Why does the idle speed not increase when the air conditioning is turned on?

2 Answers
ElainaLee
07/25/25 3:13am
If the idle speed does not increase when the air conditioning is turned on, you need to check whether there is an issue with the car's idle speed motor. If the idle speed does not increase and there is no shaking, it indicates that the car is functioning normally. In summer, when the car's air conditioning is turned on, it is normal for the idle speed to increase. If the air conditioning's cooling effect is normal, whether the idle speed increases or not has minimal impact on the car, so you can drive with peace of mind. Here are some relevant details: 1. When the air conditioning is turned on in summer, because the compressor is working, the load on the car's engine will increase accordingly, and fuel consumption will also rise. It is important to note that after starting the car, you should not immediately turn on the air conditioning. Doing so not only fails to quickly lower the temperature inside the car but can also damage the engine to some extent. 2. Running the air conditioning at idle speed also has a significant impact on the car. It not only affects the normal use of the car but can also harm human health. In fact, prolonged idling in one place causes wear and tear on the car itself and can easily lead to carbon buildup inside the engine. Using the air conditioning while idling not only adversely affects the engine's cooling system, battery system, and the entire air conditioning system but can also allow carbon monoxide to enter the car, posing health risks to the occupants.
Was this review help?
14
3
Share
VonLucia
08/10/25 4:54pm
Back when I drove my old car, the idle speed would always rise a bit with the AC on, which was normal compensation. But now with my decade-old car, there was this one time when the idle speed didn't budge at all with the AC on, and no cold air came out either, which got me worried. I checked the compressor belt - it wasn't slipping, but when I pressed the AC button, the light didn't come on. That's when I realized the circuit fuse had blown. After replacing the fuse, it worked fine again. If the compressor isn't working, there's insufficient refrigerant, or the idle control valve is stuck, similar issues could occur. When idle speed doesn't increase as it should, it's actually abnormal and can put extra strain on the engine, potentially causing stalling over time. For safety's sake, I'd recommend checking the AC switch signal and electronic control system - better to address it before it becomes a bigger problem.
Was this review help?
16
4
Share
Expand All
More Forum Discussions

How Many Years or Kilometers Until a Vehicle is Scrapped?

Non-commercial vehicles and commercial vehicles have different scrapping periods, as detailed below: Scrapping regulations for non-commercial vehicles: For household 5-seat sedans and 7-seat SUVs, non-commercial small and micro vehicles have no usage period limit. When the normal driving mileage reaches 600,000 kilometers, the state will guide the scrapping process. In addition to the above vehicles, small and micro non-commercial passenger vehicles, large non-commercial sedans, and wheeled special machinery vehicles also have no usage period limit. Common scrapping regulations for commercial vehicles: Small and micro taxi passenger vehicles have a scrapping period of 8 years, medium-sized taxi passenger vehicles have a scrapping period of 10 years, and large taxi passenger vehicles have a scrapping period of 12 years. Public transport passenger vehicles have a scrapping period of 13 years, other small and micro commercial passenger vehicles have a scrapping period of 10 years, and large and medium-sized commercial passenger vehicles have a scrapping period of 15 years. Micro commercial trucks have a scrapping period of 8 years, light and large commercial trucks have a scrapping period of 10 years. The vehicle scrapping process is as follows: The vehicle owner applying for scrapping and renewal must fill out one copy of the "Motor Vehicle Change, Transfer, Modification, Suspension, and Scrapping Approval Application Form" and affix the owner's seal. The registration office will accept the application and issue a "Vehicle Scrapping Notice" for vehicles that have reached the scrapping period. For vehicles that have not reached the scrapping period, after inspection by the motor vehicle inspection office and confirmation that they meet the scrapping standards, a "Vehicle Scrapping Notice" will be issued. The vehicle owner can choose a qualified recycling company to dismantle the vehicle with the "Notice". The recycling company will dismantle the vehicle and take photos after verifying the "Notice". The engine must be separated from the vehicle, the engine block must be broken, and the frame (chassis) must be cut. The vehicle owner must submit the "Change Form", "XX Province Vehicle Renewal Technical Appraisal Form", "Scrapped Vehicle Recycling Certificate", and photos of the dismantled vehicle to the motor vehicle inspection office for verification and signature. The license plates and certificates will be reclaimed, and the scrapping registration will be processed according to regulations. Special notes: According to Article 30 of the "Motor Vehicle Registration Regulations", if a vehicle is damaged and cannot be driven back to the place of registration, the owner can sell the scrapped vehicle to a local motor vehicle recycling company. If a commercial vehicle is converted to a non-commercial vehicle, it must be scrapped according to the original commercial vehicle's scrapping period. According to Article 43 of the "Motor Vehicle Registration Regulations", after completing the transfer or deregistration of a motor vehicle, the original owner can apply to use the original license plate number when registering a new vehicle. The application must meet the following conditions: (1) The application must be submitted within six months after the transfer or deregistration; (2) The owner must have owned the original vehicle for more than three years.
13
5
Share

