Why does the Honda UR-V sell less than the Guan Dao?

What are the symbols for the internal and external air circulation in the Magotan?

An upward arrow coming from outside the car indicates the external air circulation symbol; an arrow inside the car indicates the internal air circulation symbol. Below are detailed explanations of the internal and external air circulation in cars: 1. External Air Circulation: External air circulation refers to drawing air from outside the vehicle, directing it through the air conditioning system for heating or cooling, and then blowing it out through the vents. Essentially, external air circulation replenishes fresh air to improve the air quality inside the car. It should be used for defrosting in winter or defogging in summer because the air drawn from outside is richer in oxygen and drier, making it more effective for defrosting or defogging. 2. Internal Air Circulation: Internal air circulation draws air from inside the vehicle, creating a cycle of airflow within the car. Its main function is to promptly and effectively prevent external dust and harmful gases from entering the car. It helps warm up the car faster in winter and cool it down quicker when the air conditioning is on in summer. It can also be used during smoggy days. Internal air circulation maintains the internal air cycle, helping to better preserve the temperature inside the car.

13

2

Share

Is It Worth Repainting If the Hood Paint Is Chipped by a Stone?

The chipped paint on the hood needs to be touched up; otherwise, even a small damage can cause the steel plate to start rusting. By that time, even touching up the paint will hardly prevent rust. Using a touch-up pen for repainting: Car owners can first wash and dry the car, apply rust remover to the scratched area, wait 10 to 15 minutes, and then wipe off the rust remover with a tissue to prevent further rusting. When the car's hood paint is chipped by a stone, a touch-up pen can be used for repair, covering up the rice-sized mark and making it less noticeable. Although there is still a certain gap compared to the original factory paint (color difference exists), and the durability is certainly not comparable to the original factory paint, after all, the touch-up pen is only for local touch-up. Other repainting methods: When new car paint is chipped, using toothpaste for repair is very effective because toothpaste itself has a grinding function, equivalent to applying a layer of wax to the car, thus achieving a good repair effect. However, toothpaste repair can only address minor damage; it is not very effective for deeper damage. If the stone has chipped through to the primer, sheet metal and repainting treatment will be required. But this repainting project is best left to professional staff for spraying.

11

5

Share

Where is the rear panel located?

The rear panel of a car is the rear barrier of the trunk. It refers to the surrounding area below the trunk. Generally, the original rear panel is not integrated with the frame but is welded on. Introduction to the rear panel: The rear panel is part of the body covering. Replacing it will not cause significant depreciation. The rear panel is composed of several pieces rather than being a single unit. Deformation of the spare tire floor or the rear panel has minimal impact on the car, such as not affecting the vehicle's handling performance. Repair of a damaged rear panel: Therefore, if the rear panel is damaged, it is advisable to perform sheet metal repair if possible and avoid cutting. Once cutting is involved, the car is considered to have been in an accident. If the car is classified as an accident vehicle, its strength will decrease significantly after repair, and its resale value will drop considerably. If the repair involves only hammering or frame pulling without cutting or welding, it is not considered an accident vehicle. Although sheet metal repair does not classify the car as an accident vehicle and has little impact on resale, the actual situation should be analyzed. If the damage is severe, cutting repair must be performed. Once the rear panel undergoes cutting repair, it is crucial to apply sealant to the weld points to prevent rust, as the exposed welded areas are bare cast iron without paint protection and are prone to rust over time.

1

5

Share

What is the function of a car air conditioner's evaporator?

The function of the evaporator is to evaporate the low-temperature refrigerant coming from the expansion valve under low pressure, converting it into vapor and absorbing heat from the cooled medium, thereby achieving the purpose of refrigeration. Daily maintenance for it is as follows: Regularly perform leak detection on the evaporator: When an ammonia evaporator leaks, there is a pungent odor, and frost does not form at the leak point. The leak can be checked using phenolphthalein test paper because ammonia is alkaline and turns the test paper red. Visually, the area where frost does not form on the evaporator is usually the leak point, or soapy water can be used to locate the leak. Regularly check the frost condition on the evaporator: When the frost layer is too thick, it should be removed promptly. Abnormal frost formation may be due to blockage, and the cause should be identified and addressed immediately. When the evaporator is out of service for a long time: The refrigerant should be transferred to the liquid receiver or condenser, keeping the evaporator's pressure at about 0.05MPa (gauge pressure). If it is an evaporator in a brine tank, it should also be rinsed with tap water, and the tank should be filled with tap water after rinsing.

1

4

Share

What to do if the reversing camera has poor contact?

Check for any loose connections, as poor contact can cause the reversing radar to intermittently work. Sometimes faults can occur due to car washing or high-pressure water jet cleaning. Check if the reversing radar itself has any inherent defects or damage.

9

0

Share

How to steer when the rear of the car veers to the left while reversing?

When the rear turns to the left, steer to the right. When the rear turns to the right, the steering method is the same as when moving forward. When the rear veers to one side, if the body leans to the left, you need to move to the right to correct it.

2

4

Share

Why does the Honda UR-V sell less than the Guan Dao?

What are the symbols for the internal and external air circulation in the Magotan?

Is It Worth Repainting If the Hood Paint Is Chipped by a Stone?

Where is the rear panel located?

What is the function of a car air conditioner's evaporator?

What to do if the reversing camera has poor contact?

How to steer when the rear of the car veers to the left while reversing?

What is a 4S Store?

What is Clutch Free Play?

What driving mode is generally used for urban driving?

What Causes Severe Engine Shaking in Reverse Gear While Running Normally in Forward Gear?