISE to activate cruise control. Briefly press the adjustment button toward RES+ or SET- once to increase or decrease the set cruise speed by 1 km/h. Press the button briefly toward SET- to set the current speed as the cruise speed. The main functions of the cruise control include: "SET" (set speed), "— or COAST" (reduce set speed), "RES" (resume set speed), "+ or ACCEL" (increase speed), "CANCEL" (cancel or deactivate set speed), and "ON/OFF or CRUISE" (cruise control master switch). How to activate cruise control on the Haval H7: Press the control switch to put the cruise control on standby, accelerate to the desired speed, and then push the control lever downward to set the cruise speed. To accelerate, push the control lever upward or press the accelerator. To cancel cruise control, pull the control lever upward, turn off the cruise control master switch, press the accelerator pedal, or lightly tap the brake.
19
1
Share

Can a Car with a Mortgage Be Transferred?

A mortgaged car cannot be transferred. If a car has been mortgaged, it means the ownership rights of the car temporarily do not belong to the owner. Therefore, the owner does not have the right to transfer the car, which is not temporarily theirs, to someone else. The mortgage must be fully repaid, and the mortgage must be lifted to confirm ownership before the transfer can be processed. Below is relevant information about choosing a mortgaged car: 1. Source of the Mortgaged Car: First, ensure the mortgaged car comes from a legal and legitimate source, as this is fundamental to protecting your interests. If the car is stolen or otherwise illegal, it could cause significant financial loss. 2. Documentation of the Mortgaged Car: This includes the car's age, vehicle registration certificate, etc. Additionally, the seller should provide copies of the owner's ID and other relevant documents. The buyer should verify these documents to ensure their authenticity, which can greatly reduce risks. 3. Type of Mortgage: It is important to distinguish whether the car is mortgaged through a bank installment loan or to a lending institution, as the two methods differ. If the owner sells the car before repaying the bank loan, do not purchase it, because if they fail to make timely repayments, the bank has the right to apply for the car to be auctioned, causing significant financial loss to the buyer.
16
2
Share

What Causes the Audi A6 C6 to Shake When Accelerating to 3000 RPM?

Audi A6 shaking when accelerating to 3000 RPM can be attributed to the following reasons: Damaged Spark Plugs: The most common issue causing shaking during acceleration is damaged spark plugs. Worn electrode gaps in spark plugs can lead to insufficient ignition, resulting in incomplete combustion of the air-fuel mixture and causing shaking during acceleration. Additionally, cracks in the ceramic part of the spark plug can prevent it from firing, causing one cylinder to stop working, which also leads to shaking during acceleration. Poor Fuel Quality: Low-quality gasoline can result in poor atomization by the fuel injectors, leading to incomplete combustion of the air-fuel mixture in the cylinders and causing shaking during acceleration. It is recommended to use higher-grade gasoline after finishing the current tank and perform a fuel system cleaning. Excessive Carbon Buildup: A dirty throttle body or excessive carbon buildup in the fuel injectors can cause the throttle to not close properly or the idle control motor to stick, both of which can result in high engine idle. Carbon deposits generated during engine operation can also cause vehicle shaking, especially when starting the engine, where it may shake more than usual or even fail to start on the first try. Therefore, when experiencing shaking, the throttle body and fuel injectors should be inspected first. If they are found to be dirty or have excessive carbon buildup, they should be cleaned promptly.
13
3
Share

Is the MG3 Suitable for Modification?

The MG3 can be modified, but for extensive modifications, they need to be registered and approved by the relevant authorities. The size of the tires and wheels should not be changed, and the wheel design should not be overly exaggerated. Increasing or decreasing the size may affect the vehicle's original balance. MG3 Exterior: It features the 'FacetedFlow' artistic design with fluid surfaces, complemented by the dazzling MG octagonal badge, a visually striking tiger-like front grille, smoked eagle-eye headlights, and the innovative Myway custom roof decal. Performance Parameters: The car is equipped with two energy-efficient engine options: 1.3L and 1.5L. It comes with the third-generation e-Shift automated manual transmission produced by Magneti Marelli, as well as a traditional 5-speed manual transmission. The 1.5L high-efficiency VTi engine offers advantages such as high torque at low speeds, delivering a maximum output of 80 kW and a peak torque of 135 Nm. Paired with the 5-speed manual transmission, it achieves a 0-100 km/h acceleration time of just 11.5 seconds. The third-generation e-Shift automated manual transmission provides ultra-smooth and efficient performance, making it an ideal powertrain combination for compact cars.
18
5
Share

What are the symptoms of a broken rear shock absorber?

When the vehicle's shock absorber system is damaged, the most intuitive feeling is that the vehicle's bouncing and shaking are significantly increased, and there will also be some abnormal noises from the chassis. Below is the relevant introduction to the shock absorber system: 1. Structure of the shock absorber system: The shock absorber system consists of springs and shock absorber tubes, with shock absorber oil inside the tubes. Over time, the shock absorber tubes may develop oil leaks, and the elasticity of the springs may decrease after prolonged use. 2. Impact of shock absorber system damage: Shock absorbers and springs are wear-prone parts of the vehicle, and the shock absorber system directly determines the driving feel and chassis performance of the vehicle. If the shock absorber system is damaged, it is recommended to replace it promptly; otherwise, it will severely affect the driving feel. After the shock absorber system is damaged, the chassis will produce many abnormal noises, especially when passing over speed bumps or rough roads, the noise from the chassis will be louder. When replacing the shock absorber system, it is recommended to choose original equipment manufacturer (OEM) parts. If OEM parts are not available, you can opt for parts produced by well-known brands. 3. Replacement precautions: When replacing the shock absorber system, it is necessary to find a professional shop for installation, and some debugging is required after the installation is completed.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.