Why does the car's instrument pointer swing violently when starting?

1 Answers
LeahRose
07/29/25 6:56pm
The reason why the car's instrument pointer swings violently when starting is that the battery is low on power. One situation is that there were power-consuming items left on when the car was last turned off, such as lights or the radio, which caused the battery to drain. You can ask someone for a jump start, and the battery will recharge after the car starts. Another situation is that the battery is damaged. A jump start is only a temporary solution, and it's best to replace the battery. The instrument panel can be equipped with external lighting and can also be attached to a console. It comes in various forms and specifications, allowing for the installation of various instruments as needed, or combining various instrument panels into a single unit as required. The car instrument panel is a device that reflects the working conditions of various vehicle systems. Common indicators include the fuel indicator, washer fluid indicator, electronic throttle indicator, front and rear fog light indicators, and warning lights.
Was this review help?
16
4
Share
More Forum Discussions

How to Deal with a Car Covered in Snow?

Methods for handling a car covered in snow: 1. Start the vehicle to allow it to warm up in advance, which also helps raise the water temperature quickly, benefiting later defogging and de-icing of the windows; 2. After getting in the car, start the vehicle but avoid turning on the air conditioning system immediately, as the water temperature hasn't reached the optimal level yet; 3. Use specialized snow removal tools to clear the external snow. Thick snow on the car body can be removed directly with a snow brush or cardboard, but be careful to avoid contact with the car paint as much as possible, since even specialized tools can damage the paint surface. After snowfall, it's essential to clean the snow off the car promptly to prevent it from freezing and blocking windows, spray nozzles, and other parts.
2
0
Share

Why does the car make a clicking sound but fail to start when turning the ignition?

The reason why the car makes a clicking sound but fails to start when turning the ignition is mainly due to a dead battery. You can try push-starting the car to get the engine running and charge the battery, but this is only a temporary solution. The car may not start again after being turned off, so it is advisable to go to a repair shop as soon as possible to check and replace the battery. Daily precautions include: 1. Avoid parking the car in an open parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent it from freezing and getting damaged; 2. The car battery should be charged regularly. If left unused for a long time, the battery will gradually discharge on its own and eventually become unusable. Therefore, the car should be started periodically to charge the battery.
12
0
Share

How to Determine if a Carburetor is Damaged?

Methods to determine if a carburetor is damaged: 1. Remove the air filter, ensure there is gasoline in the carburetor, and start the vehicle. If the vehicle doesn't start, spray carburetor cleaner directly into the carburetor's inlet. If the vehicle starts, it indicates a carburetor malfunction causing poor fuel supply; 2. If the car's carburetor is damaged, the ignition system's spark plug may burn out, and black smoke may appear when starting the vehicle. This can be observed by checking the ignition system; 3. Severe fuel wastage can lead to unstable throttle response, inability to supply fuel properly, incomplete combustion, and in severe cases, failure to start or weak driving performance. Additionally, the inability to filter impurities from gasoline can cause severe carbon buildup on the valve gasket and spark plug.
1
3
Share

What Causes Engine Noise and Vibration?

Reasons for engine noise and vibration: 1. Aging or loosening of engine mounts: Engine mounts are designed to reduce vibration and absorb shocks during engine operation while securing the engine. Once they age or become loose, engine vibration becomes noticeably abnormal. 2. Engine misfire: This refers to one or more cylinders in the engine not functioning properly, characterized by intermittent exhaust gas flow and severe shaking of the exhaust pipe, sometimes accompanied by popping sounds. 3. Carbon buildup in the engine: This includes carbon deposits in the cylinders, throttle body, spark plugs, and intake system. Excessive carbon buildup reduces ignition energy and intake efficiency, leading to symptoms like engine vibration and poor acceleration. 4. Fuel system malfunction: Using incompatible fuel grades can reduce engine power output and performance. Alternatively, clogged fuel tank vent holes, fuel tank switches, fuel filters, or fuel lines between the tank and carburetor can restrict fuel supply, resulting in a lean air-fuel mixture and engine vibration.
8
4
Share

What Kind of Intersections Do Not Allow U-Turns?

Intersections where U-turns are not allowed: 1. Locations with no U-turn signs or markings prohibit U-turns; 2. Locations with no left-turn signs or markings prohibit U-turns; 3. U-turns are prohibited at railway crossings; 4. U-turns are prohibited on pedestrian crosswalks; 5. U-turns are prohibited on bridges; 6. U-turns are prohibited at sharp curves; 7. U-turns are prohibited on steep slopes; 8. U-turns are prohibited in tunnels; 9. U-turns are prohibited in sections prone to danger. According to the Road Traffic Safety Law, vehicle U-turns must be conducted without hindering the safety of other road users and pedestrians crossing the street.
18
1
Share

How many body colors does the BYD e3 have?

The BYD e3 offers a total of 4 body colors, which are Crystal White, Mountain Gray, Flame Red, and Sky Blue. The BYD e3 is a compact car under the BYD brand, with dimensions of 4450mm in length, 1760mm in width, and 1520mm in height, and a wheelbase of 2610mm. The BYD e3 features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. In terms of power, the BYD e3 is equipped with a permanent magnet synchronous motor, delivering a maximum horsepower of 95, a total power of 70 kW, and a total torque of 180 Nm.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.