Why Does the Haval H9 Steering Make Abnormal Noises?

1 Answers
DelLila
07/25/25 3:35am
The abnormal noise in the Haval H9 steering system may be caused by the ball joint of the steering linkage. Additionally, check for loose fixing screws, examine if the cross shaft is loose causing the noise, and finally, inspect for internal wear in the steering gear. Reasons for heavy steering in the Haval H6: For hydraulic power steering, check if the power steering fluid is low. If it is, refill it to the normal range. If the fluid level is adequate, inspect whether the power steering pump belt is too loose, or if the fluid is too dirty, leading to poor flow. Generally, it should be replaced every 2 years or 60,000 kilometers. Also, check the tire pressure. Adjusting the steering wheel in the Haval H9: Push the adjustment lever below the steering column to the lowest position. Move the steering wheel up, down, forward, and backward to ensure you can see all the gauges and indicators on the instrument panel. Then, push the adjustment lever up to lock the steering wheel. Try moving the steering wheel to confirm it is securely locked.
Was this review help?
15
3
Share
More Forum Discussions

What is the thickness of a car cover?

The suitable thickness for a car cover is 6-8 MIL. Here is a detailed introduction about car covers: 1. Overview: Car covers, commonly known as car clothing, are outer covers made of canvas or other flexible and wear-resistant materials according to the dimensions of the car. They serve as protective gear for cars. Their features include being anti-dirt, anti-dust, and waterproof. Their function is to protect the car paint and slow down the aging process of the paint. 2. Additional Information: A car cover consists of three parts: the body, the buckle straps, and the spring hooks. The front buckle strap has a closed design, while the rear buckle strap has an open design. It cannot be removed without a dedicated key. The main production material for car covers is PVC waterproof fabric. High-quality car covers even have acid-proof and flame-retardant functions.
18
5
Share

What Causes the Thumping Sound in the Chassis When Braking?

Braking with a thumping sound in the chassis is caused by: 1. The metal in the brake pads being too hard, generating noise during braking; 2. Uneven brake discs, which are prone to produce noise when braking; 3. Protrusions on the edges of the brake discs due to natural wear; 4. Malfunctions in the braking system or loose connecting parts in the chassis; 5. Electronic linkage between the braking system and the automatic transmission. The automobile chassis consists of four parts: the transmission system, the running system, the steering system, and the braking system. Its function is to support and install the automobile engine and its various components and assemblies, forming the overall shape of the automobile, receiving the power from the engine to make the automobile move and ensuring normal driving.
18
1
Share

Where is the Air Filter of Volkswagen Lamando Located?

Volkswagen Lamando's air filter is located inside the glove compartment in front of the front passenger seat. The Volkswagen Lamando is a compact car with an exterior body length of 4598mm, a width of 1826mm, and a height of 1425mm, with a wheelbase of 2656mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 96 kW and a maximum torque of 225 Nm. This vehicle is a 4-door, 5-seater sedan with a fuel tank capacity of 51 liters and a trunk capacity ranging from 480 to 1150 liters. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a rear suspension employing a multi-link independent suspension.
1
4
Share

Go to the store for crystal coating or do it yourself?

Go to the store for crystal coating. Car crystal coating provides a reliable paint sealing technology for the car paint, offering efficient and long-lasting protection to prevent environmental impacts on the paint color. Functions of crystal coating: Crystal coating is a hard protective layer specifically designed for key areas of a car, including the paint surface, glass, tires, rims, seats, engine, interior, and exterior trim. It primarily serves to protect the paint from stains and scratches. Basic requirements for crystal coating: The fundamental requirement for crystal coating is that the material used must be SIO2 inorganic, capable of forming several structures on the applied surface. Typically at the molecular nano-level, it forms an isolation layer on the surface through the action of high-molecular polymers. This isolation layer has functions such as UV resistance, oil resistance, low surface energy, and hydrophobicity, thereby protecting the paint surface.
3
5
Share

When Can a New Car Go on the Highway?

New cars can go on the highway directly. When driving on the highway, you need to carry your ID card, vehicle license, and driver's license. Pre-drive checks: Focus on fuel, engine oil, tire pressure, lights, etc., and plan your route in advance. It is recommended to have a driver with at least 3 years of driving experience accompany you. Speed limits: The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Maintain distance: Control your speed and try to keep a safe distance from the vehicle in front. Proper lane changing: Do not cross multiple lanes at once. Before changing lanes, observe the traffic carefully, use turn signals, and honk to alert other vehicles.
3
4
Share

Where is the OBD port on Dongfeng Fengguang 330?

Dongfeng Fengguang 330's OBD port is located behind the glove compartment on the passenger side. You can access the interface by removing the glove box. OBD (On-Board Diagnostics) is a vehicle diagnostic system that continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. It will immediately issue a warning if any condition that may cause excessive emissions is detected. The Dongfeng Fengguang 330 has body dimensions of 4365mm in length, 1720mm in width, and 1790mm in height, with a wheelbase of 2725mm. It features front-engine, rear-wheel drive (FR) layout, with MacPherson strut front suspension and rear spiral spring non-independent suspension. The vehicle structure is of unibody construction.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.