Which Corolla model is the Toyota TV7121E6?

TV7121E6 is a Toyota Corolla. Here are the relevant details about the Corolla: Exterior: Balanced and dignified, stable, suitable for family use. Interior: The overall style is simple, with a conventional center console design and spacious, comfortable seats. Space: The overall space is relatively large, with ample front-row space, though the rear-row space is somewhat limited, and the storage spaces are practical and convenient. Handling: The overall driving experience is comfortable, with smooth operation, though the steering accuracy is low and the gear shifts can be jerky. Performance: The overall performance is good, with quick acceleration, though the initial pickup is slow, and the engine noise is minimal. Fuel Efficiency: High fuel economy, with overall low fuel consumption.
1
3
Share

Why Are Second-Hand MG 6 Cars So Cheap?

MG 6 has a relatively low resale value. As a compact sedan under the MG brand, currently produced and sold domestically by SAIC Motor, the five-year resale rates for the MG 6 are 63%, 55.45%, 47.72%, 42.25%, and 37.71% respectively. Here is more information about MG: Brand History: MG is a British automotive brand established in the UK. In 2005, Nanjing Automobile Group acquired the MG brand and all its technologies. In 2007, Shanghai Automotive Industry Corporation (SAIC) merged with Nanjing Automobile Group, making MG a brand under SAIC, which it remains to this day. Market Positioning: MG primarily targets young consumers in the mid-to-low-end market, with product designs following a sporty style, aligning with current mainstream trends.
11
3
Share

How to Repair a Faulty Car Cigarette Lighter?

Here are the common causes of car cigarette lighter failures and their corresponding solutions: 1. Loose connection, where the lighter cannot lock in place after being pressed, preventing it from receiving power. Solution: Use a non-conductive object like a bamboo stick to gently push the spring plate outward to restore it to its original position. 2. The cigarette lighter is faulty and cannot be used. Solution: Purchase a replacement lighter of the same type online or at a physical store. 3. Improper use causes a short circuit in the wiring, blowing the fuse. Solution: Refer to the fuse location diagram on the inside of the fuse box cover to locate the cigarette lighter fuse, use a fuse puller to remove the blown fuse, and replace it with a new one.
2
0
Share

What is the function of the Toyota push button?

Toyota push button function refers to the operation method of pressing the button. The following is a related introduction about the push button function: Representation: Usually, there will be corresponding function icons or characters next to 'push', which means that this function can be activated by pressing. If there is a push button in the middle of a knob, it indicates that the knob can be pressed in the middle, and pressing the knob can activate a certain function. Types: There are three types of car push buttons: 1. The push button in the middle of the air direction (also called mode) gear knob, pressing it turns on the light and activates the rear window defrost; 2. The push button in the middle of the temperature (also called cold/warm) gear knob, pressing it turns on the light and activates the internal circulation; 3. The push symbol is equivalent to the handbrake.
4
3
Share

How to remove the front face of a Haval H6?

To open the front hood of the Haval H6, you need to use the release switch located below the driver's side in the cabin, to the left of the brake pedal. Pull the switch to open the hood. The Haval H6 hood insulation is secured with plastic clips, which can be pried off directly by pulling them downward. Below is additional relevant information: 1. After pulling the switch, you will hear the hood release, but it will not rise automatically as there is an additional latch located in the middle of the hood. You can reach in by hand to feel the latch, which is recessed inside. Once located, lift it upward to fully open the hood. 2. When closing the hood, ensure the hydraulic struts are properly repositioned to avoid potential noise or damage to the hood during closure.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.