Why does the Haval M6 Plus shake when idling with the air conditioning on?

What Causes the Malfunction Light to Illuminate After Replacing a Car Battery?

The reason the malfunction light illuminates after replacing a car battery is that disconnecting the battery to replace it clears the driving data stored in the vehicle's computer, including system correction data such as throttle opening and fuel injector spray volume. The specific reasons and solutions are as follows: Driving Data Cleared: After replacing the battery, previously stored data such as throttle opening and fuel injector spray volume are reset to factory settings. However, since carbon deposits may have accumulated in components like the throttle body, fuel injectors, and combustion chamber, deviations from the factory settings can lead to issues such as improper air-fuel mixture. Solution: Continue driving for a while, and the vehicle's computer will gradually recalibrate and compensate for these data, restoring them to pre-replacement levels. At this point, the malfunction light should turn off. If the issue persists for an extended period, it is advisable to visit a 4S shop for inspection.

3

0

Share

Can bullet trains charge mobile phones?

Bullet trains can charge mobile phones. On some older bullet train models, there is a charging socket at both ends of each carriage. New bullet trains: On some newer bullet train models, there is a charging socket under each row of seats. Additionally, the sockets in first-class seats are more densely arranged than those in second-class seats. Extended information: Car charging: Cars can charge mobile phones, mainly because cars have built-in batteries. Common car battery voltages are 12 volts and 24 volts. Precautions: When charging a mobile phone in a car, it is recommended to avoid the following time periods: first, before the car is started; second, the moment the car is started; and third, after the car has been turned off.

18

2

Share

What are the symptoms of excessive pressure in a car's air conditioning system?

There are two symptoms of excessive pressure in a car's air conditioning system: first, the cooling effect of the air conditioner deteriorates; second, the increased working pressure of the compressor causes it to overheat, leading to intermittent operation or complete failure. Excessive refrigerant: Release some or all of the refrigerant and then refill it. Excessive air conditioning oil: Release all the refrigerant, use a machine to extract the excess oil, and then refill the refrigerant. Poor heat dissipation in the air conditioning condenser: Clean the surface stains and the condenser pipes, and check the cooling fan to see if it operates at high speed. The opening of the air conditioning expansion valve or expansion tube is too small: Replace the expansion valve or expansion tube, thoroughly clean the air conditioning pipes, and replace the dryer if present.

16

1

Share

What are the reasons for refrigerant leakage in car air conditioning?

Refrigerant leakage in car air conditioning is generally caused by damaged pipe joint seals. The specific reasons and solutions are as follows: Damaged pipe joint seals: Damaged seals in air conditioning pipe joints cause refrigerant leakage during transportation. Solution: Replace the new sealing ring to solve the problem. Evaporator mold: Mold on the evaporator leads to poor sealing, causing refrigerant leakage. Solution: Regularly clean the evaporator and components of the refrigeration system. If refrigerant leaks, replenish it promptly. Compressor failure: Failure of the air conditioning compressor results in poor sealing of components, allowing refrigerant to leak from gaps. Solution: Visit a repair shop or 4S store for inspection and repair. If damage is confirmed, the compressor needs to be replaced.

5

1

Share

Where is the engine of the Great Wall H6 produced?

The Great Wall H6 uses a turbocharged engine provided by Shenyang Aerospace Mitsubishi, so this engine is domestically produced. The engine model specifications used in the Great Wall H6 are: GW4G15B, 1.5T version engine with a maximum power of 124kW and a maximum torque of 285Nm; 2.0T version engine with a maximum power of 169kW and a maximum torque of 385Nm. For daily maintenance of the Great Wall H6 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust system and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid failures, change the oil periodically based on usage conditions and keep the oil level moderate; When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

6

3

Share

Is a Vehicle License Required for Vehicle Release from Mortgage?

Vehicle release from mortgage does not require bringing the vehicle license. Documents needed for release: To release a vehicle from mortgage, you need to bring the vehicle registration certificate, purchase invoice, vehicle annual inspection certificate, insurance certificate, loan clearance proof, the bank's organization code certificate and power of attorney, as well as a power of attorney authorizing the client to handle the mortgage release process. Ownership belongs to the lending institution: The process of releasing a vehicle from mortgage must be completed at the local vehicle management office. Before the vehicle is transferred, it does not belong to the individual; full ownership remains with the lending institution. Joint application by both parties: Applying for mortgage release registration requires both the vehicle owner and the mortgagee to apply together, submitting their identity proofs along with the vehicle registration certificate.

8

1

Share

Why does the Haval M6 Plus shake when idling with the air conditioning on?

What Causes the Malfunction Light to Illuminate After Replacing a Car Battery?

Can bullet trains charge mobile phones?

What are the symptoms of excessive pressure in a car's air conditioning system?

What are the reasons for refrigerant leakage in car air conditioning?

Where is the engine of the Great Wall H6 produced?

Is a Vehicle License Required for Vehicle Release from Mortgage?

Is the Possibility of Vehicle Self-ignition High After Installing LED Lights?

What is the reason for one electric car window malfunctioning?

How Much is the Residual Value of a Scrapped Car Generally?

Is it common to fail the Subject 2 driving test twice?