Why does the car stall when braking in second gear while turning?
2 Answers
The reason the car stalls when braking in second gear while turning is: the brake is applied too suddenly and too hard, which causes the speed to drop too low, leading to the car stalling and causing severe jerking. When preparing to enter a turn, it is necessary to control the speed in advance by braking first and then decelerating. For wide turns, reduce speed slightly, while for sharp turns, decelerate quickly. When turning in congested areas, shift into first or second gear, lightly press the clutch, and use the car's idle speed to turn, while keeping your foot on the brake to avoid emergencies. Always signal your turn in advance and try to stay on the left side of the road to provide convenience for vehicles behind and those turning right.
I've encountered this issue way too many times! Friends who drive manual transmissions will definitely relate. There are mainly two reasons for stalling when braking in second gear during a turn: the engine RPM is too low to handle the load. During a turn, the car speed is naturally slower, and second gear requires higher RPM. Suddenly hitting the brakes is like slamming the brakes on the engine. At this point, the engine RPM drops rapidly, falling below the idle line and immediately shutting down. This is especially true for small-displacement cars, where even a slight resistance from turning the steering wheel can easily cause a stall. Later, I learned my lesson—if I feel the speed dropping below 20 km/h before a turn, I always downshift to first gear in advance. Alternatively, I lightly press the accelerator with my right foot to keep the RPM stable and prevent it from dropping too much. Now, driving a manual has become muscle memory for me—glancing at the tachometer before a turn is more effective than anything else.
