Why Does the Cooling Fan Keep Running During New Energy Vehicle Charging?

How to Turn on the Rear Fog Light of a Car?

The method to turn on the rear fog light of a car is by rotating the light lever on the left side of the steering wheel. For some models, the fog light switch is located in the light control assembly under the dashboard and needs to be pressed to activate. The prerequisite for turning on the rear fog light is that the parking lights or the vehicle's headlights must be on. The replacement method for the car's rear fog light is as follows: 1. Open the vehicle's trunk and remove the fixing screws on both sides of the luggage compartment; 2. Loosen the fixing screws of the rear wheel fenders, pry open the clips under the car, and then pry open the tail light clips; 3. After removing the rear trim panel, check for any wire harness connections, then remove the rear fog light trim panel; 4. Install the fog light socket onto the original trim panel and connect the wire harness.

5

3

Share

Which gear should an automatic transmission car be in when warming up?

When warming up an automatic transmission car, it should be placed in P (Park) gear because P gear provides sufficient safety by locking all four wheels of the car to prevent rolling. Additionally, the engine speed in P gear is relatively higher, allowing the car to warm up faster. The ultimate purpose of warming up a car is to quickly activate various internal fluids in a short period. To achieve this, you can choose to idle the vehicle in place. During idling, the engine rotates at a slower speed, allowing the fluids to be gradually activated by the engine. Since the piston movement is not particularly fast, it won't cause significant damage to the engine. The warm-up time should ideally be controlled between half a minute to one minute, after which you can start driving the car at a steady speed. In the past, warming up used to take three to five minutes before driving, which caused considerable damage to the car and also led to lower engine air intake, incomplete fuel combustion, and more carbon buildup.

5

1

Share

How to Remove the Interior Door Trim Panel of a Car?

Car interior door trim panel removal method is as follows: Pull off the A-pillar trim panel, pry off the door handle trim panel and the screw cover of the door lock, then pull the trim panel upwards, remove three screws with a tool, pull out the window switch trim panel upwards, and pull the door panel from the bottom of the door panel and remove it. Extension: The door provides access for the driver and passengers to enter and exit the vehicle, isolates external interference, reduces side impact to a certain extent, and protects the occupants. The aesthetics of the car are also related to the shape of the door. The quality of the door is mainly reflected in the door's anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators.

10

3

Share

What Does Car Decoration Include?

By adding some accessories to improve the aesthetics of the car's exterior and interior, this behavior is called car decoration. Below are its contents: Exterior Decoration: The exterior decoration of a car mainly involves decorating the roof, windows, body periphery, and wheels. The main contents include: special spray painting decoration of the car's paint surface, decorative stripes and protective film decoration, front wind deflector and rear wing decoration, sunroof installation decoration, windshield decoration, body kit decoration, partial body decoration, wheel decoration, chassis spray plastic protection decoration, and chassis LED light strip decoration. Interior Decoration: The interior decoration of the car body mainly involves decorating the driver's cabin and passenger cabin, collectively referred to as the interior. The main contents include: car ceiling lining decoration, sun visor decoration with light filter, side panel and door inner panel decoration, dashboard decoration, seat decoration, floor decoration, and interior accessory decoration.

9

1

Share

Does Tesla Have Heated Rearview Mirrors?

Tesla is equipped with heated rearview mirrors, which are integrated with the rear windshield defroster under a single button. The button features an icon of three upward-curving arrows paired with a rectangular shape. Pressing this button activates the heating function. Heated rearview mirrors are particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for frequent manual wiping by the driver and thereby reducing driving hazards. How to use the heated rearview mirror function: The heated rearview mirror function typically has two activation methods. One is combined with the electric rearview mirror adjustment knob—simply rotate the knob to activate it. The other is located on the air conditioning control panel—press the heating button to turn it on. No manual angle adjustment is required, as the driver's side has a dedicated control button. Principle of the heated rearview mirror function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature (usually between 35-60°C) within minutes, distributing heat across both left and right mirrors. Meanwhile, due to the temperature rise and evaporation, water droplets on the mirror surface shrink, and fog gradually dissipates, effectively clearing frost and condensation. In heavy rain, the effect may diminish and become less noticeable. Precautions for using the heated rearview mirror function: The heating principle involves electric heating wires embedded in the mirrors, which consume significant power. Ensure the car is running when using this function to avoid draining the battery in a stationary state, which could prevent engine startup. Other methods for defogging rearview mirrors include: Window ventilation: Crack open both side windows slightly to create airflow between the interior and exterior, reducing temperature differences and allowing fog to dissipate slowly. Adjusting the car's air conditioning to the appropriate setting can also direct warm air toward the mirrors for defogging.

1

0

Share

Can You Drive on the Highway with a Spare Tire?

You can drive on the highway, but non-full-size spare tires should not exceed 80 km/h. The classification and precautions for spare tires are as follows: Classification: Full-size spare tires have no restrictions on mileage or speed, while non-full-size spare tires can only be used on non-driving wheels and must not exceed a maximum speed of 80 km/h. Run-flat tires, when punctured, will not lose air or lose air very slowly, maintaining their driving profile, and the tire beads will remain fixed on the rim, ensuring the car can drive stably for a long time or temporarily. Precautions: When using a spare tire, pay attention to speed, avoid prolonged use, perform regular maintenance, replace it periodically, and keep it away from oil products.

18

4

Share

Why Does the Cooling Fan Keep Running During New Energy Vehicle Charging?

How to Turn on the Rear Fog Light of a Car?

Which gear should an automatic transmission car be in when warming up?

How to Remove the Interior Door Trim Panel of a Car?

What Does Car Decoration Include?

Does Tesla Have Heated Rearview Mirrors?

Can You Drive on the Highway with a Spare Tire?

What to Pay Attention to When Buying a Used Car?

What is the appropriate level to fill the coolant to?

How Many Points Are Deducted for Drifting While Driving?

Can a Newly Installed Pedal on a Car Be Registered?