Why does the electric tricycle not move when the throttle is twisted with no response?

2 Answers
SpencerLynn
09/09/25 2:37am
Reasons why the electric tricycle throttle cannot be twisted are as follows: Check the electric vehicle battery: If the output is too low, it indicates the battery is faulty and needs immediate replacement. Check the throttle handle: Use a wire to short-circuit the positive terminal and signal wire of the throttle handle. If the vehicle moves, it means the throttle handle is faulty and needs immediate replacement or repair. Check the controller: You can short-circuit the positive 5V of the throttle handle wire. If the throttle handle twists, it indicates the controller is functioning properly. The simplest method is to smell the controller for any burnt odor, which would indicate controller damage. Check the motor condition: Poor contact of the motor carbon brushes can also cause the electric vehicle to not move.
Was this review help?
6
1
Share
MiguelLynn
09/20/25 7:32am
I had the same issue with my electric tricycle last time. Turning the throttle had no response at all, which was really frustrating. I guessed it might be because the battery was dead, but even after charging, it still wouldn't move. Later, I found out that the wire connector was loose. I opened it up and tightened it myself, and it worked fine after that. It could also be that the sensor inside the throttle handle is broken. This thing is connected to the control box. That time, I spent fifty bucks to replace it with a new one. Another common problem is a blown fuse. You can check the small box near the battery to see if the fuse is broken, and just replace it with the same model. I've also heard that controller failure can cause this. Water damage or aging of the control box can lead to this issue. If nothing works, don't force it open. It's safer to push it to a repair shop and let a professional take a look, rather than messing around yourself and potentially damaging the vehicle.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

Is 110 Degrees Celsius Normal for Magotan Engine Oil Temperature?

Magotan engine oil temperature at 110 degrees Celsius is normal. Below is relevant information about engine oil temperature: 1. Introduction: The normal operating temperature of engine oil is generally between 70-90 degrees Celsius, with some local areas being higher, but usually not exceeding the coolant temperature. Additionally, at higher speeds, the temperature may rise to around 100°-110°C. However, if there is a consistent tendency to exceed 120°C, immediate inspection is required. 2. Temperature Increase: Insufficient oil quantity or excessively high oil level can easily lead to excessively high oil temperature. When the diesel engine's coolant temperature is too high, it cannot promptly cool components and dissipate heat, causing the temperature of heated parts to rise excessively, which will also result in increased oil temperature.
3
4
Share

Where is the ignition switch of Audi cars?

Audi car ignition switch is located at the front left of the gear position. Audi is a German automobile brand, and its brands include A1, A3, A4, A4L, A5, A6, A7, A8, Q5, Q7, Q8. Taking the Audi A4L 2020 35TFSI Fashion Dynamic model as an example, its body dimensions are 4858mm in length, 1847mm in width, 1439mm in height, with a wheelbase of 2908mm. The Audi A4L 2020 35TFSI Fashion Dynamic model is equipped with a 2.0T turbocharged engine, matched with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150 hp and a maximum power of 110 kW.
8
4
Share

What does the engine's holding effect mean?

Engine's holding effect refers to engaging a lower gear to slow down the engine speed, lifting the throttle pedal without depressing the clutch, and utilizing the compression resistance generated by the engine's compression stroke, internal friction, and intake/exhaust resistance to brake the driving wheels. According to engine working principles, it can be divided into: 1. Internal combustion engine: Fuel burns inside the engine; 2. External combustion engine: Fuel burns outside the engine; 3. Gas turbine: Combustion produces high-pressure gas, which drives the turbine blades to rotate; 4. Jet engine: An engine that directly generates reactive thrust by high-speed airflow ejected from the nozzle.
5
2
Share

How to Replace the Battery of a Dash Cam?

Steps to replace the battery of a dash cam: 1. Unscrew and open the back cover; 2. Pry open the control panel connected to the buttons; 3. Remove the screws on the circuit board, cut the old battery from the wires, and replace it with a new one to complete the process. A dash cam is an instrument that records images, sounds, and related information during vehicle travel, consisting of a main unit, speed sensor, and data analysis software. Functions of a dash cam: 1. Protect the legal rights of drivers; 2. Playback recorded footage to assist traffic police in handling accidents; 3. Record scenic views during road trips.
10
3
Share

What are the reasons for the car engine malfunction light to come on?

Car engine malfunction light comes on due to: 1. Oxygen sensor failure; 2. Poor engine maintenance; 3. Use of inferior fuel; 4. Poor combustion of air-fuel mixture; 5. Dirty air filter; 6. Air flow sensor failure; 7. Spark plug carbon buildup; 8. Damaged coolant temperature sensor; 9. Engine misfire. An engine is a machine that converts other forms of energy into mechanical energy, applicable both as a power generator and as the entire machine including the power unit. According to its working principle, it is divided into: 1. External combustion engine: Fuel burns outside the engine; 2. Internal combustion engine: Fuel burns inside the engine.
6
3
Share

Do I Still Need to Go to the DMV to Choose a License Plate After Selecting One Online?

After selecting a license plate number online, you do not need to go directly to the DMV the next day to choose a new number. Here are some related details about license plates: 1. Temporary License Plates: A temporary license plate is issued by the vehicle management department of the public security bureau when a car has not yet been officially registered due to pending procedures. 2. License Plate Authority Code: The first character of a license plate is a Chinese character, followed by an English letter. When assigning English letter codes for prefecture-level administrative regions, the letters I and O are skipped. O is often used for police vehicles or government agencies (though this does not apply to the military or armed police, where the letter O may be used differently).
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.