Why does the Haval H6 suddenly fail to start?

In which year did Chery acquire Land Rover?

Chery did not acquire Land Rover; the two companies have a cooperative relationship. Chery Jaguar Land Rover Automotive Co., Ltd. was established in November 2012, jointly funded by Chery Automobile Co., Ltd. and British Jaguar Land Rover, with a 50:50 equity ratio, making it the first high-end automotive joint venture between China and the UK. Below is more information about Chery: 1. Brands under Chery: Chery's automotive brands include Chery, Karry, Qoros, Cowin, and two high-end brands, Jaguar and Land Rover. 2. Development of Chery Automobile: Chery Automobile Co., Ltd. was established on January 8, 1997, and is one of the most representative independent brand automotive companies that grew through self-innovation after China's reform and opening-up. Over the 16 years since its establishment, the company has consistently adhered to independent innovation, gradually establishing a complete technology and product R&D system, and has created a series of well-known product brands in China, such as Fengyun, QQ, Eastar, Tiggo, and Arrizo. Additionally, its products are exported to over 80 countries and regions worldwide, achieving a certain level of brand recognition globally.

6

5

Share

Is the Order of the Subject 2 Test Based on the Appointment Sequence?

Subject 2 test item sequence is not fixed in every location. Some places have reversing into a garage as the first item, while others arrange it as the last item. Generally, the sequence is arranged based on the design of the Subject 2 test site. Below is a detailed introduction to the Subject 2 test: 1. Introduction: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and is the abbreviation for the field driving skills test subject. The test items for cars C1 and C2 include five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve (commonly known as the S-curve). 2. Teaching objectives: Master the basic driving operation essentials and possess the basic ability to control the vehicle; proficiently master the basic methods of field and on-site road driving, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.

13

4

Share

Is It Necessary to Add Engine Anti-Wear Additives for a New Car?

It is not necessary to add engine anti-wear additives during the first maintenance of a new car. Because the first maintenance may occur just after or even before the break-in period, during which the new car is not suitable for using engine anti-wear additives. At this stage, the car requires the driver to operate it correctly for proper vehicle break-in, ensuring smoother performance in the future. Using anti-wear additives at this time is not only wasteful but may also create dependency for the vehicle. Below are some precautions for the first maintenance: 1. Generally, the first maintenance only requires an oil change and filter replacement. If the service suggests replacing other parts, the customer should be cautious to avoid being deceived. The first maintenance is for a new car, and if too many components are replaced or added, it raises questions about the car's quality. 2. During the first maintenance, ask the 4S shop technician to perform basic vehicle inspections, such as checking the car's coolant, fuel filter, air filter, power steering fluid, etc., to ensure they meet specifications. 3. Before the first maintenance, it’s best to review the vehicle maintenance manual and follow its instructions to avoid being misled by the 4S shop.

9

4

Share

How to Reset the Wrench Light on Great Wall Pickup Fengjun 5?

To reset the wrench light on the Great Wall Pickup Fengjun 5, follow these steps: 1. Turn off the ignition switch, ensuring the vehicle is in the off state. 2. Simultaneously press the left and right arrow buttons on the steering wheel, then turn the ignition to the power-on state and hold for more than 3 seconds. The dashboard will display whether the maintenance has been reset. 3. Press and hold the SET button on the center console for more than 3 seconds to confirm. 4. Finally, press the MODE button on the dashboard to complete the maintenance reset. Additional information: 1. Maintenance items for the Fengjun 5 include engine oil and oil filter, air filter, cabin air filter, fuel filter, brake fluid, transmission fluid, power steering fluid, spark plugs, and timing belt. Diesel models do not have spark plugs, and the timing belt must be replaced every 80,000 kilometers. 2. According to the maintenance manual, the first service for the Fengjun 5 is at 4,000 kilometers, followed by maintenance every 6,000 kilometers or six months, whichever comes first. Engine oil, oil filter, and transmission fluid should be replaced every 12,000 kilometers, the fuel filter every 24,000 kilometers, and the cabin air filter every 20,000 kilometers.

16

0

Share

What Causes the Noise in the Power Steering Pump?

The noise in the power steering pump may be caused by the pressure relief valve operating, a clogged filter, a faulty power steering pump, or insufficient power steering fluid. Below are the specific details: Pressure Relief Valve Operating: The sound produced when the pressure relief valve is operating is normal; Clogged Filter: A clogged filter can cause the pump to make noise. Over time, the oil reservoir with a filter can become clogged with dust, debris, or oil sludge, requiring the filter to be cleaned; Faulty Power Steering Pump: Issues with the power steering pump, such as air intake, leaking high-pressure oil pipes, or problems with the oil reservoir, require repair at a 4S shop; Insufficient Power Steering Fluid: If there is insufficient power steering fluid, simply add more. When adding fluid, be careful not to mix different types of oil, as mixing power steering fluids can accelerate oil degradation, increase mechanical wear, and potentially lead to mechanical failures.

7

5

Share

How to Start a Haval H6 with the Key?

Haval H6 key starting method: 1. Remove the cover, insert the key, and ignite to start. 2. During this starting process, the remote control must always remain near the keyhole. There is a coil around the keyhole that can sense the decoding information in the remote control chip. 3. After the vehicle starts, the remote control can be removed. Extended content: The method for replacing the key battery is as follows: 1. Press the button of the mechanical key on the remote control to open the mechanical key; hold the mechanical key end with your right hand, with the remote control logo facing upward. Use your left thumb to pry open the battery cover at the middle seam of the remote control. A slight force is enough to pry open one end of the battery cover. 2. Then, use your hand to lift the other end of the battery cover along the lifted side, and the battery cover can be opened to reveal the battery. 3. Insert a toothpick into the notch at the edge of the battery and gently pry to remove the battery. The battery is a 3V CR2032 alkaline battery. Install the new battery into the battery slot, close the battery cover, and gently press the battery cover to ensure it is securely closed.

8

3

Share

Why does the Haval H6 suddenly fail to start?

In which year did Chery acquire Land Rover?

Is the Order of the Subject 2 Test Based on the Appointment Sequence?

Is It Necessary to Add Engine Anti-Wear Additives for a New Car?

How to Reset the Wrench Light on Great Wall Pickup Fengjun 5?

What Causes the Noise in the Power Steering Pump?

How to Start a Haval H6 with the Key?

Do I need to register modified car exhaust pipes with the vehicle management office?

Can Power Steering Fluid Be Mixed?

Can a leaking power steering pump be repaired?

What Components Make Up a Steering Axle?