Why does the engine idle intermittently with gasping?

1 Answers
SanMakayla
07/30/25 5:33am
Reasons for unstable engine idling and intermittent gasping: 1. The air-fuel mixture is too rich or too lean, resulting in incomplete combustion. 2. Low ignition voltage, insufficient energy, or leaking high-voltage wires. 3. Fuel system pressure is too low. 4. Poor fuel injector performance, with uneven fuel injection among cylinders. 5. Incorrect sensor signals causing a mismatch between the engine control unit's fuel injection signals and actual operating conditions. For rough idling, shaking instability, and gasping, follow these inspection steps: 1. Check for fault codes; if present, inspect according to the fault code content and determine idle speed settings as needed. 2. Check if the cylinder high-voltage wires are incorrectly connected or if any cylinder is not functioning. 3. Verify the proper operation of the idle control valve and ensure the idle air bypass passage is unobstructed.
Was this review help?
18
4
Share
More Forum Discussions

Why are used Mercedes SLK cars so cheap?

Yellow-label vehicles coupled with expensive maintenance costs make them sell cheaply. Below are the relevant explanations: 1. Used cars: Used cars refer to motor vehicles that have been registered with the public traffic management authorities, have not yet reached the national scrapping standards or are within their economic lifespan, and can still be used. 2. Target audience: The biggest selling point of used cars is their affordability. With the same amount of money needed to buy a new car, one can purchase a higher-grade used car. Therefore, from the perspective of reducing car purchase costs, buying a used car is a wiser choice for the general public. Additionally, some beginner drivers who have just obtained their licenses but are not yet proficient might consider buying a used car to practice their driving skills.
18
5
Share

What causes the crackling sound in car audio?

Car audio crackling can be caused by incorrect wiring connections or speaker distortion. Below are the explanations and solutions: 1. Audio wiring issues: Problems may arise from the speakers or amplifier quality. Using high-quality audio files can prevent crackling caused by poor file quality. Solution: Check all audio wiring connections to ensure secure interfaces, optimize the surrounding environment, and keep electromagnetic radiation devices away from the audio system. 2. Speaker distortion: Distortion occurs when speakers are damaged. A speaker's main structure consists of a magnet and coil. The current drives the coil to move up and down within the magnet with minimal clearance. Since the coil is connected to the speaker cone, this movement creates vibrations that produce sound. Solution: Replace the speaker with a new one.
1
5
Share

Subject 1: Three Yielding Rules for Turning

Subject 1: Three Yielding Rules for Turning are as follows: 1. Yield to vehicles from the right: Give way to vehicles coming from the right side of the road. 2. Yield to vehicles going straight: Turning motor vehicles must yield to motor vehicles going straight. When motor vehicles and non-motor vehicles meet on a narrow bridge, non-motor vehicles should slow down and pass by keeping to the right. 3. Yield to vehicles turning left: For vehicles traveling in opposite directions, vehicles turning right must yield to vehicles turning left. The premise of the three yielding rules is that when motor vehicles pass through an intersection without traffic signals, traffic police direction, or any traffic signs and markings, they should stop and observe before entering the intersection, and then follow the three yielding rules to determine the right of way.
2
5
Share

What is a Coupe car?

Coupe is the emblem of the Hyundai Coupe. Below are the relevant introductions: 1. History: Coupe is a representative of fashionable sports cars among Korean cars. This car was first launched in Korea in the 1990s, named as a small sports car by Hyundai Motor Company. Upon its release, it was highly favored by female consumers. In 1997, it entered the Chinese market and underwent some new designs to cater to Chinese consumers' preferences. Innovations in the design of front and rear lights and bumpers gave this car a strong coupe flavor, significantly enhancing its overall high-end appearance. 2. Performance: The Hyundai Coupe was launched with high cost performance, fashionable appearance, and strong handling, winning the affection of many young and trendy individuals. Due to its compact and cute design, many female car owners particularly like it. The sales of this car are also impressive, achieving good results in Asia, Europe, and America. Some owners have also taken this model to the modification market for upgrades, adding more sporty elements to the car. A Coupe with more sporty characteristics can perform better on the road than a two-door sedan.
6
0
Share

How to Remove the Trunk Liner Fasteners?

Removing trunk liner fasteners involves using a specialized tool or a small flathead screwdriver to pry open the center dome, then wedging it out with a tool or pulling it out by force. Below are precautions for removing liner fasteners: 1. Use a flathead screwdriver to gently pry: You can slowly pry with a flathead screwdriver and then pull it out. There is also a professional tool for removing fasteners. It doesn't matter if the fastener breaks, as they cost only a few cents each and can be replaced if damaged. 2. Use specialized tools: Many fasteners on car interior components have teeth that go in smoothly but are reverse when coming out, making them difficult to remove. With the right tool, removing fasteners becomes very simple.
19
4
Share

Reasons for Low Fuel Rail Pressure (P0087) in Magotan

Magotan P0087 low fuel rail pressure is most likely caused by a damaged fuel pump or high-pressure pump pressure sensor, excessive plunger wear or common rail pressure regulator failure, fuel line blockage, or excessive water content in the fuel leading to low rail pressure. Related information: 1. Fuel pump function: It draws gasoline from the fuel tank and delivers it to the carburetor float chamber through pipelines and fuel filters. It is precisely because of the fuel pump that the fuel tank can be placed away from the rear of the engine and below the engine. 2. Fuel pump classification: According to different driving methods, it can be divided into two types: mechanically driven diaphragm type and electrically driven type.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.