Why does the engine suddenly accelerate automatically?

2 Answers
SanIsabelle
07/24/25 4:47am
Car automatic acceleration is caused by the car floor mat problem, which leads to the car throttle being stuck by the floor mat, resulting in unexplained acceleration. The specific reasons and precautions are as follows: Specific reasons: When driving, acceleration and normal driving require continuous pressing of the throttle. When driving, reducing speed requires releasing the throttle. In theory, releasing the throttle reduces the engine's fuel supply to idle levels, lowering the RPM to idle speed. However, the inertia force of the car at high speed is transmitted to the engine through the drivetrain, causing the engine to act as a brake and slow the car down. At this point, the engine is being pushed to operate above idle speed, and the fuel-saving device cuts the engine's fuel supply to zero. Precautions: Car floor mats are an environmentally friendly automotive interior component that integrates five main functions: water absorption, dust absorption, stain removal, sound insulation, and protection of the main carpet. Car floor mats are interior decorations that protect the cleanliness inside and outside the car, adding aesthetic and comfortable touches. The water absorption, dust absorption, and stain removal properties of car floor mats can effectively prevent residual moisture and dirt from the soles of shoes from causing slippage between the clutch, brake, and throttle, avoiding safety hazards and reducing the likelihood of interior contamination and damage. After all, cleaning floor mats is more convenient and economical than cleaning the interior.
Was this review help?
12
4
Share
DelJordan
08/11/25 12:27am
That time when my car's engine suddenly went crazy while driving, my heart was in my throat. I quickly hit the brakes, shifted to neutral, turned off the engine, and slowly pulled over to the side of the road. The reason could be that the accelerator pedal got stuck under the floor mat, which has happened in many car models; or it might be due to excessive carbon buildup in the throttle body, causing it to stick in the open position; or perhaps the throttle position sensor was faulty, sending incorrect signals that made the computer think it needed to accelerate. Bugs in the electronic control system can also cause this, especially in older cars with outdated software. When driving, I always pay extra attention to keeping the floor mats clean and properly secured. Every six months, I check engine-related components like sensors and wiring harnesses, using a diagnostic tool to look for any hidden trouble codes. Safety comes first—this is not something to take lightly. If it happened on the highway, the consequences could be unthinkable. Towing it to a professional shop for repairs is worth the cost—better than risking an accident.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

When Should Brake Pads Be Replaced?

Brake pads should generally be replaced after the vehicle has traveled 80,000 kilometers or approximately 4 years, although the replacement time may vary depending on the vehicle's usage. Situations that require brake pad replacement include: 1. When the thickness of the brake pads is reduced to below 0.5 centimeters; 2. When the vehicle produces squealing or hissing noises during braking; 3. If you notice reduced braking efficiency, the brake pedal feels heavy, or the braking distance becomes excessively long, it's time to replace the brake pads. Brake pads are a crucial component of the automotive braking system, typically composed of a steel plate, friction material, and an insulation layer. They function by creating friction against the brake disc when the brakes are applied, thereby achieving the braking effect. As a key safety component, the quality of all braking performance is decisively influenced by the condition of the brake pads.
19
2
Share

What are the engine displacements available for the Bora?

The Bora is available with two engine displacements: 1.5L and 1.4L. The 1.5L naturally aspirated engine, coded as EA211-DMB, delivers a maximum power of 83 kW and a peak torque of 145 Nm. The 1.4L turbocharged engine, coded as EA211-DJS, produces a maximum power of 110 kW and a peak torque of 250 Nm. The Bora is a compact car under the FAW-Volkswagen brand, with dimensions of 4663 mm in length, 1815 mm in width, and 1462 mm in height, and a wheelbase of 2688 mm. In terms of exterior design, the Bora features Volkswagen's signature front grille, winged-style headlights, and redesigned rear contours and taillights compared to the current model. The body lines are more streamlined, and it comes with stylish aluminum alloy wheels.
16
5
Share

How to open the hood of a Mercedes-Benz GLC260?

Method to open the hood of a Mercedes-Benz GLC260: 1. Press the button on the driver's door to open the door and enter the cockpit; 2. Locate the hood release button inside the cockpit; 3. Pull the red hood release lever above the left foot to unlock the hood; 4. Additionally, pull the lever at the front of the engine compartment to fully open the hood. In terms of dimensions, the Mercedes-Benz GLC260 measures 4764 mm in length, 1898 mm in width, and 1642 mm in height, with a wheelbase of 2973 mm. As for power, the Mercedes-Benz GLC260 is equipped with a turbocharged engine that delivers a maximum horsepower of 197 hp, a maximum torque of 320 Nm, and a maximum power output of 145 kW.
2
5
Share

How to reset the maintenance light on the Great Wall Florid?

Great Wall Florid maintenance light reset method: 1. Use an automotive computer diagnostic tool to reset the maintenance light; 2. Manual reset method: Press and hold the reset button A while stepping on the brake, turn the ignition switch to ON, until the display screen enters the setup menu, then select the oil life reset option. The Great Wall Florid is a five-seat family car independently developed by Great Wall Motors. The car's dimensions are 3907mm in length, 1694mm in width, and 1521mm in height, with a wheelbase of 2368mm. In terms of appearance, the front face design of the Great Wall Florid is quite distinctive, featuring an integrated U-shaped dynamic styling, with a waterfall-style grille blended into the overall bumper, and the slightly raised nose adorned with a shiny new Great Wall emblem.
19
4
Share

How to Replace the Battery in a Changan Ford Focus Car Key?

The steps to replace the battery in a Changan Ford Focus car key are as follows: 1. Press the button on the key to pop out the mechanical key; 2. Use a flat-head screwdriver to pry open one side of the car key's outer shell; 3. Remove the old battery, replace it with a new one, and then snap the key's outer shell back into place. The Changan Ford Focus is an A-class family sedan under the Ford brand. The car's dimensions are 4647 mm in length, 1810 mm in width, and 1468 mm in height, with a wheelbase of 2705 mm. In terms of suspension, the front suspension of the Changan Ford Focus is a MacPherson independent suspension, while the rear suspension is a torsion beam non-independent suspension.
11
3
Share

How long does the battery of Nissan Sylphy last?

Nissan Sylphy's battery generally lasts for 3 to 5 years. Several factors that affect the battery life include the vehicle's condition, road conditions, and the driver's habits. The Nissan Sylphy uses a battery with the model number 46B24L, which has a warranty period of one year. The Nissan Sylphy is a compact car under Dongfeng Nissan, with dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height, and a wheelbase of 2712 mm. In terms of power, the Nissan Sylphy is equipped with a naturally aspirated engine, which delivers a maximum horsepower of 135 hp, a maximum torque of 159 Nm, and a maximum power of 99 kW.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.