Why does the Civic fail to start and display a 'Check Brake System' message?

What does the 6S inspection of a vehicle refer to?

6S stands for Sort (SEIRI), Set in order (SEITON), Shine (SEISOU), Standardize (SEIKETSU), Sustain (SHITSUKEI), and Safety (SAFETY). Later, because safety is also a very important item in factory management, and the English pronunciation of safety also starts with S, it was added to the 5S and collectively referred to as 6S. The following is a detailed introduction: 1. "Sort": It is to distinguish between the things that are needed and not needed (excess tools, materials, semi-finished products, finished products, stationery, etc.) in the company (factory). Move the unnecessary things away from the workplace, concentrate and classify them for identification management, so that the workplace only retains the necessary things, making the workplace neat and beautiful, and allowing workers to work in a comfortable environment. 2. "Set in order": It is to quantify, locate, and identify the things that have been sorted out and are needed in the workplace, and store them where they can be easily accessed when needed, so as to reduce the time wasted in searching for items. 3. "Shine": It is to make the workplace free of garbage and dirt, and the equipment free of dust and oil stains, that is, to regularly clean the things that have been sorted and set in order to maintain a state where they can be used at any time. This is the first purpose. The second purpose is to visually inspect, touch, smell, and listen during the cleaning process to discover the root cause of abnormalities and improve them. "Shine" is to clean both the surface and the inside (visible and invisible places). 4. "Standardize": It is to maintain the clean state after sorting, setting in order, and shining, and more importantly, to find the root cause and eliminate it. For example, the source of dirt in the workplace, the oil leakage point that causes oil stains on the equipment, and the looseness of the equipment. 5. "Sustain": It is for all employees to participate in the work of sorting, setting in order, shining, and standardizing, maintaining a neat and clean working environment, and to formulate various relevant standards for everyone to comply with in order to do this work well, so that everyone can develop the habit of complying with the standards. 6. "Safety": It is to eliminate or prevent the sources of safety accidents in the workplace (such as oil stains on the ground, blocked aisles, blocked safety doors, ineffective fire extinguishers, materials and finished products piled too high with the risk of collapse, etc.).

18

1

Share

What is the displacement of 2500cc?

2500cc is equivalent to a 2.5L displacement. The term "2500CC" refers to the exhaust volume of a motorcycle engine's combustion chamber, where CC is the volume unit for cylinder displacement, with 1CC being equal to 1ml. In the automotive field, where "L" is the mainstream unit for displacement, a 2500CC motorcycle would correspond to a 2.5L displacement in a car. According to relevant standards in China, different displacements correspond to the following vehicle types: 30CC and below are classified as fuel-powered mopeds. 30-50CC are classified as light motorcycles. Above 50CC is classified as a standard motorcycle. Standard motorcycles can be further divided into: entry-level motorcycles defined as 250-400CC. Mid-range motorcycles are defined as 500-750CC. Heavy motorcycles (liter-class) are defined as 1000CC and above. Motorcycle licenses are categorized into D, E, and F classes. Motorcycles come in two types: two-wheeled and three-wheeled. In addition to directly applying for a beginner's two-wheeled or three-wheeled motorcycle license, one can also apply for an additional two-wheeled or three-wheeled motorcycle license. Applicants can use their resident ID card to apply for a motorcycle driver's license anywhere in the country, take the exam, and upon passing, receive their motorcycle driver's license. For daily maintenance of a motorcycle engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard being no lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any lubricating oil will degrade during use. After a certain mileage, its performance deteriorates, leading to various engine issues. To prevent malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, the filter may burst or the safety valve may open, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

18

5

Share

How to Pay Vehicle Purchase Tax on Mobile Phone?

Mobile payment for vehicle purchase tax prompts that invoice content cannot be empty. All items shown on the invoice must be filled in truthfully, such as the vehicle name, purchase price, applicable purchase tax rate and amount, etc. As long as the filling meets the requirements, the system will automatically approve it.

9

5

Share

How to Set Up the Lift Mode on a Jaguar XJL?

Open the driver's side door. Press down on the brake pedal. Push the one-touch start button to start the engine. Pull up the chassis lift switch. Hold for a while to activate the lift mode.

16

2

Share

What to Do When Lug Nuts Won't Come Off?

You can pour a lubricating solvent like diesel fuel onto the lug nuts. Appropriately using your foot strength can increase the tightness of the nut, but avoid kicking blindly as it may directly damage the nut or bolt. Use tools like a hammer to strike the back of the tire wrench, making the lug nut and tool fit tighter, thereby helping to remove the lug nut.

9

1

Share

What should I do if I drove a distance without fully releasing the handbrake?

This can significantly impact the handbrake, causing it to become increasingly loose. For vehicles with alarm systems, it's better as there will be a handbrake warning light to indicate that the handbrake needs to be tightened. When driving, make sure to fully release the handbrake all the way down.

18

5

Share

Why does the Civic fail to start and display a 'Check Brake System' message?

What does the 6S inspection of a vehicle refer to?

What is the displacement of 2500cc?

How to Pay Vehicle Purchase Tax on Mobile Phone?

How to Set Up the Lift Mode on a Jaguar XJL?

What to Do When Lug Nuts Won't Come Off?

What should I do if I drove a distance without fully releasing the handbrake?

What is the speed of 50 mph?

How Long Does It Take to Receive a Red Light Violation Ticket?

Will there be any problems with gasoline if the car is not driven for a long time?

What are the "Unspoken Rules" of Subject 3 Driving Test?