Why does the indicator light stay on when the car door is closed?

1 Answers
Ellen
07/29/25 7:05pm
The reasons why the indicator light stays on when the car door is closed are: 1. Although the car is turned off, the power is still on, and the dashboard will also remain lit. In this case, simply turn off the power switch and the light switch. 2. The car is turned off, and the power is also off, but the dashboard has a standby function. After the passengers exit and close the car door, the dashboard will automatically turn off. Automobile dashboard indicator lights are divided into three categories: indicators, warnings, and faults. Indicator lights are commonly seen during normal driving, such as light signal lamps, turn signal lamps, and parking lamps, which serve to indicate the status of various vehicle functions. Warning lights have an alert function, such as fuel indicator lights, door status indicator lights, and seat belt indicator lights. Fault lights are important indicators, such as generator fault indicator lights, ABS fault indicator lights, and transmission fault indicator lights.
Was this review help?
18
2
Share
More Forum Discussions

Do I still need to go to the DMV every year for a vehicle with biennial inspection?

For vehicles with biennial inspection, you don't need to visit the DMV every year. Electronic annual inspection labels have now been implemented, eliminating the need to affix paper inspection labels on windshields. You only need to obtain an electronic inspection certificate through the traffic management 12123 platform. Below are specific details about vehicle annual inspections: Biennial application: Vehicles exempt from inspection for six years are exempt from on-site inspection, but require applying for an annual inspection compliance label every two years. To apply for the label, the owner or agent only needs to bring the required documents (vehicle license, ID card, and copy of compulsory traffic insurance) to the local DMV, or apply online. On-site processing: The owner or representative should bring documents such as ID card, motor vehicle inspection label application form, vehicle license, and copy of compulsory traffic insurance to the DMV for processing. If there are traffic violations, they need to be handled at the traffic violation processing window first.
7
0
Share

Is Shaking at 40 mph Caused by Half Shaft Damage?

Shaking at 40 mph could be caused by half shaft damage, but there are other potential factors as well. The specific reasons are as follows: Engine Misfire: An engine misfire mainly refers to one or more cylinders not functioning properly. Common symptoms include: intermittent exhaust airflow with noticeable pauses, severe shaking of the exhaust pipe, obvious engine vibration, and sometimes accompanied by sputtering sounds. This is often related to ignition coil failure. Engine Mount Deterioration: Engine mounts are rubber blocks between the engine and the frame. Their purpose is to reduce vibration and cushion the engine's operation while also securing the engine in place. Once these mounts deteriorate or become loose, engine vibration will become significantly more severe. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance of the ignition system or faulty spark plug firing can also lead to such symptoms.
19
5
Share

How to Determine the Cylinder Order of the EA837 Engine?

ea837 engine cylinder order is determined from the front of the engine, where the first cylinder on the left is cylinder number one, and so on. Below are specific details about the EA837 engine: Introduction: The EA837 series engines include two displacements: 1.8L and 2.0L. The 1.8TSI has a maximum power output of 118kw, while the 2.0TSI can reach up to 147kw. Principle: The mechanical structures of these two engine displacements are fundamentally the same. The difference lies in the length of the connecting rods between the crankshaft and pistons. The 2.0TSI has shorter connecting rods compared to the 1.8TSI, with an increased crankshaft radius to enhance displacement. Additionally, the piston top structures differ slightly, primarily to adjust the working volume of the combustion chamber, ensuring consistent compression ratios and achieving the same combustion effects.
2
2
Share

Which province does the license plate 'Hei M' belong to?

Hei M is the license plate of Suihua City, Heilongjiang Province. The license plate codes for various regions in Heilongjiang are: Hei A - Harbin, Hei B - Qiqihar, Hei C - Mudanjiang, Hei D - Jiamusi, Hei E - Daqing, Hei F - Yichun, Hei G - Jixi, Hei H - Hegang, Hei J - Shuangyashan, Hei K - Qitaihe, Hei L - Songhuajiang, Hei M - Suihua, Hei N - Heihe, Hei P - Daxing'anling, Hei R - Heilongjiang. Suihua City is located in the central-southwest part of Heilongjiang Province. It is a prefecture-level city in Heilongjiang Province, an important transportation hub, and one of the six major passenger and freight transfer centers in the province. It is also a regional central city north of Harbin.
5
5
Share

How is a car displayed when it runs out of fuel?

When a car runs out of fuel, the fuel warning light will illuminate. The methods to handle a car running out of fuel are: 1. Control the speed reasonably; 2. Reduce the load on the vehicle; 3. Do not turn on the air conditioning; 4. Close the windows to reduce wind resistance; 5. Choose good road conditions as much as possible, reduce bumps, and maintain a steady speed; 6. Drive smoothly and reduce unnecessary braking; 7. Avoid traffic congestion. The correct steps for refueling a vehicle are: 1. Slow down and drive into the gas station gradually; 2. Turn off the engine before refueling; 3. After filling up, close the fuel nozzle before starting the car; 4. Drive out of the gas station at a low speed. Precautions for vehicle refueling include: 1. Refuel in the morning or evening to avoid direct sunlight at noon; 2. Add more fresh fuel before long-distance trips; 3. Do not exceed the upper limit of the fuel tank; 4. Park, turn off the engine, and cut off the power; 5. No smoking.
2
2
Share

Can a B2 driver's license be renewed in a different location when it expires?

B2 driver's license renewal can be processed in a different location. As long as the driver's license is within its validity period, it can be renewed at the local Vehicle Management Office. Documents required for renewal: Bring two copies of ID card, two recent 1-inch color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the Vehicle Management Office). Renewal process: The driver should bring the required documents to the Vehicle Management Office where the driver's license was originally issued to apply for renewal. The Vehicle Management Office will process the renewal within one working day after verification. Renewal in a different location and other methods: In addition to applying for renewal at the Vehicle Management Office, you can also apply for renewal through the following methods: Renewal via the Traffic Management 12123 APP. Download the app, select Service Center -- Expired License Renewal Service -- fill in the information. The new license is usually delivered by mail. Go to the Postal Service's Police-Medical-Post service point for renewal. The entire process, from registration to medical examination and new license production, takes only half an hour. Currently, only a few cities have this service, such as Hangzhou.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.