Why does the car not move when accelerating after starting?

1 Answers
StAngelina
08/31/25 2:24am
Reasons for the car not moving when accelerating include: Intake system issues: The air filter is the most frequently needing cleaning and replacement among the three filters. If the air filter is clogged or the throttle system is blocked, the air intake will decrease, leading to incomplete combustion and reduced power, resulting in the car not moving even when the accelerator is pressed hard. Ignition system issues: If the car does not move and emits black smoke when accelerating, it is likely that there is a problem with the ignition system. Carbon buildup on the spark plugs of the ignition system can cause poor ignition, leading to reduced power and persistently high fuel consumption. To keep the car running smoothly, regular replacement of spark plugs is very important.
Was this review help?
19
4
Share
More Forum Discussions

How to Deal with Stabilizer Bar Noise?

To address stabilizer bar noise, replace the tie rod ends and connecting bushings to resolve the issue. The bar is secured to the frame via two rubber bushings in the middle and connected to the left and right suspension via tie rod ends at both ends. Vehicles with independent suspension have stabilizer bars at both the front and rear. Typically, the middle bushings and the tie rod ends at both sides are prone to aging, wear, and looseness, leading to noise when under stress. The full name of the stabilizer bar is the front shock absorber top link, which enhances the vehicle's structural rigidity, improves stability and balance during cornering, connects the two shock absorbers, and ensures balanced force distribution on both sides. This helps maintain vehicle stability during high-speed sharp turns or evasive maneuvers, preventing rollovers and improving driving safety. The stabilizer bar also helps inhibit body deformation.
1
1
Share

What is the maintenance interval for an automatic transmission?

The maintenance interval for an automatic transmission is every two years or after driving 50,000 kilometers. The main components of an automatic transmission include: the torque converter, mechanical transmission, hydraulic control system, electronic control system, and oil cooling system. It is a type of vehicle transmission that automatically changes gear ratios during driving, eliminating the need for manual gear shifting by the driver, and is also used in large equipment such as railway locomotives. The core control device of an automatic transmission is the hydraulic control unit, which consists of an oil pump, valve body, clutch, brake, and fluid passages connecting all these components. The valve body, a key component, serves as the control center of the automatic transmission. Its function is to regulate the oil pressure output by the oil pump to various actuators based on the load conditions of the engine and the drivetrain, thereby controlling the torque converter and the engagement and disengagement of clutches and brakes to achieve automatic gear shifting.
12
5
Share

How to Perform Light Reset Operation?

First, open the driver's side door and depress the brake pedal. Then press the one-touch start button to ignite the engine. Finally, adjust the button to the 'off' position to complete this operation.
9
1
Share

Does the Bin Yue have ambient lighting?

The Bin Yue is equipped with ambient lighting, which automatically turns on when the headlights are activated. Its purpose is to alter the appearance of the car's interior at night, enhancing the vehicle's nighttime recognition. It emphasizes and complements the interior design, reinforcing the overall styling lines and surfaces, making the interior more three-dimensional and visually expanding the interior space. The Bin Yue is Geely's first SUV model based on the BMA architecture. It measures 4330mm in length, 1800mm in width, and 1609mm in height, with a wheelbase of 2600mm. It is powered by a 1.5T three-cylinder engine jointly developed by Geely and Volvo, delivering a maximum power of 177 horsepower and a peak torque of 255 Nm, paired with a 7-speed wet dual-clutch transmission.
5
4
Share

How to Remove the Handbrake Lever Cover?

First, remove the front seats. Take off the entire black middle part of the handbrake. The part to be removed will then be exposed, and you can directly dismantle it.
4
1
Share

What is the maximum power of the WM ex5's electric motor?

WM ex5 adopts a permanent magnet synchronous motor with a maximum power of 160 kW, a maximum torque of 315 Nm, and a maximum horsepower of 218 hp. It is equipped with a ternary lithium battery and supports fast charging, with the shortest charging time of 0.5 hours, and slow charging taking at least 8.4 hours. WM ex5 is a pure electric intelligent SUV model from WM Motor, with a body length, width, and height of 4585mm, 1835mm, and 1672mm respectively, a wheelbase of 2703mm, and a range of 600km per hour. The suspension system features a front MacPherson independent suspension with a stabilizer bar and a rear variable cross-section torsion beam suspension.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.