Why does the car lose power when the air conditioner is turned on?

2 Answers
VanTanner
07/23/25 11:36pm
The reason why the car loses power when the air conditioner is turned on is that the air conditioner increases the engine load, which can lead to a clogged fuel filter. The solution is: If the car's fuel filter is clogged, it is necessary to go to the car's 4S shop or a repair shop to clean the filter in time. Below is an introduction to air conditioner maintenance: 1. Comprehensive inspection of the air conditioner: When using the air conditioner for the first time in summer, the air conditioning system should be checked first, such as checking the refrigerant and whether the air filter is too dirty through the reservoir, and whether there are foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioner: The air filter should be replaced regularly, otherwise the air conditioner will produce a musty smell. In addition, the condenser should also be cleaned regularly, and the water tank should be removed for thorough cleaning.
Was this review help?
15
2
Share
SebastianDella
08/10/25 7:30pm
When driving, feeling a lack of power after turning on the AC is quite common. The possible reason is that the AC compressor activates, consuming part of the engine's power, which adds an extra load to the car. Especially in the high temperatures of summer, the demand for cooling is high, and the engine has to drive both the AC and the car itself, resulting in sluggish acceleration. Another common issue is an aging power supply system, such as a weak battery or alternator. When there's insufficient electricity, the compressor struggles to operate, affecting the engine as well. It could also be due to a faulty compressor or a loose drive belt, making the entire system more energy-consuming. While driving, try setting the AC temperature slightly higher instead of immediately turning it to the lowest setting to reduce the load. Regular vehicle inspections, such as checking voltage during maintenance, can help avoid such issues. If the problem occurs frequently, it's best to visit a repair shop to ensure driving safety.
Was this review help?
1
1
Share
Expand All
More Forum Discussions

What are the effects of a faulty ambient temperature sensor?

The effects of a faulty ambient temperature sensor are as follows: 1. Unstable output signal: Taking the instrument as an example: If the temperature source itself is unstable, then the fault lies with the temperature source. If the instrument display is unstable, the fault is due to the instrument's poor anti-interference capability. 2. Large output error from the transmitter: This may be caused by improper factory settings of the sensor or the use of incorrect resistance wire in the temperature sensor, leading to range errors. 3. Increase or decrease in the measured medium temperature: A faulty ambient temperature sensor can cause sealing issues, possibly due to poor sealing of the temperature sensor or accidental welding of a small hole during installation. This situation generally requires replacing the sensor housing to resolve.
16
2
Share

Why Do Car Wash Shops Require Vehicle License?

Here are the relevant purposes for car wash shops requiring a vehicle license: 1. Insurance Renewal: After checking the insurance expiration date, a renewal specialist usually calls one month in advance to notify that the insurance is about to expire and needs renewal. From the renewal specialist's perspective: first, they want to avoid forgetting to renew. If the insurance expires while the vehicle is still in use and an accident occurs, the insurance company may be held accountable for not notifying the policyholder about the upcoming expiration. 2. Customer Data Collection: For example, if a phone number is registered on a platform, after completing the service offline, there might be an SMS notification asking: Are you satisfied with this service?
15
5
Share

What is the difference between learning to drive C1 and C2?

Here are the specific differences between a C1 driver's license and a C2 driver's license: 1. Concept: A C1 driver's license refers to a manual transmission license, while a C2 driver's license refers to an automatic transmission license. A C1 license allows you to drive both manual and automatic transmission vehicles, whereas a C2 license only permits driving automatic transmission vehicles. 2. Eligible vehicle types: A C1 license allows driving small and micro passenger cars, as well as light and micro trucks, and light, small, and micro special-purpose vehicles. A C2 license, on the other hand, permits driving small and micro automatic transmission passenger cars and light and micro automatic transmission trucks. 3. Medical examination requirements: For a C1 license, individuals aged 70 and above must undergo an annual medical examination, while for a C2 license, those aged 60 and above must have an annual medical check-up.
3
1
Share

Does Polishing a New Car Affect the Original Paint?

Polishing a car does cause a certain degree of damage to the paint surface. The process and purpose of vehicle painting are introduced as follows: Vehicle Painting Process: Cleaning, inspection, evaluation, and masking; masking and degreasing; removal of old paint; application of putty; sanding putty and old coating; degreasing and masking; application of primer; sanding intermediate primer. Purpose of Vehicle Painting: Protective Function: Automobiles are widely used, operate in a broad range of environments, and are frequently exposed to moisture, microorganisms, ultraviolet rays, and other acidic or alkaline gases and liquids. They may also suffer from abrasion or scratches, leading to damage. Applying paint to the surface can protect the car from such damage and extend its service life.
18
1
Share

Is it a violation to cross the stop line during a yellow light?

Crossing the stop line during a yellow light is considered a violation. Below are the specific regulations for motor vehicle traffic signals: 1. Green light: Vehicles are permitted to proceed, but turning vehicles must not obstruct the passage of straight-moving vehicles or pedestrians. 2. Yellow light: Vehicles that have already crossed the stop line may continue to proceed. 3. Red light: Vehicles are prohibited from proceeding. 4. Intersections without non-motor vehicle signals: At intersections without dedicated non-motor vehicle or pedestrian crossing signals, non-motor vehicles and pedestrians should follow the motor vehicle traffic signals. When the red light is on, right-turning vehicles may proceed provided they do not obstruct the passage of other vehicles or pedestrians.
5
2
Share

What engine is used in the Weichai Yingzhi 727?

Weichai Yingzhi 727 is equipped with a 1.5-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine of Yingzhi 727 delivers 112 horsepower and a maximum torque of 143 Nm. This engine can output maximum power at 6000 rpm and maximum torque at 4000 rpm. The engine features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block. This vehicle is an MPV model. The Yingzhi 727 is built on the Yingzhi 737 platform, inheriting the family design concept with its body styling. The vertical waterfall-style grille is accentuated with chrome elements and seamlessly integrates with the headlights.
14
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.