Why does the car water temperature warning light come on?

2 Answers
LeCaroline
07/25/25 4:31am
The reasons why the car water temperature warning light comes on are: 1. Insufficient antifreeze in the coolant reservoir; 2. Damage to the coolant level sensor or signal interruption due to aging of the engine wiring harness. The normal operating temperature for a car's water temperature is between 80 to 90 degrees Celsius. Consequences of high car water temperature include: 1. Accelerated engine wear and reduced lubrication effectiveness of the oil; 2. Risk of the car radiator bursting due to excessive heat; 3. Increased temperature of the engine block, which over time can lead to deformation or damage to the cylinder head and cylinder block. Causes of high car water temperature are: 1. Poor engine cooling; 2. Accumulation of dirt inside and outside the radiator from prolonged use without cleaning, affecting coolant circulation and heat dissipation; 3. Damage to the fan or other cooling components.
Was this review help?
15
5
Share
DelFrancisco
08/10/25 5:24pm
Last time my car's temperature warning light came on was because the coolant was low. It was a hot day with traffic congestion, and the engine temperature kept rising rapidly, triggering the warning light. Later, a check revealed that the water pump also had some issues, causing slower water circulation. Additionally, the thermostat was stuck and wouldn't open, preventing the cooling system from circulating. The risk of a faulty fan can't be ignored either, such as insects clogging the radiator fins. If these minor issues aren't fixed promptly, high engine temperatures could lead to engine failure, and the repair costs would be extremely expensive. I recommend regularly checking the coolant level, at least once a month, and being extra careful before long trips. Avoid driving on rough roads too often to prevent damage, and keep the engine running steadily.
Was this review help?
16
5
Share
Expand All
More Forum Discussions

What is the meaning of the Lexus logo?

Lexus car logo uses the uppercase letter "L" from the car name "Lexus", surrounded by an ellipse. The ellipse symbolizes the earth, indicating that Lexus cars are spread all over the world. Here is part of the introduction about the Lexus logo: 1. Appearance: The Lexus trademark consists of two parts: a graphic trademark and a text trademark. Its graphic trademark does not adopt the common form of three nested ellipses, but inlays the first uppercase letter L of the English word Lexus in an ellipse, which is embedded in the middle of the radiator. 2. Meaning: The tail badge has the text trademark Lexus, implying that the car gallops on roads all over the world.
7
5
Share

What does Mercedes-Benz A7 maintenance mean?

Car maintenance light reminds the owner that the car needs maintenance. The wrench light is the car maintenance light, which is a reminder function set by the manufacturer to alert the owner to perform maintenance at certain mileage or time intervals. It appears in the form of a dashboard or screen message or indicator light to notify the owner that the vehicle requires maintenance. Extended information about car maintenance is as follows: 1. Introduction: Car maintenance refers to the regular preventive work of inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Purpose: The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent faults, slow down the deterioration process, and extend the service life.
11
1
Share

Why does the car Bluetooth connection lose sound after a few seconds?

If the car Bluetooth playback loses sound after 30 seconds, this situation is mostly caused by unstable Bluetooth performance. If this happens immediately when the phone connects to the car, it is likely due to incompatibility between the phone and the car's Bluetooth. Excessive connection records: When there are too many connection records, Bluetooth is more susceptible to interference. If the phone has connected to many Bluetooth devices, the signal may be affected, causing the Bluetooth to switch between multiple devices and resulting in connection interruptions. Car electronic devices: If there are too many powered-on electronic devices in the car, it can easily affect the car Bluetooth's signal reception. In this case, try turning off some of the electronic devices. Bluetooth lag: Unstable Bluetooth performance can lead to lagging, causing situations where the song is playing but the speakers have no sound.
11
4
Share

Will the engine of a water-damaged car be damaged?

As long as the engine is not started and the water level does not reach the air intake of the engine's intake system, the engine will not be harmed. Here is an introduction to engine water ingress: 1. Hazards: Once water enters the engine, it can cause the engine to stall. In severe cases, water may be sucked into the engine's interior, leading to permanent damage. Never attempt to restart the engine after water ingress; it is recommended to call for rescue immediately. 2. Handling method: If the vehicle stalls due to water ingress during wading, immediately turn off the ignition switch. Do not attempt to restart the engine. Move the vehicle to a safe location, preferably with the front higher than the rear, to allow water in the exhaust pipe to drain out and avoid damaging the three-way catalytic converter and muffler.
15
1
Share

Where is the battery located for jump-starting an older Audi A8?

Audi A8's battery is located under the cover at the bottom of the trunk. Here are detailed introductions about Audi A8: 1. Overview: Audi A8 is the most high-end luxury car in Audi's lineup, competing with Mercedes-Benz S-Class and BMW 7 Series. Audi A8 was the first to use an all-aluminum body, which is not only sturdy and durable but also reduces body weight, providing the car with more powerful performance. 2. Others: The standard seating capacity is 4, with a top speed of 237km/h, and the seat material is leather. The drive type is front-engine four-wheel drive or front-engine front-wheel drive. The body weight ranges from 1930 to 2185 kilograms. The body material is all-aluminum.
10
1
Share

Why Can't the Key Be Pulled Out After a Buick Car Stalls?

Buick stalls after the key can not be pulled out for reasons such as gear position. The following are the specific reasons why the key cannot be pulled out after a Buick car stalls: 1. Gear position reason: When the automatic transmission is in P gear, the automatic transmission does not really return to its position. Sometimes it has returned to its position but does not touch the electronic sensor. 2. There are foreign objects in the gear slot: Some debris is often placed in the car, which can cause foreign objects to be in the gear slot. Once there are foreign objects, the key cannot be turned when inserted, and it will also affect driving. In addition, rust in the gear slot is also one of the main reasons why the key cannot be pulled out.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.