Why does the Geely Vision X6 shake when starting?

3 Answers
AlejandroMarie
07/29/25 12:25pm
Geely Vision X6 shaking when starting may be caused by the following reasons: Insufficient engine oil: Inadequate oil supply or poor oil quality can make the engine work harder, leading to vehicle shaking. Check the oil level and cleanliness. Spark plug issues: If the spark plug is burnt, has excessive gap, or becomes loose, the vehicle may shake. Park and carefully inspect the spark plug for integrity. If you have tools, you can remove the spark plug for inspection. If unable to do it yourself, promptly visit a repair shop. Insufficient tire pressure: Or balance problems can easily cause the vehicle to shake. Carefully check the tire pressure and look for abnormal wear. If found, it indicates tire imbalance, and you should promptly go to a repair shop for maintenance.
Was this review help?
2
3
Share
DiGrant
08/13/25 11:31pm
I recently experienced starting shudder issues with my family's Geely Vision X6, which is particularly annoying, especially at traffic lights. When starting, the car feels like it's shaking like an earthquake. The most common cause is wear in the clutch system. The Vision X6 is a manual transmission, right? If the clutch disc is aging or slipping, it can lead to poor power transmission and noticeable shuddering at low RPMs. It could also be an issue with the engine's spark plugs, such as excessive carbon buildup or electrode erosion, affecting ignition efficiency. Additionally, loose suspension components or an unbalanced driveshaft can exacerbate this problem. I recommend checking the transmission fluid and clutch components as soon as possible. Avoid sudden acceleration during normal driving to extend the lifespan of these parts. If you're really unsure, it's best to take the car to a professional repair shop for diagnosis. Using a diagnostic tool to read fault codes is more reliable. Don't underestimate this shuddering—ignoring it long-term can increase fuel consumption and even damage the engine.
Was this review help?
16
4
Share
Expand All
JoannaDella
10/09/25 3:38am
I think the starting vibration issue with the Geely Vision X6 is quite typical, and I often discuss such minor car problems with my friends. There are several reasons: clutch failure is the most common, especially when the clutch disc wears out or becomes thin after prolonged use in a new car, making it prone to vibration during startup. Secondly, there might be an issue with the engine's ignition system, where aging spark plugs or leaking ignition coils can cause unstable combustion. Another reason could be insufficient fuel supply, such as clogged fuel injectors or low fuel pump pressure. I've also noticed that if the chassis components like ball joints or swing arms are loose, it can exacerbate the vibration. It's recommended to start with simple checks like tire pressure and fuel quality, ensuring the air filter isn't dirty. If the problem is severe, don't hesitate to go directly to a 4S shop for a computer test of the engine data. Timely repairs can prevent the risk of a breakdown.
Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the Ford Titanium?

Titanium refers to the Ford Tourneo, an MPV model under the Ford brand. In the context of the Ford Edge, Titanium signifies the highest trim level configuration. Exterior Dimensions: The vehicle measures 4972mm in length, 2032mm in width, and 1987mm in height, with a wheelbase of 2933mm. Powertrain: The Tourneo is equipped with a 2.0T EcoBoost engine delivering a maximum output of 204 horsepower and peak torque of 300 Newton-meters. Brand Overview: Ford is one of the world's most renowned automobile manufacturers, established in 1903 and headquartered in Dearborn, Michigan. The company owns prestigious automotive brands including Ford and Lincoln.
4
1
Share

What is the ground clearance of the Ford Kuga?

The ground clearance of the Ford Kuga is 180mm. This vehicle is a compact SUV under Changan Ford, with dimensions of 4524mm in length, 1838mm in width, and 1685mm in height, and a wheelbase of 2690mm. The body type is a 5-door, 5-seat SUV, equipped with a 6-speed automatic transmission. The Ford Kuga features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance is electric power-assisted, with front ventilated disc brakes and rear disc brakes. The parking brake type is electronic parking.
7
1
Share

How to Drive a Land Rover Range Rover?

Land Rover Range Rover features a one-button start system. Press the brake, and the gear shift is rotary knob-style, simply rotate to change gears. To shift into S mode (can also be done while driving), press down slightly and turn to S mode. Even in D mode or other modes, the system will automatically shift to P mode.
11
3
Share

What Causes Abnormal Noises When a Car Turns?

Reasons for abnormal noises when a car turns: 1. Tire damage. If small stones are stuck in the tire or nails puncture it, abnormal noises will occur when turning. In this case, the tire should be inspected and repaired. 2. Incorrect toe-in value. If the tire's toe-in value is incorrect, the front wheels will not be parallel, causing friction and abnormal noises when turning. In this case, the toe-in value should be rechecked, and the vehicle should undergo a four-wheel alignment. 3. Steering gear damage. If the steering gear is damaged, internal parts may rub, or the steering system may malfunction, leading to abnormal noises when turning. In this case, the car should be taken to a repair shop or 4S store for professional inspection and repair. 4. Brake pad damage. If the brake pads are severely worn, abnormal noises may also occur when turning. In this case, the brake pads should be replaced.
17
4
Share

How to Operate Automatic Transmission Gears?

Park (P): When parking, the gear is in this position. At this time, the wheels are mechanically locked to prevent rolling. The P gear should only be used when the vehicle is completely stopped. Reverse (R): Used for reversing. The safety button on the shift lever must be pressed to move the lever to the "R" position. Do not force the lever into the "R" position if the vehicle is not completely stopped. Neutral (N): Used for temporary stops (such as at a red light). To prevent the vehicle from rolling on a slope, always keep the brake pedal pressed when in N gear. Drive (D): In D gear, the transmission automatically shifts between 1st and overdrive (equivalent to 1st to 4th gears) based on speed and throttle conditions. This gear is used for normal road driving. Low (L): When going downhill or on long descents, shifting to this gear limits the car to the lowest gear automatically.
18
5
Share

What are the differences between the Santana and the Gran Santana?

The differences between the Santana and the Gran Santana: 1. Different body styles: The Santana has a sedan body style; the Gran Santana has a hatchback body style. 2. Different dimensions: The Santana measures 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm; the Gran Santana measures 4282mm in length, 1706mm in width, and 1489mm in height, with a wheelbase of 2603mm. The Santana is positioned as a compact car, with a total of 14 models available, including both National V and National VI emission standards. In terms of power, all models are equipped with a 1.5L inline 4-cylinder naturally aspirated engine, paired with either a 5-speed manual or 6-speed automatic transmission, and all models feature front-wheel drive.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.