Why Does the Inner Side of the Tire Wear Severely?

1 Answers
McJoseph
07/25/25 9:20am
Tire inner side severe wear reasons: 1. Incorrect toe adjustment: Toe refers to the slight inward tilt angle of the front wheels, similar to pigeon-toed. All vehicles have their own toe angle, and improper adjustment of this angle can also cause wear; 2. Long-term over-inflation or under-inflation of tires: Both over-inflation and under-inflation can lead to uneven contact between the tire and the ground, resulting in severe tire wear; 3. Inaccurate wheel alignment: If the four tires are not aligned on the standard horizontal and vertical lines, the two wheels on the same side may experience uneven tire wear when driving, or the front or rear wheels may not run straight. The vehicle will self-correct, causing abnormal increase in friction on a certain part of a tire, accelerating wear.
Was this review help?
16
4
Share
More Forum Discussions

Where is the anti-theft screw located on the Volkswagen Sagitar?

The anti-theft screw on the Volkswagen Sagitar is located under the trunk mat. Pull open the inner handle to see it. Features of the anti-theft screw: The structure is simple and innovative, with standard bolts for user convenience, eliminating the need for an additional fastening nut, integrating fastening and anti-theft functions; it is the first domestic application of the "reverse locking" principle, making the anti-theft performance unique and reliable. Additionally, it is fully protected by an anti-theft steel sleeve, leaving thieves with no way to tamper; it prevents loosening, self-locks, and has a wide range of applications, allowing for reinstallation on old lines; installation and use are convenient, requiring no special tools, and adjustment is easy, solving the problem of existing anti-theft nuts being difficult to re-tighten. Introduction to tire anti-theft screws: The anti-theft principle of tire anti-theft screws involves machining the outer diameter of the screw into an irregular shape, requiring the use of a specialized removal tool that matches the wheel to remove it.
18
4
Share

What are the features of the Enclave?

Enclave features are as follows: Electronic Stability Program (ESP): Can be manually turned off in conditions like rain, snow, or muddy roads. Normally, it should be turned on to prevent skidding or fishtailing. Parking Radar/Image: The central display shows the rearview image, and the radar will sound an alarm when detecting nearby obstacles. Auto Start-Stop: At traffic lights, the engine is briefly turned off. When the driver's foot leaves the brake pedal, the vehicle will restart. Recirculation/Fresh Air Mode: Recirculation mode means the air inside the car is circulated in a closed loop, while fresh air mode exchanges air inside and outside the car. Use recirculation mode in environments with heavy exhaust, dust, or smog, such as during traffic jams. On highways, switch from recirculation to fresh air mode periodically, and avoid using recirculation mode for more than one hour at a time.
5
5
Share

Where is the electronic power steering of the new Alto located?

The electronic power steering of the new Alto is located on the steering column below the steering wheel, along with a torque sensor and control computer. Principle of electro-hydraulic power steering: The principle of electro-hydraulic power steering is basically the same as that of mechanical hydraulic power steering, except that the oil pump is driven by an electric motor, and the steering assistance force is variable. The vehicle speed sensor monitors the speed, and after obtaining the data, the electronic control unit adjusts the opening degree of the steering control valve to change the hydraulic pressure, thereby regulating the steering assistance force. Advantages of electro-hydraulic power steering: Electro-hydraulic power steering retains most of the advantages of mechanical hydraulic power steering while also reducing energy consumption, offering more responsive reactions, and allowing the steering assistance force to adjust automatically based on parameters such as steering angle and vehicle speed, making it more user-friendly. However, the introduction of many electronic components increases manufacturing and maintenance costs, and its operational stability is not as reliable as that of mechanical hydraulic systems. With continuous technological advancements, these drawbacks are gradually being overcome, and electro-hydraulic power steering has become the choice for many household car models.
9
5
Share

What is the difference between filling up to the gun click and filling up completely?

The differences between filling up to the gun click and filling up completely are the remaining space, the burden level, and the process. Details are as follows: Remaining space is different: Filling up the car's fuel tank completely means there is no remaining space in the tank, while filling up to the gun click indicates that there is still some space left in the tank, and it is not completely full. Burden level is different: Clicking the gun actually protects the car's safety performance to some extent and has no impact on the car. However, filling up the tank is different. When the tank is full, it can easily cause the vent hole to become blocked. If exposed to an open flame, the car may be at risk of burning, which to some extent indicates that filling up the tank imposes a greater burden. The fueling process is different: Filling up the car's fuel tank completely is a complete process, while filling up to the gun click is not a complete process and can be divided into several stages. For example, the first gun click, the second gun click, and the third gun click. However, it is generally not recommended to proceed to the third gun click, as this situation is not conducive to the car's safety. The principle of the fuel gun clicking: Simply put, it is accomplished through a self-sealing mechanism. When the fuel level in the tank is insufficient, the air vent of the fuel gun is not blocked, and the gun dispenses fuel normally. When the fuel level in the tank is full, the air vent of the fuel gun becomes blocked, creating negative pressure inside the gun's self-control membrane. This, in turn, drives the ball and switch to disengage the gun's support plate, thereby closing the valve and causing the gun to self-seal.
16
4
Share

What are the differences between Audi S3, S4, and S5?

Audi S3, S4, and S5 have the following differences: S5: In terms of body dimensions, the S5 is longer, wider, and flatter, giving it more of a coupe feel. For tire sizes: the S4 has 245/35ZR19 tire specifications, while the S5 has 255/35ZR15 dimensions. The S5 comes with a panoramic sunroof. S4: The S4 has a manual small sunroof. The S4 has framed doors, while the S5 has frameless doors. The S4's trunk sensor is unidirectional, whereas the S5's trunk sensor is bidirectional. The S5 offers optional electronic damping, among other features. S3: Equipped with a 2.0T engine, the S3 delivers a maximum output power of 231 kW (314 PS), a maximum torque of 380 Nm, a top speed of 250 km/h, and a 0-100 km/h acceleration time of 4.8 seconds. In terms of body dimensions, the new car measures 4474 × 1796 × 1392 mm (length × width × height).
11
3
Share

What Causes the Peugeot 307's Brakes to Become Hard?

The reason the Peugeot 307's brakes become hard is due to the presence of ABS, which is a normal phenomenon. Below is an introduction to the Peugeot 307: 1. Overview: The Dongfeng Peugeot 307 is an elegant and highly distinctive car. Its front face resembles the majestic look of a lion, with the two headlights shining like the lion's eyes, exuding authority without anger—a characteristic shared across the Peugeot series. 2. Exterior: From the side, the car is highly distinctive, with smooth and harmonious overall lines. The front fender flows seamlessly into the upper body, while the curved roof integrates with the rear triangular window and spoiler, naturally outlining the curved contour of the trunk. The transition between the trunk and the spoiler is smooth, with the rear lights cleverly embedded within. The overall shape is balanced and symmetrical, showcasing both strength and harmony. 3. Performance: The Dongfeng Peugeot 307 shares the same design philosophy as other models in the series, featuring a transverse-mounted engine, front-wheel drive, four-wheel independent suspension, and comprehensive active and passive safety features. Human-centric design is evident throughout.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.