Why does the fault light come on after replacing the car battery?

How to Downshift and Slow Down in an Automatic Transmission Car?

Methods and precautions for downshifting and slowing down in an automatic transmission car: 1. When going downhill, shift the gear to 1st or L (Low) gear and use the foot brake in combination. However, frequent use of the foot brake may cause the braking system to overheat, leading to poor braking performance. 2. Never shift to N (Neutral) gear when going downhill. Coasting in neutral is harmful to the automatic transmission. Since the automatic transmission requires lubrication, shifting to N while driving prevents the oil pump from supplying oil properly for lubrication, causing the internal components of the transmission to overheat and resulting in damage. Therefore, coasting in neutral is extremely harmful to the automatic transmission.

13

3

Share

How Long Does a Wheel Alignment Take?

Generally, new vehicles should undergo a wheel alignment after 3 months of driving. Subsequently, it is recommended to perform a wheel alignment every 10,000 kilometers, after tire rotation, and following any collision. Below is an introduction to wheel alignment: 1. Proper wheel alignment ensures flexible steering, comfortable seating, maintains straight-line driving, extends tire lifespan, and reduces road-induced vibrations. Additionally, a wheel alignment is necessary when the vehicle exhibits symptoms such as heavy steering, pulling to one side, abnormal tire wear, or steering wheel vibration. 2. Wheel alignment is based on the four-wheel parameters of the vehicle, adjusting them to ensure optimal driving performance and a certain level of reliability.

4

3

Share

Should the Clutch Pedal Be Kept Depressed While Driving?

It is not necessary to keep the clutch pedal depressed while driving. Releasing the clutch during steady driving will not stall the engine, and pressing the accelerator does not require depressing the clutch. Here are several situations when the clutch pedal should be used: 1. When starting the car: Quickly depress the clutch pedal and then release it to the half-engaged position. 2. When shifting gears: Reduce the speed to match the corresponding gear and quickly depress the clutch. The clutch pedal should be pressed and released swiftly without lingering in the half-engaged state, as this can accelerate clutch wear. Additionally, ensure proper coordination with the accelerator. 3. When stopping the car: Depress the clutch when the vehicle speed is below 15km/h, then use the brake to bring the car to a complete stop.

15

0

Share

What is the difference between GLE and ML?

The differences between the Mercedes-Benz GLE and ML are as follows: 1. Comparing the GLE-400-4MATIC model with the ML-400-4MATIC Luxury model, it is found that the GLE-400-4MATIC adds 7 configurations on the basis of the ML-400-4MATIC model, yet its price is lower. It can be said that the GLE offers better value for money compared to the ML. 2. The GLE-400-4MATIC is equipped with 20-inch dual 5-spoke light alloy wheels, while the ML-400-4MATIC Luxury model comes with 19-inch 5-spoke AMG light alloy wheels.

9

3

Share

How to Solve the Sunroof Noise Issue in Raeton CC?

Here are the solutions for addressing the sunroof noise issue in Changan Raeton CC: 1. The presence of noise indicates severe lack of lubrication in the sliding rails. Check for any deformation in the rails and perform timely lubrication maintenance. 2. After inspecting the sunroof sliding rails, you can add some lubricating oil. 3. Check the fastening condition of the sunroof, as looseness may also cause noise. 4. The sunroof sealing strip, being exposed to rain or sunlight for extended periods, is prone to aging. Rubber conditioner can temporarily restore the performance of the sealing strip. Open the sunroof fully and spray rubber conditioner onto the sealing strip.

3

5

Share

Where is the thermostat located in a car?

Automotive thermostats are generally installed at the upper water outlet of the engine. Below is relevant information about the thermostat: 1. The thermostat must maintain good technical condition; otherwise, it will severely affect the normal operation of the engine. If the main valve of the thermostat opens too late, it will cause the engine to overheat. If the main valve opens too early, the engine's warm-up time will be too short, resulting in the engine temperature being too low. 2. The thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature to ensure the engine operates within an appropriate temperature range, which can help save energy. This is because the engine consumes more fuel at low temperatures and causes greater damage to the vehicle, including the easy formation of carbon deposits and a series of related problems.

11

5

Share

Why does the fault light come on after replacing the car battery?

How to Downshift and Slow Down in an Automatic Transmission Car?

How Long Does a Wheel Alignment Take?

Should the Clutch Pedal Be Kept Depressed While Driving?

What is the difference between GLE and ML?

How to Solve the Sunroof Noise Issue in Raeton CC?

Where is the thermostat located in a car?

What to Pay Attention to When Installing Tire Pressure Monitoring During Tire Replacement?

How to Turn on High Beam?

How Often Should the Coolant in a Sedan Be Replaced?

What are the 4HLc and 4LLc central differential systems?