Why does the car USB drive always get damaged when starting the car?

1 Answers
DeBrooklyn
07/30/25 2:58am
It is mainly powered by the car's internal battery. The USB drive can only be used when the battery has sufficient power. When the battery is almost out of power, the navigation system cannot start working. Normal charging will resolve this issue. Prolonged operation, insufficient internal storage space of the MP4, excessive fragmentation, or too much cache can all prevent the navigation system from starting. Clearing the cache can help. Consider if the MP4 is faulty. It is recommended to replace it or consider whether the software needs an upgrade or is corrupted. Reinstalling or upgrading the software should resolve the issue. The car USB drive can be damaged due to improper operation. It is recommended to format the USB drive, select the FAT32 format, and then directly place music files in the USB drive. Avoid placing other items or folders.
Was this review help?
7
4
Share
More Forum Discussions

How to Cancel the Automatic Tilt-Down Feature of BMW X3's Rearview Mirror When Reversing?

Here are the steps to cancel the automatic tilt-down feature of BMW X3's rearview mirror when reversing: 1. The setting switch for the BMW X3's rearview mirror tilt-down feature is located next to the window lift buttons. The button that can be toggled left and right is the tilt-down setting switch; 2. Toggling the rearview mirror adjustment switch to the left turns the feature on, while toggling it to the right turns it off. The steps to set up the automatic tilt-down feature for the BMW X3's rearview mirror when reversing are as follows: 1. Start the engine and ensure the rearview mirror adjustment switch is set to the "left"; 2. You must have the correct seat memory settings (including the rearview mirror angle). Recall the seat memory to return the right mirror to its memorized position; 3. Toggle the rearview mirror adjustment switch to the "right," then shift into R gear (the car does not need to move, just hold the brake); 4. Manually adjust the right rearview mirror to the desired "tilt-down position"; 5. Shift back to N gear (P gear is also acceptable), then toggle the rearview mirror adjustment switch back to the left; 6. Shift into R gear again to test, and the right rearview mirror should tilt down to the previously adjusted position; 7. Shift back to D/N/P gear, and the right rearview mirror should correctly return to its memorized position, completing the setup.
2
4
Share

How often should the Accord's cabin air filter be replaced?

The replacement interval for the Accord's cabin air filter is 20,000 kilometers or 21 months. Below are detailed explanations of the cabin air filter's functions: 1. Filters impurities, microscopic particles, pollen, bacteria, industrial exhaust, and dust from the outside air entering the cabin to maintain interior air quality. 2. Ensures the filter tightly adheres to its housing, preventing unfiltered air from entering the cabin. It separates solid contaminants such as airborne particles, dust, pollen, and abrasive particles. 3. Prevents windshield fogging, ensuring clear visibility for drivers and passengers, thereby enhancing driving safety. 4. A heavily soiled cabin air filter can reduce the air conditioning system's cooling efficiency, decrease airflow, and most critically, compromise the vehicle's interior air quality.
7
0
Share

What transmission does the Tiguan L use?

The Tiguan L's transmission varies by engine type. The 1.4T model is equipped with a DQ250 6-speed wet dual-clutch transmission, while all 2.0T models come with a 7-speed dual-clutch transmission. Specifically, the 2.0T low-power version uses the DQ380 transmission, and the 2.0T high-power version features the DQ500 transmission. Additional details: 1. In terms of power, the new Tiguan L offers two engine options: the 330TSI and 380TSI, equipped with the third-generation EA888 turbocharged engines in 1.8T and 2.0T displacements, respectively. The 1.8T engine delivers a maximum output of 180 horsepower and a peak torque of 300 Nm, while the 2.0T engine produces 220 horsepower and 350 Nm of torque. Additionally, the 380TSI model comes with Volkswagen's 4MOTION all-wheel-drive system and features a driving mode selection function. 2. In terms of configurations, the 1.8T model (330TSI) includes standard features such as xenon headlights, automatic headlight activation, LED taillights, roof rails, a multifunction steering wheel, a 4/6 split-folding rear seat, a Clean-Air-PM2.5 dust filter, automatic rain-sensing wipers, keyless start, an engine auto start-stop system, an electronic parking brake with auto-hold function, rear parking radar/camera, and heated exterior mirrors.
17
1
Share

What engine does the Golf R use?

The Golf R uses a 2.0-liter inline 4-cylinder turbocharged engine. Here is some extended information about the Golf R: 1. It is paired with a 6-speed dual-clutch transmission, delivering a maximum horsepower of 256 HP, a maximum power of 188 kW, and a maximum torque of 330 Nm. 2. There are various types of engines, with naturally aspirated engines and turbocharged engines being the most common. 3. The Golf R is a compact car with body dimensions of 4296 mm in length, 1788 mm in width, and 1471 mm in height, and a wheelbase of 2636 mm.
2
1
Share

How to Distinguish Between the 2018 and 2019 Chevrolet Cavalier Models?

The following are methods to distinguish between the 2018 and 2019 Chevrolet Cavalier models: 1. Check the Vehicle Identification Number (VIN). The letter following the 9th digit of the VIN indicates the model year: 'KV' or 'KW' signifies the 2019 model, while 'JV' indicates the 2018 or earlier models. 2. Inspect the tires. There are four consecutive numbers on the tires, such as '2118', which means the tire was produced in the 21st week of 2018. 3. Examine the transmission system. The 2019 Cavalier added a 6-speed wet dual-clutch transmission, which the 2018 model does not have. 4. Look at the engine. The 2019 Cavalier introduced two new 1.0T 3-cylinder turbocharged engines with a maximum horsepower of 120 HP and a maximum torque of 165 N·m. The 2018 model does not have a 3-cylinder engine. 5. Compare the prices. The official guide price for the 2019 Cavalier 1.0T 3-cylinder engine version is slightly higher than that of the 2018 Cavalier.
15
3
Share

What is the rear tire model of the Porsche 718?

The rear tire model of the Porsche 718 is 265/40ZR19. The first number, 265, represents the tire width of 265mm. The number 40 indicates the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width. The letter R stands for radial tire, and 19 represents the rim diameter of 19 inches. The Porsche 718 has a top speed of 210km/h, accelerates from 0 to 100km/h in 4.58 seconds, and has a fuel consumption of 7.8L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.